Keesje
Well-Known Member
A new device has recently been launched.
It is called the PerfectPH and comes from a company called TorusHydro.
They are also an advertiser now on rollitup and you can win one of their devices.
https://www.rollitup.org/t/win-a-perfectph-auto-ph-balancer-for-hydroponics.997587/
It is a device tha automaticcaly balances your pH in hydro.
This is how they claim it works:
HOW DOES IT WORK?
Using ion technology, the PerfectpH attracts and captures the charged particles that influence pH, targeting pH problems at their source and keeping pH in the ideal range for proper growth. PH is a measurement of charged-hydrogen concentration, and as this concentration changes growers then see spikes or drops in their pH value. What growers are actually witnessing is an excess of positive (H+) or negative (OH-) hydrogen ions building up, which then inhibit the plants from properly absorbing the nutrients they need. Without the PerfectpH, this then requires growers to keep constant attention to make sure that the pH is maintained in the proper range. The PerfectpH acts as an outlet for these ions, capturing ions that would otherwise raise or lower pH outside of the ideal range. Simply drop the PerfectpH capsule model into your reservoir or connect the PerfectpH Inline Edition to your pump, no power required.
Already in 2010 Dr. Daniel Fernandez wrote about something similair
https://scienceinhydroponics.com/2010/05/how-to-have-a-constant-ph-in-hydroponics-no-more-corrections-o.html
Basics are that certain weakly acidic cation Ion exchange resins make sure that your pH stays between 5.8 and 6.2.
The resins can be re-charged after a few months by cleaning them with some low percentage acids.
Does anyone have experience with the device PerfectPH?
Does anyone already use those resins?
Did anyone make the device himself with Amberlite CG50, for example?
It is called the PerfectPH and comes from a company called TorusHydro.
They are also an advertiser now on rollitup and you can win one of their devices.
https://www.rollitup.org/t/win-a-perfectph-auto-ph-balancer-for-hydroponics.997587/
It is a device tha automaticcaly balances your pH in hydro.
This is how they claim it works:
HOW DOES IT WORK?
Using ion technology, the PerfectpH attracts and captures the charged particles that influence pH, targeting pH problems at their source and keeping pH in the ideal range for proper growth. PH is a measurement of charged-hydrogen concentration, and as this concentration changes growers then see spikes or drops in their pH value. What growers are actually witnessing is an excess of positive (H+) or negative (OH-) hydrogen ions building up, which then inhibit the plants from properly absorbing the nutrients they need. Without the PerfectpH, this then requires growers to keep constant attention to make sure that the pH is maintained in the proper range. The PerfectpH acts as an outlet for these ions, capturing ions that would otherwise raise or lower pH outside of the ideal range. Simply drop the PerfectpH capsule model into your reservoir or connect the PerfectpH Inline Edition to your pump, no power required.
Already in 2010 Dr. Daniel Fernandez wrote about something similair
https://scienceinhydroponics.com/2010/05/how-to-have-a-constant-ph-in-hydroponics-no-more-corrections-o.html
Basics are that certain weakly acidic cation Ion exchange resins make sure that your pH stays between 5.8 and 6.2.
The resins can be re-charged after a few months by cleaning them with some low percentage acids.
Does anyone have experience with the device PerfectPH?
Does anyone already use those resins?
Did anyone make the device himself with Amberlite CG50, for example?
Last edited: