Club 600

[Mohican]

Wait until you make tater tots! Mix up some Mr. Yoshida's and sour cream for dipping - mmmmmm!




Cheers,
Mo

 

[giggles26]

Ok 6 I need the hyrdo nerds help. I'm building a ebb n flow table out of my find from the other day and I need some help with deciding on what pump size and how big of reservoir to use.

Jig, who, dez, any of you guys that can chime in and help would be great.

 

[supchaka]

That pan you found was kind of shallow for doing a ebb flow (if I remember) So I would use it for my preferred method anyway, which would be a drain to waste system. It takes so many variables out that can be a hassle. The RW unislabs would be ideal and you would only water once a day still. Pump wouldnt need to be much, you could even water by hand if you felt so inclined.

Totally not what you were asking or the direction you were going but I'm that guy that usually goes the other direction

 

[DoobieBrother]

When do we get to see a new helmet cam video?

Soon!

I tried a few times already but the camera was tilted bad, or pointed too far down.
But I thnk I have it aimed properly.
Doing another tuning session for the scooter tonight, but will have to wait for a dry-ish spell to test it, as it's raining frogs & fritters and blowing like things that metaphorically produce prodigious amounts of air movement.
So, more later

 

[giggles26]

That pan you found was kind of shallow for doing a ebb flow (if I remember) So I would use it for my preferred method anyway, which would be a drain to waste system. It takes so many variables out that can be a hassle. The RW unislabs would be ideal and you would only water once a day still. Pump wouldnt need to be much, you could even water by hand if you felt so inclined.

Totally not what you were asking or the direction you were going but I'm that guy that usually goes the other direction

I'm open to all ideas really. It's about 5" deep so I wasn't quite sure if I could even make it work but I'll look into a drain to waste.

 

[TheGreenHornet]

Finally got em up and runnin boys!
heeyeyeyaww

 

[TheGreenHornet]

err.. still trying to figure out this new uploader. cant even see the big ones when i click on it

 

[HydroGp]

Nice! Tape pr0n from the morning! Looking good
Im up a little early cause i had so much fever everything is soaked and i could not keep warm. So now im waiting for the bath tub to be full while enjoying the fire oven.. Still no wake n bake. Gotta have the lunges ready first :/

 

[Dezracer]

Ok 6 I need the hyrdo nerds help. I'm building a ebb n flow table out of my find from the other day and I need some help with deciding on what pump size and how big of reservoir to use.

Jig, who, dez, any of you guys that can chime in and help would be great.

Both of those things are dependent on the size of the tray. What are the dimensions of the tray?

 

[jigfresh]

I would listen to the guys who've done tables before. I just know the systems I've run.

 

[DoobieBrother]

*pulled the trigger on a VT Bass Deluxe fx pedal at Guitar Center!

And I ordered two sets of Rotosound SM666 strings ($75, so don't complain, guitar guys )

And the guy at guitar center actually asked me how to spell "rotosound"...

And I bought a Planet Waves (Joe Satriani) 3" wide, padded guitar strap:


The fx pedal & strings will arrive by Monday, and will be doing a before & after vid for my youtube channel, and will link to it here in the 6.

Other than that, getting kitten supplies, and will get more tomorrow.
Toking on some delicious Romulan, and going to eat, watch something, and veg out.

 

[giggles26]

Both of those things are dependent on the size of the tray. What are the dimensions of the tray?

I'll get some for sure measurements tomorrow.

I'm baked and going to bed.

 

[budolskie]

Dst u recon they ready for the 18s, thus is the 4 hermie dippy iv just binned

 

[DST]

Yes, I would be potting up if my roots looked like that.

 

[budolskie]

Soon as they dry up again al be putting them in the 18s

 

[Cindyguygrower]

Shame about the Dippy's bud, were they snip's from the Dippy you had for about a year or new pip's ? I think i might have got a taste of it and was really nice.
I was out on the hunt for this elusive Pineapple clone that i had before, managed to grad another bit to puff and the snip should'nt be a problem. For those that remember, its an old cindy 99 x kali mist and was being called Scotch Mist just between the guy's holding it for kick's, i cant recover the snaps but she is a cracker all round keeper.
sorry for pic. The blob on the bottom bud is some iso hash, a little treat. It will knock me sideway's with next to no tollorence atm

 

[mr west]

Im gutted by the whole "selfed" dippy thing. there must of been some hermi pollen in the air when it was created

 

[Cindyguygrower]

youve nout to be gutted about man! Your work is great westy, one trait in one strain is no big deal, i suppose if its underlying in the remaining seed's then i can see how it could be a pain, but c'mon you have to be proud of what you guy's have done with bb

 

[mr west]

As far as im aware it is an isolated incident

 

[Cindyguygrower]

Im giving the S.Charm a go atm, just a seedling and an older DPQ, a right mixed lot and just added a Fireball's and Sweet Stomper Kush to the group. By the time i sex them i should be left with a fair few ladies of different origins. If the Dog looks good from the selfie's or the new seedling ive got from the 2010 s1's is another fine specimen im going to look for a dude out the f.b's or maybe platinum fire to keep the gene's.
should be interesting if nothing else