Next grow need some advice

HIGHNSOCAL

Active Member
SO I HAVE A 9X11X8 SIZE ROOM THAT I'M LOOIN TO START MY NEXT GROW IN GIVING but will only use 7x5x8 THINKIN OF RUNNING 2 1000W. HPS/MH AND GROWING 12 TO 14pLANTS. THINKING A 4INCH EXHANUST WITH CARBON FIL WILL BE ENOUGH ALSO LOOING ON GROWING TANGERINE DREAM AND SOME VIOLATOR KUSH ANYONE HAVE ANY EXPERIENCE WITH ANY OF THESE BUDS UR ADVICE IS MUCH APPRECIATED
 

Bluntcuts

Active Member
No need for all CAPS!!

Anyways, a 4" exhaust fan won't be near enough airflow to cool 2 1000w bulbs.

How many CFM is the 4" exhaust??
 

HIGHNSOCAL

Active Member
Its rated at 200cfm that would just be enough for fresh air. But now that I thin about it might as well go with the 6" its rated at 500cfm... would 2 1000w. Be good for that space or too much light for that room?
 

Bluntcuts

Active Member
Don't no much about 1000w's. But I think 2 600w would maybe do it. Not positive just trying to help. I would definately wait for someone else to post with a little more knowledge than I have.
 

Jack Harer

Well-Known Member
With a room that size, just keep good air exchange in the room, and get some fans blowing across the tops. I ran a minimum of 2 1K lights, most times 3, over a 4' x 8' table in a room that size. I ended up putting a 5K BTU window unit in the room. Get a carbon filter for the room exhaust. No need for air-cooled hoods.
 

MrMeanGreen

Active Member
IMHO you would be better with 3 x 600w than 2 x 1000w. Better light spread, cheaper to run (just) and suposedly more effective than 2 x 1000w. You will need cool tubes either way they both throw out alot of heat, unless you live in the arctic. Also 14 will be a tight squeeze if ya veggin to approx 2ft, 12 would be just doable.
 

HIGHNSOCAL

Active Member
i was thinkin of getting the 6" aircoolhoods with the 6"exhaust and carb fil..... will i need another 6" inline as well? has anyone had any experience with these strains?
 
Top