Made a 2 x 2 light.

My house is too cold, so instead of using a heater like normal person would. I made an extra light and added a small 2x2 tent

My wiring is getting better

10 BXEB-L0560Z-35E2000-C-B3
1 HLG 185 20B

View attachment DSC_2071 (2) - Copy.JPG


View attachment DSC_2077 (1) - Copy.JPG

View attachment DSC_2078 (1) - Copy.JPG

View attachment DSC_2081 (1) - Copy.JPG

View attachment DSC_2083 (1) - Copy.JPG

View attachment DSC_2087 (1) - Copy.JPGView attachment DSC_2083 (2) - Copy.JPG

Cheers
CCG

Looks good, but why are the two strips on one end of the fixture so much closer to each other than the rest?

I've made a few using the BXEB strips and square tubing as sinks too. Drilled some 10mm holes along the top to help heat escape, and the 2nd one I used threaded rod to hold it all together it's much stronger and makes it easy to hang with carabiners. I was in a rush so drilled and tapped a million holes to attach the strips to the tubes using screws and used thermal grease. Never doing that again I will happily wait for Amazon to deliver the thermal tape next time.

Good luck heating a house with it, might not want to completely trash the idea of getting a heater.

PJ Diaz said:

Looks good, but why are the two strips on one end of the fixture so much closer to each other than the rest?

Click to expand...

I'm not very good at measuring or metal work, lol
Cheers
CCG