AntiMatter2102
Member
Hey guys, long time lurker here. Been reading heaps of guides and had really good results with soil grows in the past! First time growing in coco though, and i'm having a slight problem with the flowering.
I'll post pics below, but my main issue is tiny popcorn buds all around Even the main cola's aren't looking that dense, I was wondering what you guys think about my grow.
I'm about week 7 or 8 in the cycle and it's not looking like other grow journals do. Especially in coco!
(Note 1: Checked trichomes for ambering, nothing yet, if anything, just a few cludy/opaque trichs)
(Note 2: I had high EC levels at around 3.6, which were probably there for about a week or two; I've flushed them since with cannazym only, and started adding the coco nutes again, with a total EC of 1.3 higher than my tap water)
Set up is as follows:
1x 130W CFL (2700K)
1 x 60W CFL (6000K)
1 x 55W CFL (5000K)
The tallest plant is about 2 or 3 inches away from the 130W CFL, while the others are probably at at least 8 inches away.
Nutes all at this stage:
Canna Coco A + B: 3 mL each per litre
Canna Rhizotonic: 0.5 mL per litre
Canna PK 13/14: 2 mL per litre (stopped using after a week as directed)
Cannazym: 2.5 mL per litre
Temps are usually at 29 degrees celsius (or about 85 degrees Fahrenheit), I have a small fan running during the whole 12 hours of light.
Any advice would be awesome.
Now that i've flushed and got the EC levels back to normal again, can I expect them to pick up and fill out? Or is that it for them?
Thanks guys!
I'll post pics below, but my main issue is tiny popcorn buds all around Even the main cola's aren't looking that dense, I was wondering what you guys think about my grow.
I'm about week 7 or 8 in the cycle and it's not looking like other grow journals do. Especially in coco!
(Note 1: Checked trichomes for ambering, nothing yet, if anything, just a few cludy/opaque trichs)
(Note 2: I had high EC levels at around 3.6, which were probably there for about a week or two; I've flushed them since with cannazym only, and started adding the coco nutes again, with a total EC of 1.3 higher than my tap water)
Set up is as follows:
1x 130W CFL (2700K)
1 x 60W CFL (6000K)
1 x 55W CFL (5000K)
The tallest plant is about 2 or 3 inches away from the 130W CFL, while the others are probably at at least 8 inches away.
Nutes all at this stage:
Canna Coco A + B: 3 mL each per litre
Canna Rhizotonic: 0.5 mL per litre
Canna PK 13/14: 2 mL per litre (stopped using after a week as directed)
Cannazym: 2.5 mL per litre
Temps are usually at 29 degrees celsius (or about 85 degrees Fahrenheit), I have a small fan running during the whole 12 hours of light.
Any advice would be awesome.
Now that i've flushed and got the EC levels back to normal again, can I expect them to pick up and fill out? Or is that it for them?
Thanks guys!