Unexpected Father. Please Help!

jmiller786

Active Member
Hi Guys,

So here's the deal. My boy called me up one day and asked me if I wanted some plants. He gave me two hindu kush females roughly 1.5 months into vegetation. They had some yellowing going on with some of the leaves. I clipped some of the leaves off and now they look pretty healthy. They're even starting to bud now.

Now, let me state that this is my first project since I was sixteen or so and none of those were successful. I want to see these through to completion this time. It kinda cought me offgaurd and I didn't have time to properly set up or anything. I started off by putting the plants in the window. That was the best I could do at the time. I now have them in a 2x2 space allocated in my closet. Everybody recommends I get a 400 - 600 Watt lighting system. I dont have the funds for that right now so i've improvised with a budget lighting system of my own in the meantime.

Lighting
Basically all I have for lighting is 1 - 45w flourescant Daylight (6500K) bulb thats equivalent to 90W and emits roughly 1000 Lumens. I just added another 42W Soft White equivalent to 150W (2800K) bulb that emits 2700 Lumens. That gives me roughly 3700 Lumens. Everywhere I read it says I need like 10,000 Lumens to flower. Is that required for two small two month old plants in a 2x2 space? They've already started flowering on me so I gotta see em through anyway. I want to add one more light, a 42W Soft White like the other one. That should equal up to 5400 Lumens and almost 400 Watts. Can I complete this process with this setup? I understand I won't get the best results, and I understand its not equivalent to a real light setup, but will it flower these plants?

I'm new to the site and I really like it here so far. Any help and advice will be greatly appreciated.

Thanks
 

korvette1977

Well-Known Member
Get all the CFL's you can with different spectrums in there , run a fan , and lights on for 12 hrs and off for 12 hrs
 

mockingbird131313

Well-Known Member
It is pretty simple really. Have some CFLs above. Those big temp work lights with 10 inch bowls are great. They cost about $15 at Lowes. Next, take a piece of wood and screw a 4X4 electrical box to it. Add a porcelin lamp base. Put a large CFL in it. Set this thing on your pots, midway between the two plants. The plants will grow toward the light a capture the bulb. A few leaves will be damaged, but don't worry. The plants will grow just close enough to use all the side light. With the top light you will be in great shape.
 
Top