Anyone tried Dutch Passion HighLite LED 006

[Sandgrouper]

Looking at going for a LED for a scrog instead of 600 HPS if you remove the replacement cost the gap is not as bad as it was. From what I am reading LED seems to have come on along way as well.

Any thoughts on the below one?

http://www.dutch-passion.nl/en/cannabis-seeds/product/led-grow-light/

Technical/Performance Parameters-
Input Voltage: AC 85-264v

Output Voltage: DC 35-45v

Input Frequency: 50/60hz
Average Power Consumption: 190w (maximum around 210w)
Power Consumption Tolerance: 5%
Working Environment: 20-40 °C 

Dimensions: 383*283*85(mm)

Weight: 5.6kgs

Component Quantities Specification
90 LED’s per panel, all ‘3w’ LED’s
6 LED Modules on each HighLite.
15 LED’s per module
Epistar 630nm, 660nm, 730nm & EPILED 460nm, EPILED 5700k (‘white’) LED
Genuine 2mm Aluminium metal-core printed circuit board.
(‘Alu MCPCB’)
Primary optic 120 degree, Secondary optic 90 degree
Isolated power drive with soft-start power delivery x3
12V Cooling fans x4
Aluminium heat-sink and casing

Intelligent monitoring system

 

[fr3d12]

Looking at going for a LED for a scrog instead of 600 HPS if you remove the replacement cost the gap is not as bad as it was. From what I am reading LED seems to have come on along way as well.

Any thoughts on the below one?

http://www.dutch-passion.nl/en/cannabis-seeds/product/led-grow-light/

You should search out a few of slipon's threads here, he's very knowldegable when it comes to LED's and is a friendly guy.
He gets amazing results with his custom made LED's.