My quick tent exhaust for the DIY,ers

naiveCon

Well-Known Member

• Sep 21, 2017

• #1

Here is my SDR 35 quick tent ventilation system. Had some SDR kicking around with a few fittings so I whipped this together.

Solid piece of SDR 35 for the vertical with a fernco cap at the bottom just to act as a vibration dampener in case.

Perforated SDR 35 off at a 30 degree angle to take excess heat out.

2 inch intake stuffed with steel wool as a dust filter.

4 inch inline fan can controled by an autopilot thermostat.

No need for smell control but an inline filter could easily be added...

 

QuantumNchill

Member

• Sep 22, 2017

• #2

Neat!

 

Nugachino

Well-Known Member

• Sep 22, 2017

• #3

That's one way to do it.

 

SensiPuff

Well-Known Member

• Nov 12, 2017

• #4

Does your tent compress when it's zipped up? I have bad issues pulling air thru my tents cause they shrink up as soon as you zip em up

 

naiveCon

Well-Known Member

• Nov 12, 2017

• #5

SensiPuff said:

Does your tent compress when it's zipped up? I have bad issues pulling air thru my tents cause they shrink up as soon as you zip em up

Click to expand...

It does suck in a little bit but nothing to be alarmed about.

Do you have a bottom intake on your tent ?

 

Lite

Well-Known Member

• Nov 12, 2017

• #6

i like the idea of pvc for this

 

naiveCon

Well-Known Member

• Nov 12, 2017

• #7

Lite said:

i like the idea of pvc for this

Click to expand...

It's just basic drainage pipe, SDR 35 that can be obtained pretty much anywhere.

Solid pipe for the vertical and drainage pipe to draw the heat out... in tent temperature stays perfectly to what I set my thermostat..