My rooms getting sucked dry?

Problem. If my intake or exhaist is on my humidifier is useless. I need to run my ventilation but my room wont get above 30 percent. Any suggestions?

5x5x5 room. Covered in mylar but not 100 percent sealed.. Sunbeam ultrasonic humidifier with adjustable humidistat.


What can i do?

Maybe use a stronger humidifier. I use a 9 gallon honeywell ,Ill put a link to the model. I dont what the cfm is on your exhaust fan but there are controllers you can buy to adjust the speed too.

http://www.honeywellcentral.com/product/honeywell-quietcare-hcm-6009-9-gallon-console-humidifier-with-air-washing-technology

Edited post below.

most plants dont even show simptoms of low humidity. I live in colorado we always have low humidity.

What are your room temps?
Where are you pulling your intake air from?
How many lights/watts are you running in that space?
Are you currently running a/c and if so how often throughout the day?

I had the same problem when running 2 1k's in Raptor Hood's in a 4x8 tent. Basically had to much light/heat in to small of a space in and I had to run my a/c constantly killing alot of humidity along with the excess heat killing it off as well. Even with a larger humidifier I still wasn't seeing above 30% humidity tops either.

Are your plants showing any deficiencies? Sometimes when your RH drops that low your plants will suffer from VPD and will trick you into thinking you have nute issues.

Here's a thread on VPD if you're not familiar with it: http://www.skunkskool.com/showthread.php/13424-Humidity-and-Vapor-Pressure-Deficit

No hoodTemp 80
600w
No ac
Intake frim room above


Anh other details in last oost of journal in my sig

you could get a hood and have intake from outside > hood > back out ?

I have 4 1000w next gen air cooled but i wanted a small run this time. Can i use my 600 bulb and ballast on one of thos