White mold cliff

Put it down or try saving it?

  • Salvage the top

    Votes: 0 0.0%

  • Come on 7, big bucks no whammies

    Votes: 1 50.0%

  • Burn it all down

    Votes: 1 50.0%
  • Total voters
    2
D

Dirtyroad420

New Member
So I finally flipped my 1st mimosa x orange mother plant after 5 months and a lot of cloning practice. The buds have me drooling with a few weeks to go. Caught the white mold early on the lower part and have been trimming and trying to get rid of it the past 2 weeks. Its been slowly working up the plant and is close to the top. Looking back, I needed to thin out more than every month. I let it get to bushy and now the bottoms gone and the middle is a few beers from hanging. Spaying fungicide since I saw it on everything, slowing it at best. Can I dry the air to kill it? Will the visually uneffected colas mold during/after drying and curing? Would you salvage now or chance it & push closer to the end of the month? Sorry so long, my first post and feel like I left to much out.
 

Attachments

  • 65BE3A25-9C0F-4183-86F7-A96F888E92ED.jpeg
    65BE3A25-9C0F-4183-86F7-A96F888E92ED.jpeg
    3.1 MB · Views: 30
  • D5F7D2A6-AA75-4A20-8E9D-4EE4AFC4C2F6.jpeg
    D5F7D2A6-AA75-4A20-8E9D-4EE4AFC4C2F6.jpeg
    1.7 MB · Views: 31
  • BD154090-EF19-465C-AF35-AE564512D470.jpeg
    BD154090-EF19-465C-AF35-AE564512D470.jpeg
    3.5 MB · Views: 31
  • 4A1CD39E-D44C-4328-9ACA-0F7AE14509B5.jpeg
    4A1CD39E-D44C-4328-9ACA-0F7AE14509B5.jpeg
    1.6 MB · Views: 31
  • A7FFE791-B5DF-4DF2-BC39-44194A11B003.jpeg
    A7FFE791-B5DF-4DF2-BC39-44194A11B003.jpeg
    2.3 MB · Views: 27
Are you meaning powdery mildew ? Or bud rot..
Ive never heard either called white mold..
If its PM move the plant outside and spray with milk mixed with 8x's water and pray it. Youll need to rinse the plant after a day and repeat. Then rinse again.. then rinse again. Making sure no milk stays in the buds..
Bud rot is a whole nutha can of worms..
Ive used proxide on it to slow it.. proxide also works to treat PM..
Stay away from chemical fungicides..
Citric acid is another treatment you can use on molds.. and is very safe during flowering..
 
Billy the Mountain said:
If you're correct and mold has started from the bottom and progressed nearly to the top now, what is there to salvage?

Are you certain it's mold? I don't see anything obvious in the pics.
Click to expand...

ya I’m certain. Bet i cut 1000 fan leaves the past 2 weeks. Near the buds not so certain in some spots and the furthest up for sure has another 8” to the colas. Better air flow. Thinking 2oz premi buds if i cut now or keep fighting for more
 
If you remove rot and keep good air flow during dry and get them dry in like 7 days they shouldn't rot more. Find your source. My portable ac had the white mold that turns into budrot on the fan wheel... bet that plant was right by the air intake into your tent getting all the mold pulled right onto it

Edit it does look like pm not rot
 
farmerfischer said:
Are you meaning powdery mildew ? Or bud rot..
Ive never heard either called white mold..
If its PM move the plant outside and spray with milk mixed with 8x's water and pray it. Youll need to rinse the plant after a day and repeat. Then rinse again.. then rinse again. Making sure no milk stays in the buds..
Bud rot is a whole nutha can of worms..
Ive used proxide on it to slow it.. proxide also works to treat PM..
Stay away from chemical fungicides..
Citric acid is another treatment you can use on molds.. and is very safe during flowering..
Click to expand...
Ya the stuff that looks like fuzz. I’ve been spaying growers ally on it almost daily for past few days. Humidity 50 temp mid 70s. Attic is probably 20 and 90. So wet outside lately
 
ProPheT 216 said:
If you remove rot and keep good air flow during dry and get them dry in like 7 days they shouldn't rot more. Find your source. My portable ac had the white mold that turns into budrot on the fan wheel... bet that plant was right by the air intake into your tent getting all the mold pulled right onto it

Edit it does look like pm not rot
Click to expand...
I did have ac in there for a few days during heat wave. I did spray it but not nearly enough after trying to learn how to dodge this bullet
 
If it looks like fuzz not baby powder it's rot. Watch for purple stems leading to colas, those will be full of rot
 
Yeah that is powdery mildew. You'll never safely get rid of it at this point. If anything you could wash it. Personally, I'd chuck it.

