bigjuicytomatoes
Active Member
Here are the details: Plants are just over two weeks old under a 400W HPS light that is about 18-20" from the top of the plants. Temp stays around 72-28 and humidity for first two weeks was around 28% but after purchasing humidifier it has been at around 45-50%. Until last night I had been Ph'ing my nutrient solution to about 6.5-6.8, but I read here that it should be around 5.5-6.0 for hydro so I changed last night. Using Triflex Grow, Base & Bloom. First two weeks used what was recommended on the bottle for seedlings but after seeing symptoms I flushed and used water (still ph at around 6.5) for about three days (until last night). Last night used half strength recommended nutrients and ph'd my water to 5.4 and will let it drift up to around 6.0 before adjusting or changing nutrients. CO2 regulator was busted upon receiving it so I am still waiting for the replacement.
Here are the symptoms:
4 Skunk x NL & 1 Big Bud, symptoms pretty much only appearing on the Skunk x NL:
Another shot of a different 2 week old Skunk x NL with leaf edges curling upward.
2 week old Skunk x NL with small brown spots on leaves in addition to leaf edges curling upward.
Another shot of a 2 week old Skunk x NL with a few small brown spots on the leaves and leaves edges curling upward.
2 week old Big Bud in same conditions seems to be doing just fine.
My thoughts at first was that I used too much nutrients at first after reading that many people use no nutrients at all for the first few weeks. Then after reading that hydro PH should be lower I am thinking that it could be the opposite and was nutrient lockout due to the PH. Does anyone know what is going on with these plants? There were also some fluctuations in heat because my furnace has been on the fritz so in the beginning the room fluctuated between 65 and about 85. I am pretty sure it is not overwatering because of the Rockwool medium which is supposed to retain 18% oxygen at all times. Did I do the right thing by cutting nutrient solution to half the recommended level and adjusting my PH down to 5.4%? Please help!! It will be greatly appreciated.
Here are the symptoms:
4 Skunk x NL & 1 Big Bud, symptoms pretty much only appearing on the Skunk x NL:
- Fan leaves started to curl and twist a little bit as well as seeming to droop and slightly curl downward at the tips. No discoloration noticed.
- One fan leave actually tore and is currenty dying but the rest of the plant is still green.
- Leaves curling up around the edges and still kind of twisting - hard to describe
- A couple of small brown spots on the top of a couple of leaves on a few plants
Another shot of a different 2 week old Skunk x NL with leaf edges curling upward.
2 week old Skunk x NL with small brown spots on leaves in addition to leaf edges curling upward.
Another shot of a 2 week old Skunk x NL with a few small brown spots on the leaves and leaves edges curling upward.
2 week old Big Bud in same conditions seems to be doing just fine.
My thoughts at first was that I used too much nutrients at first after reading that many people use no nutrients at all for the first few weeks. Then after reading that hydro PH should be lower I am thinking that it could be the opposite and was nutrient lockout due to the PH. Does anyone know what is going on with these plants? There were also some fluctuations in heat because my furnace has been on the fritz so in the beginning the room fluctuated between 65 and about 85. I am pretty sure it is not overwatering because of the Rockwool medium which is supposed to retain 18% oxygen at all times. Did I do the right thing by cutting nutrient solution to half the recommended level and adjusting my PH down to 5.4%? Please help!! It will be greatly appreciated.