Fluence SPYDR 2p+C02 BTU Questions

I will be setting up a 5 by 9 sealed grow tent. In this room, I'll have a 6inch Ac infinity fan hooked up to a carbon filter to reduce the smell. My main concern is temps in the tent. I will be running two SPYDR 2p Led lights and a 20 pound c02 tank. I know humidity and temperatures will be an issue because the heat in the tent can not be filtered from the outside due to too the c02. Now for the BTU will a 10,000 Btu portable AC be sufficient enough to cool the tent down or will I have to up the BTU so the AC doesn't have to work so hard. I will have multiple fans to cool the tent a little and move the air around of course. I will be running 32 GG#4 cuts in the tent only vegged out for 2.4-3weeks i don't know if strains environments vary the way I should set up this tent. Oh and of course I almost forgot the to mention this grow ill be in coco and the nutrients will be Jacks 3-2-1 full strength throughout the whole grow. Suggestions and feedbacks will be much appreciated even stuff that I haven't asked or covered.

Sealed means the a/c unit would need to be in the tent.
Unless you have figured out how to exhaust the heat from the a/c condenser, it won't work. Mini-split comes to mind
The two fixtures use 1262 watts. 1262x3.41 btu/w=4303btu of thermal load the fixtures will introduce into the grow space.