Voidling
Well-Known Member
So I built this cab last year and slowly adding and subtracting from it since.
The first three photos show how I used half lap to make the frame
Shows how I glued up the frame
Inside mother cab in current condition
On the bottom is my grow cabs. On the left is for flower and is 28inx17in and 30 in tall. The right is for mothers/clones/veg and is 20"x17" and 30in tall.
The flower side was intended to run 6 to 8 55w pl-l lamps vertically. The mother side is running two 23 watt and two 26w cfl bulbs at the moment.
Still setting up proper ventilation and odor control. Currently only the smaller side is running and it has a 120mm pc fan being powered by a 5v 0.7a wallwart. I'm currently running this fan http://www.thermaltakeusa.com/Product.aspx?C=1164&ID=1729#Tab1 , it lists max pressure but not static pressure. I'm hoping that it'll be able to push through carbon filter, I've still got to figure out how I'm going to make a filter for it. With how I mounted it, I'm afraid I'm kind of limited on how to add a filter. I also have one fan circulating air within the cab over the cfl.
4 bagseed under the cfl on the mom side giving it a test. After some early problems I think they're finally doing quite well.
P.S. This was started to be a stealth cab but has been quickly losing stealth status due to some stupid design problems I made Now it is semi stealth, means that it is fine as long as no one looks behind it or opens the door. I can put locks on to it but not sure how to explain that.
The first three photos show how I used half lap to make the frame
Shows how I glued up the frame
Inside mother cab in current condition
On the bottom is my grow cabs. On the left is for flower and is 28inx17in and 30 in tall. The right is for mothers/clones/veg and is 20"x17" and 30in tall.
The flower side was intended to run 6 to 8 55w pl-l lamps vertically. The mother side is running two 23 watt and two 26w cfl bulbs at the moment.
Still setting up proper ventilation and odor control. Currently only the smaller side is running and it has a 120mm pc fan being powered by a 5v 0.7a wallwart. I'm currently running this fan http://www.thermaltakeusa.com/Product.aspx?C=1164&ID=1729#Tab1 , it lists max pressure but not static pressure. I'm hoping that it'll be able to push through carbon filter, I've still got to figure out how I'm going to make a filter for it. With how I mounted it, I'm afraid I'm kind of limited on how to add a filter. I also have one fan circulating air within the cab over the cfl.
4 bagseed under the cfl on the mom side giving it a test. After some early problems I think they're finally doing quite well.
P.S. This was started to be a stealth cab but has been quickly losing stealth status due to some stupid design problems I made Now it is semi stealth, means that it is fine as long as no one looks behind it or opens the door. I can put locks on to it but not sure how to explain that.