If you are going to grow in that area again you have some work to do.

 
manfredo said:
Yeah that is powdery mildew. You'll never safely get rid of it at this point. If anything you could wash it. Personally, I'd chuck it.

If you are going to grow in that area again you have some work to do.

Click to expand...
Nothing wrong with making edibles from PM weed.
 
farmerfischer said:
My thoughts too.. but i would like to see more pics of the plant that are affected to conferm 100%
Click to expand...
On fan leaves no doubt. Now im not sure near buds.
 

Attachments

  • A1F51D0B-1D5B-4C4C-9C4D-A63F8B613FCA.jpeg
    A1F51D0B-1D5B-4C4C-9C4D-A63F8B613FCA.jpeg
    1.8 MB · Views: 16
  • FA922FBC-1D01-4F29-89A8-26B5B4A1EED2.jpeg
    FA922FBC-1D01-4F29-89A8-26B5B4A1EED2.jpeg
    1.6 MB · Views: 16
  • 80796822-9148-43FF-964A-4633776297E7.jpeg
    80796822-9148-43FF-964A-4633776297E7.jpeg
    2.8 MB · Views: 17
  • 3A15013C-6857-46B8-84E2-BC4A8A68DA05.jpeg
    3A15013C-6857-46B8-84E2-BC4A8A68DA05.jpeg
    916.9 KB · Views: 15
Yup.. sorry bro .. pm.. youve been removing leaves for 2 weeks..? And when i did you spray fungicide and what was it? Just curious..
The reason i suggested proxide is because it can kill almost all spores..
You'll to treat your plant with something to slow the spred or even get rid of it.. you'll also during that time need to super douche your grow area..
 
farmerfischer said:
Yup.. sorry bro .. pm.. youve been removing leaves for 2 weeks..? And when i did you spray fungicide and what was it? Just curious..
The reason i suggested proxide is because it can kill almost all spores..
You'll to treat your plant with something to slow the spred or even get rid of it.. you'll also during that time need to super douche your grow area..
Click to expand...
8/17 1st saw it and cut infected fans and thinned it out a lot and did it yesterday spraying this before and after. Running out of things to cut. Buds aren’t ready time wise but but I could get and oz or 2 now. Was thinking 6sh at the flip.
 

Attachments

  • 5301EC9B-0D09-4E97-A42B-BBB99C26A8D5.jpeg
    5301EC9B-0D09-4E97-A42B-BBB99C26A8D5.jpeg
    1.8 MB · Views: 8
  • A1C47FD9-F21C-45AD-943E-E7844865E2B7.jpeg
    A1C47FD9-F21C-45AD-943E-E7844865E2B7.jpeg
    1.6 MB · Views: 7
  • 5B92E96F-F181-4E87-84BF-AF3D2B7E843D.jpeg
    5B92E96F-F181-4E87-84BF-AF3D2B7E843D.jpeg
    916.9 KB · Views: 6
  • 9DA54CC2-718D-49F5-9721-2D584537D75A.jpeg
    9DA54CC2-718D-49F5-9721-2D584537D75A.jpeg
    2.8 MB · Views: 10
  • 79F28A74-AB27-4A33-8E31-DBE3C52BADE8.jpeg
    79F28A74-AB27-4A33-8E31-DBE3C52BADE8.jpeg
    1.7 MB · Views: 11
farmerfischer said:
Cool you used citric acid..
All i can say is keep spraying and keep cleaning your growing area.. dont pull no more leaves..
It will take time but the spray should work..
Click to expand...
What should I do with any new areas i see? Spray or remove? I wanna run some more fans but feel like its a bad idea. Thanks for the help
 
Dirtyroad420 said:
What should I do with any new areas i see? Spray or remove? I wanna run some more fans but feel like its a bad idea. Thanks for the help
Click to expand...
Keep spraying affected areas(the mold spots)and the whole plant.. dont remove the leaves.. if that powdery stuff thats there bothers you, just wipe it off with a treated cloth or paper towel.. keep in mind this will wipe off the trichs in them areas but its that or mold spot.. youll have to rinse the plant heavily to wash off the dead mold .. then repeat the spraying to get the rest of the mold.. when alls said and done, and when its time to harvest, you'll have to wash your buds in proxide water then rinse buds in clean water before drying..
 
If you are going to grow in that area again, you might want to use Regalia. I went through 2 grows that got infected with pm and that was after a major cleaning including use of an ozone machine. Nothing worked til I used the Regalia, and now it is part of my IPM....and 2 years later, no signs of pm. And I use their Venerate for bugs.




Dirtyroad420 said:
What should I do with any new areas i see? Spray or remove? I wanna run some more fans but feel like its a bad idea. Thanks for the help
Click to expand...

Just spray....fans are a bad idea but won't matter at this point as those spores are all through your home or wherever you grow.
 
You must log in or register to reply here.
Back
Top