Iso Hash Oil Yields?

newbie45

Well-Known Member
So I've been reading about the isopropyl alchohol extractions for hash oil and they seem easy so i might as well carry through with it.

Before i begin i would really like to know how much oil i will be getting from an ounce of mid grade and how much would i get from a ounce of nugget grade.

Any help would be appreciated
 

floridasucks

Well-Known Member
your much better off using acetone in place of alcohol. it leaves less residue and evaporates faster. its hard to say how much you will get from an ounce... i just did about a half oz of shake, trim, and stems and i got 5.7grams.

when i first learned how to make it i used alcohol. then i learned acetone is way better.




 

hogs

Member
Acetone will fry your head....



your much better off using acetone in place of alcohol. it leaves less residue and evaporates faster. its hard to say how much you will get from an ounce... i just did about a half oz of shake, trim, and stems and i got 5.7grams.

when i first learned how to make it i used alcohol. then i learned acetone is way better.




 

taint

Well-Known Member
Check the link in my sig for a safe way to properly do iso.
Acetone is very bad to use.
I average about 10% return on high quality material using a 160 screen.
Average goes up slightly using a 120 screen but as the yield goes up the quality goes down..................
 

weasels911

Well-Known Member
As long as the acetone dry evaporates and leaves no residue behind it is good to use.
That looks better than what I usually get with iso, will try acetone in the future.
 

tmf

Member
Best extraction method is with butane, I have done this, excellent results, minimum extract of 1gm oil per 1oz weed, super potent, thick and sticky. You can observe the process on 'you tube', search honey oil. Use culinary butane. Clean equipment with 180degree olive oil, save the olive oil and make brownies with it! Alcohol is not a good solvent for THC. Tetrahydrocannabinol is an oil and is most soluble in oils. Keep temperature under 200 degrees or your THC will vaporize. Honey oil is best handled, or transferred to small glass bottles when it is at a temperature of 34-40 degrees. ( temps mentioned here are F, not C)
 

Felix420allday

New Member
So I've been reading about the isopropyl alchohol extractions for hash oil and they seem easy so i might as well carry through with it.

Before i begin i would really like to know how much oil i will be getting from an ounce of mid grade and how much would i get from a ounce of nugget grade.

Any help would be appreciated
Easy yes just control environment.all from time u break it up to strain. Have room and not to much on go. I just had tiny spill from doing 4 thing instead of 3
 
Top