Merciless58
Well-Known Member
Hi guys
Just wanted to spread the love and share some good info,... if u knew this then good, if not, read...
Using a 2x2 tray, 6" square pots and tap water, u can convert your ebb and flow system to a multi site ebb cloner, works bestwith hydroton.
Under flourecent lights 24/0 , insert cuttings in hydroton, about half way through the small pots , enough so that when the table drains, it floods 1/4 of the stem,
flood and drain every hour for 15 minutes, and in 5-6 days, ROOOOOTS.
Hope this helps
Just wanted to spread the love and share some good info,... if u knew this then good, if not, read...
Using a 2x2 tray, 6" square pots and tap water, u can convert your ebb and flow system to a multi site ebb cloner, works bestwith hydroton.
Under flourecent lights 24/0 , insert cuttings in hydroton, about half way through the small pots , enough so that when the table drains, it floods 1/4 of the stem,
flood and drain every hour for 15 minutes, and in 5-6 days, ROOOOOTS.
Hope this helps