budduhball
Active Member
I know you can press it but can you turn it into wax?
or Oil? Is it possible? Any good processes for that?
or Oil? Is it possible? Any good processes for that?
Turning Keif Into Wax?
- Thread starter budduhball
- Start date
washedmothafuka
Well-Known Member
Mix it with your buds and blast it with butane. Or make Qwiso.
oHsiN666
Well-Known Member
i sieved some leafs from some less then perfect leafs. the trichs were nice, but the leafs got all fucked up due to issues im having. anyways. the kief that i produced was gnarly!! its hella sticky. when you roll it in your fingers it turns to hash, and it melts like some "clear dome melt". it bubbles up and gets all crusty looking, but its still gooey!! i personally love its constancy. i do not know if its in the trichromes or what it is? but my last batch of keif i made was nothing like this. it was just normal keif. if i can get some pics ill see about posting them up.
budduhball
Active Member
Cool. Thanks.
budduhball
Active Member
toooo turned on by the oils and such Ive seen on here. I figured if I separated the powder and mixed it with clippings I could use a smaller tube and less butane.
washedmothafuka
Well-Known Member
Lol you don't even know how to wrap your own ti...
Edit: It would be a cool site if it had some good information on it. Maybe I can make something like that.
Edit: It would be a cool site if it had some good information on it. Maybe I can make something like that.
pure.shifter
Member
Heres the information you want. Its called "Cannabis Rosin" (well thats what the origianl poster calls it)
http://www.icmag.com/ic/showthread.php?t=21325
http://www.icmag.com/ic/showthread.php?t=21325
Fadedawg
Well-Known Member
You can soak the kif in butane using a thermos, or use alcohol to extract the oil. Don't worry about long soak times, most of the chlorophyll and water solubles have already been removed from the equasion.
After it is extracted, you can treat it like any other oil when it comes to subsequent processing into shatter or wax.
After it is extracted, you can treat it like any other oil when it comes to subsequent processing into shatter or wax.
[video=youtube;fAeydAb9BWI]https://www.youtube.com/watch?v=fAeydAb9BWI[/video]
Here is my most recent run (again made using nothing but Kief and RO water).
Tastes and smokes incredibly.
The consistency is that of the thinnest pencil shavings, but instead of being dry it's sticky like melted chocolate.
The terpenes were preserved and can be seen on the dish before the scrape.
Here is my most recent run (again made using nothing but Kief and RO water).
Tastes and smokes incredibly.
The consistency is that of the thinnest pencil shavings, but instead of being dry it's sticky like melted chocolate.
The terpenes were preserved and can be seen on the dish before the scrape.
I dont have any BHO equipment and I am trying to avoid the expense of purchasing it, while simultaneously finding a more natural method to come up with a similar result.
Fadedawg
Well-Known Member
Can you do a 190 proof ethanol extract?
I could. But then I wouldn't be working towards my goal of discovering the best method for coming up with an oil/wax final result from kief.
Solvent less full melt is the goal.
Fadedawg
Well-Known Member
My bad, I didn't notice that requirement in your question.
Define full melt? All kif has components that don't melt, so you would have to rid yourself of those to truly be full melt. Besides the stalks, even the heads have an inert disc, so Full Melt bubble, really means very little solids left behind.
If you are looking for Full Melt Bubble ("mostly" full melt concentrate), you might check out Bubbleman's and Matt Rizes sites, where that is their specialty and they do a fine job.
If not a solvent, you might consider heat.
Rosin extraction works well, but is slow and the yield low.
Vaporizing it and re-condensing it would give you a decarboxylated full melt concentrate.
Dry steam works well for the mono and sesquiterpenes, but is a stretch for the heavier diterpene cannabinoids.
No problem, I appreciate your constructive post now that you understand! You bring up a lot of good points. I guess to put it better, I am looking to produce the most melty and potent hash without using a solvent. Yield is not too much of a concern as with the method used, I am able to reclaim 100% of the material.
I've tried rosin, but didn't get too good of a result with my attempts. I have been using a beat and heat process to break the trichs and cook off the excess water, but with low enough temps that the terpenes are preserved.
If you have any ideas on how to improve the method, please by all means try it out and post the results.
[video=youtube;H2-sSKU781I]https://www.youtube.com/watch?v=H2-sSKU781I[/video]
EzExtractions
Active Member
can u dab the GOB? like on a hot titanium nail>
