Will A Single 600w hps suitiable For A DR 150 tent ?

trichomedome

Active Member
Hi folks i only use a 600w lamp and my tent is 1.5 m3, i,m doing a scrog just now i,m wondering should i train the plants to 1.2/1.3 mtr or fill the whole screen, i,m using a para reflector it give,s a far better light cover ? Here,s a photo of the light set up. thanks TCD
 

NnthStTrls

Well-Known Member
You should be fine. You could make your grow space a tiny bit smaller by making a Mylar false wall but you really don't NEED to. If you are growing for personal only, you'll yield plenty. If you are really looking for a monster yield then maybe going to 2 400 watt hps would suit you better. Nice looking setup. Very clean. :peace:
 

KushisSweet

Active Member
Hello :), first off nice set up I like it a lot. For when to flip to 12/12, with how your plants sit underneath, train each top torward the outer edge, your nodes will then grow along and fill up those squares as you train the tops (you want nodes to grow up to the screen while you train te top down, then you can start training each node to a square). Flip when you have about 5" left in the screen IMO with soil. Also your reflector is perfect you will see exellent results with a healthy successful grow. Also, forget the two 400s! If you do decide to upgrade buy another 600w and go SOGand never go back!

Also I have a suggestion about those cables and power strip, you might want to tape them to a wall or a leg on your screen just to be on the safe side. Good luck.
 

trichomedome

Active Member
You should be fine. You could make your grow space a tiny bit smaller by making a Mylar false wall but you really don't NEED to. If you are growing for personal only, you'll yield plenty. If you are really looking for a monster yield then maybe going to 2 400 watt hps would suit you better. Nice looking setup. Very clean. :peace:
If you look at the right side there is a mylar sheet hanging x2 so i can alter the space ;) Also guys this is a more recent photo, it,s started 12/12 yesterday. thanks folks TCD


thanks
 

deza

Active Member
nice i never undestood how to get scrog working... i mean u just put up a scrog screen and let it do its thing?
 

Doer

Well-Known Member
I think what you do is train it under the screen till branches get long enough to push it up into a space available above the screen. One plant can cover quite a bit of sq footage that way. When you get it all vegged across and then up thru the screen, then it's on to flower.

Looks like he is training runners to go out under the screen and the nodes will push up cola. In some states, like CO, the number of plants owned at one time if very strict. So, Scrog takes longer than my "clones straight to flower and HPS only" but you can get big yields on fewer plants.
 

deza

Active Member
I think what you do is train it under the screen till branches get long enough to push it up into a space available above the screen. One plant can cover quite a bit of sq footage that way. When you get it all vegged across and then up thru the screen, then it's on to flower.
nice so this is to create an even canopy for the light to spread across all the tops evenly right? and yeild increase maybe?
 

trichomedome

Active Member
nice i never undestood how to get scrog working... i mean u just put up a scrog screen and let it do its thing?
yes deza basicly, then just keep tucking the new taller growth under, The idea is like you said an evenly lit canopy. Then use pea netting to suport the colas as they grow. I tied mine at aprox 1 month old, then let them grow as a bush then done this before putting the screen over it. Thanks for the positive coments folks. TCD
 

deza

Active Member
whatabout the main stem do you let that grow throug the screen? or bend thataround too?
 

trichomedome

Active Member
whatabout the main stem do you let that grow throug the screen? or bend thataround too?
With it being tied over for 6 weeks before now the main stem is only 6 inches tall then it,s just branches. In the 2nd photo i,ve bent them to 90 deg before puting the screen over. If you look at the plant with the thermo on it you can see the mainstem bending away. TCD
 

trichomedome

Active Member
Nice i like that system and setup.. Def going to consider this on my next grow
What i can say is that they reflectors/hoods are awesome bits of kit, i maybe wrong but i don,t think there popular in the usa ? There 1 mtr wide and the bulb sits vertical so all the bulb area is facing the plants, "not like the normal horizontal, half the bulb facing the plants and the other half having to be reflected" giving you unmatched intensity over the entite surface of the canopy. "Backed up with a light meter" If you,re using a normal hood, it,s worth the £ you gain it back 1st crop. That is the best piece of kit i,ve bought in 12 years, hence having one for veg and one for flower. oh and there also available in white. atb TCD
Here,s a photo taken yesterday, bear in mind the screen is 1.5 mtr :)
 

Doer

Well-Known Member
Never tired an umbrella reflector. I run a Mangum reflector made for Fresca Sol horizontal, but I can put the light much closer due to water cooling. (a significant plumbing effort)

It's interesting that it covers completely, a 3x4 bucket grow. I thought I's see a lot of leaning in from the corners. But, no, the corner girls are quite happy to face up into the corner. Then must be getting plenty of the 1000w. It's a pebble pattern of various size and shaped dimples on the aluminum hood. Works quite well. I covered the tops of the black buckets with white plasitc. Even more lux on the meter.
 

trichomedome

Active Member
Never tired an umbrella reflector. I run a Mangum reflector made for Fresca Sol horizontal, but I can put the light much closer due to water cooling. (a significant plumbing effort)

It's interesting that it covers completely, a 3x4 bucket grow. I thought I's see a lot of leaning in from the corners. But, no, the corner girls are quite happy to face up into the corner. Then must be getting plenty of the 1000w. It's a pebble pattern of various size and shaped dimples on the aluminum hood. Works quite well. I covered the tops of the black buckets with white plasitc. Even more lux on the meter.
I thought i was the only crazy dude ? :) i,ve tried telling peeps of the benifits of more light, no salt build up on top, less r.h problems namely after feeding and the lesser chance of soil,coco pests making it home. All for a £1 worth of panda plastic. ??? TCD "I had a look at the magnum hood imo there not in the same legue as a para"
 

roofwayne

Well-Known Member
With that hood it is like a vertical grow. I can see the advantages right off. You said you got 12 years ago, they still make them and would you know where to get one? thank you ...rw
 

deza

Active Member
Yeah man crazy hood.. I would get one but i need cooltubes to maintain temps.. because i have such a small space.. otherwise i would. Cant wajto see these babies bloom :)
 

Doer

Well-Known Member
Yeah, it probably is a better physics for the light ray paths and I see it is also the pebbled Alu. Can you get those for 1000w? How does it cool?
 
Top