R3dima
Active Member
​Ok here we go...Setup is a 14x12x7 only using half the room right now before using the other 24. I have 24 running on flood and drain system... I am running the feed for 30 minutes every 3 hours.have 4 1000watt only have 2 running over the 24. venting in 8inch and pulling out on a 10" can 1035cfm... have it set to a sentinel controller and when temp hits 76 F during the day the fan vents. Night time 70F before venting so uses co2 wisely...My question is am I feeding them too much...Too much heat? Nutrient burn? Using Botnicare Pro with some bloom enhancers. They did great in veg...when I transferred they didn't seem to take well and I am trying to dial in the room. At first the lights were too close and the heat was high. I moved the lights up and change the temp at plant level... I also do have a circulation fan doing some help with wind resistance of course but helping the heat issue... At night it gets cold so I put in a space heater for night time temp to stay at 70...It looks like heat issue at first but this is 2nd week in flower and they aren't really blooming. I thought it was a shock at first for the first week but the way they look now I am really weary of them...So can anyone please give some good advice... Any help really... But if I can get a pro on board please!!!!!Thanks Guys!!!
Attachments
-
72.1 KB Views: 13
-
59.8 KB Views: 13
-
59.3 KB Views: 12
-
57.9 KB Views: 11
-
48.5 KB Views: 9
-
59.1 KB Views: 7
-
51.2 KB Views: 4
-
54.3 KB Views: 13
-
49.2 KB Views: 2
-
44.7 KB Views: 3
-
69 KB Views: 1
-
40 KB Views: 1
-
76.2 KB Views: 7
-
75.6 KB Views: 3