jrbritton
Member
So as the title says, this is my first indoor grow and my first post. I have been doing alot of research for the past five moths of so on this site and others. I finally just bought the stuff for my setup. I wanted to post my setup here on the forums to see if there is anything that I have missed or any tips or constructive Critisism out there.
I bought a 4×8 grow tent, 2 1000 watt cool tubes, 2 6 inch 460 cfm exhaust fans and all my ducting. I installed two 20 amp circuit breakers in my Electrical panel and ran 1 outlet off off each breaker. I am going to run one light off of each breaker and then split the rest of the electrical between the two breakers.

My two lights are cooled with one 6 inch 460 cfm variable speed inline fan. I am drawing air from outside the tent through the lights and back out the tent. My carbon filter is run off its own 460 cfm inline fan. Both fans will be vented outside.
This basement window is going to be removed and replaced with plywood. Then I am going to install two dryer vents and run ducting to my fans

I will be putting two oscillating fans in the tent also. Right now there seems to be alot of negative pressure inside the tent even with the fan on low. How much negative pressure is to much? The fan cooling the lights does Not create any negative pressure because it is drawing air from outside the tent.
So what do you guys think of this setup. Did I miss anything?
I bought a 4×8 grow tent, 2 1000 watt cool tubes, 2 6 inch 460 cfm exhaust fans and all my ducting. I installed two 20 amp circuit breakers in my Electrical panel and ran 1 outlet off off each breaker. I am going to run one light off of each breaker and then split the rest of the electrical between the two breakers.

My two lights are cooled with one 6 inch 460 cfm variable speed inline fan. I am drawing air from outside the tent through the lights and back out the tent. My carbon filter is run off its own 460 cfm inline fan. Both fans will be vented outside.

This basement window is going to be removed and replaced with plywood. Then I am going to install two dryer vents and run ducting to my fans

I will be putting two oscillating fans in the tent also. Right now there seems to be alot of negative pressure inside the tent even with the fan on low. How much negative pressure is to much? The fan cooling the lights does Not create any negative pressure because it is drawing air from outside the tent.
So what do you guys think of this setup. Did I miss anything?