IF you are new to LED and want help choosing what to buy, POST HERE!

Status
Not open for further replies.
Cupid Stunt said:
I would like to see the ONYX with non frosted lenses..

I also dont believe that it replaces a 600W HPS>.. intensity perhaps but not coverage...
Click to expand...

You are correct sir on the coverage^^, 600w + hid coverage ain't happening............The revision should have a better reflector design, hopefully:)

olimmilo said:
Thinking of going led, due to heat issues. It would take a while and hope nothing comes up making me dip into savings.

Any way I have a 8x9 room what would be the best led to go with. The solarstorm 880. looks cool with UVB, really expensive, is that just marketing, or do they have a good product.
Click to expand...

Its gonna cost big $$$$ to cover a 8x9 with quality leds..................................SS880 is a good product, it does put out some noticeable heat due to the 5w diodes being driven over 4 watts..........there are better panels in that price range though imo....
 
image.jpg http://ecx.images-amazon.com/images/I/41zOBFV-YkL.jpg

48 AgroLED T5/Led Combination Fixture

^^^ these are junk I just inherited some from a friend of mine their not even a year old and they flicker half of them don't come on and the other half of the leds are so bright they look like they'll burn my house down.image.jpg

I know I know there shit pictures but you can clearly see they are shit lights
 
Last edited:
Good evening all, first time on the LED threads and my first post on Rollitup so if I make any mistake be kind in pointing them out. I got an early Christmas, I hope, I will need some imput from a LED persons on what I have found. I clean up foreclosed properties for banks and some body left behind some LED stuff. The questions will it make anything? 5 CREE COB CXA 3070-0000-00N004Z50F, 5 Artic Alpine 64 GT Rev 2 CPU coolers,5 Meanwell LPC-60-1050, Rhino 110v Ac to Dc power supply and power cords, flux, solder and couple tubes of thermal paste.

I have grown under MH for the past twenty some years and have been slowly trying to take in all the led info. Basically I understand what the LED components due, I think i do.

The space I'm working in is 3.5ft wide by 9ft long with 9 ft ceilings. I would like to elimanate the two 600 watt MH used for veg with COB's.
The 5 CXA 3070 are just a start. Will these Lpc-60-1050 drivers power the CXA3070, If so how good are the drivers for this CXA3070? I can always buy new drivers to power the CXA3070 and use the LPC-60-1050 to power any additional fill in COB's for the3.5ft wide by 9ft long hallway. If additional COB's light is needed, what should I consider and the light coverage of what I have and should be considered.
The picture is of the room or should I say hallway.
 

Attachments

  • image.jpg
    image.jpg
    895.7 KB · Views: 16
Last edited:
maddmattmurdock said:
Good evening all, first time on the LED threads and my first post on Rollitup so if I make any mistake be kind in pointing them out. I got an early Christmas, I hope, I will need some imput from a LED persons on what I have found. I clean up foreclosed properties for banks and some body left behind some LED stuff. The questions will it make anything? 5 CREE COB CXA 3070-0000-00N004Z50F, 5 Artic Alpine 64 GT Rev 2 CPU coolers,5 Meanwell LPC-60-1050, Rhino 110v Ac to Dc power supply and power cords, flux, solder and couple tubes of thermal paste.

I have grown under MD for the past twenty some years and have been slowly trying to take in all the led info. Basically I understand what the LED components due, I think i do.

The space I'm working in is 3.5ft wide by 9ft long with 9 ft ceilings. I would like to elimanate the two 600 watt MH used for veg with COB's.
The 5 CXA 3070 are just a start. Will these Lpc-60-1050 drivers power the CXA3070, If so how good are the drivers for this CXA3070? I can always buy new drivers to power the CXA3070 and use the LPC-60-1050 to power any additional fill in COB's for the3.5ft wide by 9ft long hallway. If additional COB's light is needed, what should I consider and the light coverage of what I have and should be considered.
The picture is of the room or should I say hallway.
Click to expand...

