Welcome to my grow journal, I first heard about high pressure aeroponics (HPA) or true aeroponics (TP) about a decade ago at a forum, it was like some mythical rocket science, sounded too true to be real.
So few years past and took the liberty and to try it out, more of a research or "learning...
Hi everyone!
I believe there's no better place for posting some questions regarding general cannabis growth.
After searching a bit more about aeroponic, and saw this old thread: Harvest a Pound Every Three Weeks!
I would like to invest in my first small aeroponic setup.
I've never been growing...
Any growers with experience using the tefen 1gph misting nozzles?
Would like to find out your experience how many nozzles you were running at what pressure and timings?
I've made a new setup myself. My pressure is between 60-90psi and im just testing with one nozzle per 68L/18Gal totes as the...
Same deal, only thing that changed is I “upgraded” (more of a side-grade) to cdp 8852 and I have a 1/2” pickup that splits to 3/8” pump input. All my plumbing push connect fittings and tubing are atp or John guest.
4x4
560w Cree cxb3590 3500k
44 gal res
High pressure aeroponics
Greenleaf Mega...
Week 1 12/12
All cannaventure Las Vegas triangle kush, six plants.
4x4 scrog
560w Cree cxb3590 3500k
44 gal res
High pressure aeroponics
Greenleaf Mega crop @ 1.6EC all the way through first set of leaves to harvest
0.6ml/gal Mammoth p at change
50ml Emerald harvest cal mag at change if...
After about a year of trial and error (And spending a small fortune), it looks like its finally going to work. A High-pressure Areoponic system that won't clog in the Australian Outback climate. However, the Water pump and Solenoid valve still need their own sound-proof boxes. Something which...
Creating nutrient profiles has intrinsic limitations and fall backs. Nutrient ratios need to be balanced. This enables a plant to absorb and incorporate elemental necessities. Because the ratios need to be balanced, increased concentrations of salts are required to meet plant nutrition...
What's up? This is a continuation of my first grow journal, but enough has changed that I should start a new thread.
My setup currently:
two separate HPA loops, recirculating 80-100psi, accumulators, aquatec 8800's, a solenoid on every bucket. Each bucket has three 3/4gph misters, and a...
Anyone ever seen this (see picture) it started this morning. This is a ninja fruit. Not quite sure what's wrong with it. I am having low humidity 36%-40% and 80°-85° temps. Full hpa system. Veg bloom nutes with extra cal mag+ silica and enzymes. pH between 5.8 to 6.0, ec 1.7- 2.0 Citizen clu048...
I've been building out a new grow setup this summer using high pressure aero / DWC hybrid under COB LED lighting. All flowering will be done using portable SCROG modules that can be disconnected in seconds and wheeled around like carts. Central res is auto topped up with RO water via float...
I haven't really found a lot of information on this subject. The basic premise I have gotten is as follows...
- 80-100 PSI pump
- around a 40 micron droplet from some kind of misters
- run pump from 5 seconds to 2 minutes every 4 to 15 minutes
- Pre-Pressurize Accumulator Tank
-...
This will be my first grow journal. I have all the parts I need to build a high pressure aeroponics indoor garden.
It will consist of at least 24 plants (not including seedlings/clones) in two 4x4 tents and a 24 site aeroponic cloner (LPA).
I will be using 20 (10 per tent) cxb3590 CD bin...
Hi ladies/gentlemen
I've been lurking for a while, and never posted.
I'll start by saying that I've got some hydro(dwc, nft, fog)/soil experience and I know what to look for in general plant health. But I've got no MJ experience at all. My wife just got her MMJ license and I'm looking to do...
I'm new here and to the forum scene in general. Hopefully I won't goof it up too bad. I just built a 2' x 10' x 6" deep grow table.
Almost finished. Still working on fine tuning the Bell siphon for the ebb and flow function should I go that route. Or I can use the internal stand pipe only by...