Has anyone ever used the Monarch plastic nozzles? - https://www.monarchmfgworks.com/monarch-nozzles/spray-and-water-nozzles/plastic-nozzles-m1-m22/ check out those individual screen filters!
I've located a couple different distributors for these @ around $1.50 each, and I'm looking to give them a try. They rate them down to 30 psi, but I'm planning to use about 40 nozzles in my next project, so I'll probably move to a SHURflo pump (8000 series) to up my pressure to somewhere between 40-100 psi. Let's get real... I can purchase one of those on ebay (<$150) for less than the biggest mag-drive at the hydro shop that MIGHT have a chance of pushing that many nozzles.
I've located a couple different distributors for these @ around $1.50 each, and I'm looking to give them a try. They rate them down to 30 psi, but I'm planning to use about 40 nozzles in my next project, so I'll probably move to a SHURflo pump (8000 series) to up my pressure to somewhere between 40-100 psi. Let's get real... I can purchase one of those on ebay (<$150) for less than the biggest mag-drive at the hydro shop that MIGHT have a chance of pushing that many nozzles.