AFAIK, 5x cxa3070's aren't just a start, they're good enough for a nice finish.

I'll let the experts chime in on drivers.
 
reasonevangelist said:
AFAIK, 5x cxa3070's aren't just a start, they're good enough for a nice finish.

I'll let the experts chime in on drivers.
Click to expand...

Thank you for your reply, so would I be better to start thinking about using this in the flower room. The flower room (I will post a pic when the lights are on) is a 6x12 with 9 ft ceilings, which contains 3000kw of MH. I run DWC a six bucket setup, three are SOG( each bucket has three of the same strain as one of the bushes. It's a taster to the main event) and three are Bushes, I would like to use this gift as best suited to full advantage even if I have to invest in more equipment. Any suggestion is greatly appreciated.


reasonevangelist said:
AFAIK, 5x cxa3070's aren't just a start, they're good enough for a nice finish.

I'll let the experts chime in on drivers.
Click to expand...
 
maddmattmurdock said:
Good evening all, first time on the LED threads and my first post on Rollitup so if I make any mistake be kind in pointing them out. I got an early Christmas, I hope, I will need some imput from a LED persons on what I have found. I clean up foreclosed properties for banks and some body left behind some LED stuff. The questions will it make anything? 5 CREE COB CXA 3070-0000-00N004Z50F, 5 Artic Alpine 64 GT Rev 2 CPU coolers,5 Meanwell LPC-60-1050, Rhino 110v Ac to Dc power supply and power cords, flux, solder and couple tubes of thermal paste.

I have grown under MD for the past twenty some years and have been slowly trying to take in all the led info. Basically I understand what the LED components due, I think i do.

The space I'm working in is 3.5ft wide by 9ft long with 9 ft ceilings. I would like to elimanate the two 600 watt MH used for veg with COB's.
The 5 CXA 3070 are just a start. Will these Lpc-60-1050 drivers power the CXA3070, If so how good are the drivers for this CXA3070? I can always buy new drivers to power the CXA3070 and use the LPC-60-1050 to power any additional fill in COB's for the3.5ft wide by 9ft long hallway. If additional COB's light is needed, what should I consider and the light coverage of what I have and should be considered.
The picture is of the room or should I say hallway.
Click to expand...

Holy crap did you ever get lucky!! You just found around $600 of the finest LED gear out right now. Those cobs are perfect for flowering and can function for veg. They won't cover a room that big though.. Each one will produce around 40 watts of light with those drivers. Those drivers will function perfectly although they are not the highest output but they are fairly efficient. Is the setup already put together or is it all separate parts?

Send some luck my way maybe?
 
maddmattmurdock said:
Thank you for your reply, so would I be better to start thinking about using this in the flower room. The flower room (I will post a pic when the lights are on) is a 6x12 with 9 ft ceilings, which contains 3000kw of MH. I run DWC a six bucket setup, three are SOG( each bucket has three of the same strain as one of the bushes. It's a taster to the main event) and three are Bushes, I would like to use this gift as best suited to full advantage even if I have to invest in more equipment. Any suggestion is greatly appreciated.
Click to expand...
ah, well, that's a rather large space... a 6x12 w/ 9ft ceilings might need a bit more than 5x cxa3070's... i'd recommend SupraSPL's thread (as well as a few others'... keep an eye out for signature links), and consulting SDS's LED analysis. There are several users here who have posted their DIY adventures with these COBs and similar. If you can afford it, i'd recommend obtaining some cxa3590's (not currently available in singles, i think...), or just more of the cxa3070's. Hang around a while, i'm betting the more experienced LED guys can help you out.
 
clp56 said:
Holy crap did you ever get lucky!! You just found around $600 of the finest LED gear out right now. Those cobs are perfect for flowering and can function for veg. They won't cover a room that big though.. Each one will produce around 40 watts of light with those drivers. Those drivers will function perfectly although they are not the highest output but they are fairly efficient. Is the setup already put together or is it all separate parts?

Send some luck my way maybe?
Click to expand...


I have not got through all the boxes, I'm beat it was 108 outside and 115 inside these houses and I do not want to miss qoute any of what I found. Give me five minutes...... Ok I'm back here is the total. Three boxes in totally. 1st marked veg had the above mentioned items plus some cool connectors. The second box had two Foil packs marked 3590 and 4 more drivers the numbers are different, 60-1400. The third box has two CXA2520 two and two CXA1507 and one out of the wrap with no markings?????? a Sh*t ton of wire and looks like a huge roll if solder. Ok that's it that's all it is all in peices. Lots of pieces. Their is a lot of paper work here too...
 
maddmattmurdock said:
I have not got through all the boxes, I'm beat it was 108 outside and 115 inside these houses and I do not want to miss qoute any of what I found. Give me five minutes...... Ok I'm back here is the total. Three boxes in totally. 1st marked veg had the above mentioned items plus some cool connectors. The second box had two Foil packs marked 3590 and 4 more drivers the numbers are different, 60-1400. The third box has two CXA2520 two and two CXA1507 and one out of the wrap with no markings?????? a Sh*t ton of wire and looks like a huge roll if solder. Ok that's it that's all it is all in peices. Lots of peices.
Click to expand...
lol, sounds like you scored...
 
I'm starting to realize that this is only a third of the booty, I still scored The invoice says 10 3590 and 10 3070 and 10 2510 and 10 1507 and 10 2011 and 3200 dollars. The drivers,fans/heat sinks are half here. I looked through every box left at the house. What a great gift!!
 
maddmattmurdock said:
I have not got through all the boxes, I'm beat it was 108 outside and 115 inside these houses and I do not want to miss qoute any of what I found. Give me five minutes...... Ok I'm back here is the total. Three boxes in totally. 1st marked veg had the above mentioned items plus some cool connectors. The second box had two Foil packs marked 3590 and 4 more drivers the numbers are different, 60-1400. The third box has two CXA2520 two and two CXA1507 and one out of the wrap with no markings?????? a Sh*t ton of wire and looks like a huge roll if solder. Ok that's it that's all it is all in peices. Lots of pieces. Their is a lot of paper work here too...
Click to expand...

Lmao, it wouldn't surprise me at all if we found out that who ever lost that hardware was a frequent visitor here at the led section on rollitup.
 
maddmattmurdock said:
Then this will be interesting. An suggestion?
Click to expand...

Of course, you can put them in the mail and send them my way lol. Nah seriously, I was just pointing out that there are quite a few people here on the forum in the led section doing diy lights with the exact COBs you found. I hope you enjoy them and grow many gorgeous buds my friend.
 
I'm hoping (not really) someone will say the name on the invoice, then my honest inter self would take over and would be like you pay for shipping. All exclusions will apply after construction begins, Tomorrow.
 
Last edited:
maddmattmurdock said:
I'm hoping someone will say my name is what is on the invoice then my honest inter self would take over and would be like you pay for shipping. All exclusions will apply after construction begins.
Click to expand...


Pic of Flower room!! Is 6ft x 9ft long.
 

Attachments

  • image.jpg
    image.jpg
    1 MB · Views: 28
  • image.jpg
    image.jpg
    1.2 MB · Views: 25
Last edited:
SnotBoogie said:
There's been a deluge of growers new to the LED game making threads to request buying advice recently.

To combat this, I hope to centralise "Recommend me a LED light for my situation" threads into one place (as the answer is often the same).

IF you need help deciding what light to buy, post your situation below! we will endeavor to help you!

PLEASE be specific and check your question hasn't been answered already!


I will reserve the next post so that if the community comes together to produce a FAQ, we can keep it nice and handy at the top.

Sticky would be nice. :grin::grin:
Click to expand...
ill keep it simple,,,2x2foot space, 1 plant , which led is best for price
 
Status
Not open for further replies.
Back
Top