onthedl0008
Well-Known Member
Alright. I finally got enuff together that I felt I could start my PINK VAG SOG.
Ive got 2 moms currently being cut on. Which I will be rotating between shifts and growing new cuttings to clone from in the meantime.
Ive got 1- 18 gallon tub used primarily for cloning and root structure which I will be swapping the tops with my 2- 18 gallon tubs in flower rotation.
Set-up very simply. Each lid will contain 6 5 inch pots armed with 2-3, 5-7 inch cuttings which i will be placing directly into flower upon root structure growth.(AS soon as the roots hit the water).
I decided on typically 12 plants in one tub at all times in flower mode.Using awesome advice given by many growers but especially Old in the way, Bugs r n me as well as some help from Sparkafire.
Its true u really can grow 12 plants in a 3 foot square area using the 4 plants per sq.ft. method. And im going to do this in my tubs although the area of the plants wont be spread out evenly inside the square footage its still going to happen either way!
All my tubs will be armed with 2-econoplus eco air 2 commercial pumps and 2 -12 inch stones per pump dual output.
As well as a small submersible pump in each tub to 1 move the air and food supply over the roots and keep the food off the bottom of the tub. And 2 to make for simple,easy, effortless water changes by hooking up a piece of half inch tubing to be pumped directly into the nearest drain to my flower spot.
Lighting. Im vegging my moms with 2- 42 and 2 -23 watt daylight cfls. The halide was growing them way to hard and fast and the cfls are completely sufficient enuff to grow my moms out of control and keep my tub supplied with cuttings! Besides the fact that im growing and cloning all my veggies in about a 2.75 sq.ft area thats only 30 inches tall.
Flower mode. Ive decided to go with 2- 150 watt sunsystem HPS complete systems for each flower tub. WHY? Cuz they dont burn so hot.I can keep them closer to my tops. To gain a better watt per cubic ft. in the meantime. And I went with 2 because I want to keep that 100 watts per sq.ft. ratio.(tubs are a lil under 3 sq.ft.)
I want 300 grams per tub per harvest its that simple.
And I ghetto bullied my favorite salesman at the dro store for rediculous prices on these lights bwahahaha.
Ph= 5.4 - 5.8
Res temps= from 72-78 degrees
All organic botanicaire pro nuts. With some synthetic supplements such as Kool bloom and am looking @ other things for different stages as well.
Veggies dont need much really. Rarely does the ppm hit 600 in veg and realisticly i try to keep it around 400 if i can.
Flower nuts are starting 800 ppm but by the second week or first res change they will be kept at a constant 1400. And prolly top out at 1500 and back to 1400 in last stages of flower. I will be flushing later and keeping them eating longer as well as suggested by some people.
Anyways enjoy.
Ive got 2 moms currently being cut on. Which I will be rotating between shifts and growing new cuttings to clone from in the meantime.
Ive got 1- 18 gallon tub used primarily for cloning and root structure which I will be swapping the tops with my 2- 18 gallon tubs in flower rotation.
Set-up very simply. Each lid will contain 6 5 inch pots armed with 2-3, 5-7 inch cuttings which i will be placing directly into flower upon root structure growth.(AS soon as the roots hit the water).
I decided on typically 12 plants in one tub at all times in flower mode.Using awesome advice given by many growers but especially Old in the way, Bugs r n me as well as some help from Sparkafire.
Its true u really can grow 12 plants in a 3 foot square area using the 4 plants per sq.ft. method. And im going to do this in my tubs although the area of the plants wont be spread out evenly inside the square footage its still going to happen either way!
All my tubs will be armed with 2-econoplus eco air 2 commercial pumps and 2 -12 inch stones per pump dual output.
As well as a small submersible pump in each tub to 1 move the air and food supply over the roots and keep the food off the bottom of the tub. And 2 to make for simple,easy, effortless water changes by hooking up a piece of half inch tubing to be pumped directly into the nearest drain to my flower spot.
Lighting. Im vegging my moms with 2- 42 and 2 -23 watt daylight cfls. The halide was growing them way to hard and fast and the cfls are completely sufficient enuff to grow my moms out of control and keep my tub supplied with cuttings! Besides the fact that im growing and cloning all my veggies in about a 2.75 sq.ft area thats only 30 inches tall.
Flower mode. Ive decided to go with 2- 150 watt sunsystem HPS complete systems for each flower tub. WHY? Cuz they dont burn so hot.I can keep them closer to my tops. To gain a better watt per cubic ft. in the meantime. And I went with 2 because I want to keep that 100 watts per sq.ft. ratio.(tubs are a lil under 3 sq.ft.)
I want 300 grams per tub per harvest its that simple.
And I ghetto bullied my favorite salesman at the dro store for rediculous prices on these lights bwahahaha.
Ph= 5.4 - 5.8
Res temps= from 72-78 degrees
All organic botanicaire pro nuts. With some synthetic supplements such as Kool bloom and am looking @ other things for different stages as well.
Veggies dont need much really. Rarely does the ppm hit 600 in veg and realisticly i try to keep it around 400 if i can.
Flower nuts are starting 800 ppm but by the second week or first res change they will be kept at a constant 1400. And prolly top out at 1500 and back to 1400 in last stages of flower. I will be flushing later and keeping them eating longer as well as suggested by some people.
Anyways enjoy.
lol yea i saw it then replied, then deleted my post after haha, i was wtf, its all good tho 
LMAO man smoking a blunt to that. That shit is funny man.