Im in need of some help with my MH, building a DIY Projector and can not find anything on wiring this up except for ones that have up to 7 wires comming off the ballast but i only have 4. I know this setup works because it was wired up and working at one time, not sure of the brand but its a 70w ballast, 70/100 ignitor, socket and 70w bulb. The pink and blue wires coming from the ballast are over what i think is the short end ( has thinner gauge wire than the other side )
What i need is someone to say connect [ballast, color] wire to [socket, color] wire, etc....
What i need is someone to say connect [ballast, color] wire to [socket, color] wire, etc....
Last edited:
