Two ways for a DIY air cloner. [3D print] very cheap and worth. [photos inside]

Hello fellas. I have two air cloner system which I want to share with you all!

First the photos:

This is the first. It´s powered by a 2 Watt air compresor. You can buy one of then for around 5-10 $ in any pet shop



Its very cheap. Only 3 grams of PLA. The most common print material.

You need too these kind of acuarium sucker to place the mister on the bottom of the bucket



If you want a base in the bottom of the cannon you can choose this design too:
(you can attach 2 or more suckers too)



For the top part, you can buy the classic neoprene collars. But I have design these collars for a 38mm holes.



You can download the design from here: https://www.thingiverse.com/thing:4883481
You can download the collars from here: https://www.thingiverse.com/thing:4883506


The next air cloner is powered by a water pump instead the air compressor.

The original desing was made by a guy from thingiverse so I only do a little modifications for my own purposes.



powered by a little water pump







I have a little bit bucket and do no leak. I have no photo, sorry.

I like to 3D print for my grow hobby, it's my two favorite hobbies combined. Respect for using openscad

I made this thread a while back: https://rollitup.org/t/who-has-3d-printed-things-for-your-weed-hobby-include-links-to-things-if-possible.1043836/

anexgrower said:

I like to 3D print for my grow hobby, it's my two favorite hobbies combined. Respect for using openscad

I made this thread a while back: https://rollitup.org/t/who-has-3d-printed-things-for-your-weed-hobby-include-links-to-things-if-possible.1043836/

Click to expand...

thank you very much!

See this little mint. Only 5 days in the bucket! and more than 33ºC (91F) all days.