First grow with new setup

CurrentlyGreen

CurrentlyGreen

Member
Hi everyone, here is what I just started this morning:
I built a dwc using mostly current culture parts. I just plumbed it a little different than they do. I used a homemade aero cloner and used cyclone and clonex. I transplanted some Bruce Banner clones into hydro this morning. I am currently using cyco nutes and hlg bspec 550 light at abut 36 inches in a 4x4 tent. I am hoping I transplanted them correctly as I am new to this. Here are a couple of pics I took during the process. And comments would be greatly appreciated.
 

Attachments

CurrentlyGreen

CurrentlyGreen

Member
Hey everybody. Here are pics @ 1 week. Everything seems to be doing fine so far. Just changed out the res and gave em some fresh nutes. It’s running @ 5.8 and 1040ppm. The pH is moving up .1 per day. I’m wondering if I need to supplement with something with anything else or if Cyco has it completely covered. Any comments appreciated.
 

Attachments

Immastoner

Immastoner

Well-Known Member
CurrentlyGreen said:
Hey everybody. Here are pics @ 1 week. Everything seems to be doing fine so far. Just changed out the res and gave em some fresh nutes. It’s running @ 5.8 and 1040ppm. The pH is moving up .1 per day. I’m wondering if I need to supplement with something with anything else or if Cyco has it completely covered. Any comments appreciated.
Click to expand...
Nice bro I'm gonna try DIY me one of them cloners bro wish me luck lol
 
CurrentlyGreen

CurrentlyGreen

Member
Immastoner said:
Nice bro I'm gonna try DIY me one of them cloners bro wish me luck lol
Click to expand...

Hey thanks man!! Best of luck to you. I’m putting some pics up of it. It didn’t work right at first and then I found out you have to take everything apart and sterilize it. The first time I ran it I used clonex gel, clonex nutes, and Recharge microbes. Did horrible. 50% success rate. Disassembled, scrubbed with bleach and ran again with Cyco cyclone gel, clonex nutes, and no recharge and had 100% success in two weeks. And I found I had to keep water level all the way up to the bottom of the tube the sprayers are in to get enough pressure for them to work well. I have it on a cycle timer @ 45 seconds on an 5 minutes off. I don’t know if this is the best way to do this but it worked great for me. I’ve been told you have to disassemble and scrub everything out every time for good results. The whole project cost about a buck fifty. If you know of any improvements that may be made please let me know. I’m just learning. Oh and again, GOOD LUCK MAN!!
 

Attachments

Springtucky

Springtucky

Well-Known Member
Looks A-1 bro! Cycle timer though??? Why not just have it run constant? Ive always had great result with homemade cloners and store bought ones (even had the super big E Z Cloner like 5 years ago) and always ran them constant.
 
CurrentlyGreen

CurrentlyGreen

Member
Springtucky said:
Looks A-1 bro! Cycle timer though??? Why not just have it run constant? Ive always had great result with homemade cloners and store bought ones (even had the super big E Z Cloner like 5 years ago) and always ran them constant.
Click to expand...
Ok thank you! I can’t give a valid reason for the timer other than me meandering too far down google street. Next time I’ll try without it. I appreciate the feedback!
 
Lpena007

Lpena007

Well-Known Member
Yeah aero, I’m using Expert Gardener plant food. lol
Kinda experimenting with this one while my clones get roots, I’m sure I’ll still get some good bud out of it.
 
Immastoner

Immastoner

Well-Known Member
CurrentlyGreen said:
Hey thanks man!! Best of luck to you. I’m putting some pics up of it. It didn’t work right at first and then I found out you have to take everything apart and sterilize it. The first time I ran it I used clonex gel, clonex nutes, and Recharge microbes. Did horrible. 50% success rate. Disassembled, scrubbed with bleach and ran again with Cyco cyclone gel, clonex nutes, and no recharge and had 100% success in two weeks. And I found I had to keep water level all the way up to the bottom of the tube the sprayers are in to get enough pressure for them to work well. I have it on a cycle timer @ 45 seconds on an 5 minutes off. I don’t know if this is the best way to do this but it worked great for me. I’ve been told you have to disassemble and scrub everything out every time for good results. The whole project cost about a buck fifty. If you know of any improvements that may be made please let me know. I’m just learning. Oh and again, GOOD LUCK MAN!!
Click to expand...
Mean brutha
Yea will di I'd hope I can improve it lol
Probably not
 
CurrentlyGreen

CurrentlyGreen

Member
Here are pics @ 17 days. I wanna set up a screen but I have never used one before so we’ll have to just see how it goes. I can use all the help I can get so comments are much appreciated. Everything seems to be ok so far. I’m keeping [email protected], solids@1100, res temp@72f, tent temp@75f, humidity@60. I’m fighting the humidity right now. I I fear I need an a/c because the dehumidifier increases temp too much. No major fluctuations in anything. Ph rises about .1 per day. Any tips on when and how to set up screen would be nice. Also any advice regarding when to allow growth tips through in relation to switch to 12/12 and when to prune it. I had planned on vegging it a while longer with a screen, going 12/12, then after a week of transition let the tips through. Then after 3 weeks chop everything left beneath the net that hasn’t already been whacked.
 

Attachments

CurrentlyGreen

CurrentlyGreen

Member
48 day checkup. Ok I just want to start with ”I don’t know what I’m doing!” I repurposed an old golf net via bleach and scissors then just started trying to keep the tips pushed where I want them. i started bloom nutes 3 days before 12/12. I wonder why ph is dropping. Other than that, all seems to be well. any advice welcome.

VITALS
Temp 70-75f
Humidity 50-60%
Par 700-850
Solids 1450 ppm (700) approx.
pH 5.8 (drops about .4/day)
Res Temp 60-70f
Dissolved O2 11-14 ppm

DB665487-0D2F-4682-8A95-B2288F306508.jpeg94341CE3-A71E-428B-B738-E1F513CDFC7E.jpeg
 
You must log in or register to reply here.
Top