LoganSmith
Well-Known Member
The pic did not rotate. The area is 8.5 top to bottom. and 6' wide.
Three areas 1. mother, 2. flower, 3. cloner / extra area.
Three areas 1. mother, 2. flower, 3. cloner / extra area.
Grow Chamber's, HATCH Style
- Thread starter HATCH
- Start date
LoganSmith
Well-Known Member
When I was going through different designs I figured I would need more height for the plants that will be in flower and the mother plants. The clones will only be 6".
I didn't know if it would be better just to have the mother plants in soil and make the bubbler for the cloner and areo for the flowers.
Do you think that two feet high will big enough for the mothers? I don't.
I like the height of the flower area, this would allow me not to have to bend down as much.
How would revamp the space? I will also need to know about air flow so the temps stay in the right zones.
LoganSmith
Well-Known Member
I also went back into your tread and was looking for pics of your bubbler, I don't if I'm just not getting it or what.
The machine that you made is like an EZ-Clone, right? With sprayers/misters.
I thought a bubbler was when you would use air stones and when the (bubbles) rose to the top and popped the water would splash the stems of the cuttings.
The machine that you made is like an EZ-Clone, right? With sprayers/misters.
I thought a bubbler was when you would use air stones and when the (bubbles) rose to the top and popped the water would splash the stems of the cuttings.
HATCH
Well-Known Member
The Mother Can Be In A Space Of 2'-6" To 3', They Won't Get That Big, Because You Will Be Taking The New Grow For Clone's.....If You Feel Better With Mom's Being In Soil????,That Up To You........Bubbler's For Clone's-Big Yes,,,,,,,Aeroponic's For Flowering-Another Big Yes!!!
AirFlow, You Will Need to Exchange The Air Every Hour Or So, When Light's Are Off, I Run My Intake & Exhaust Along With The Light's On, To Control The Heat....Then When They Are Off They Come On Every two Hour's For 15-Minutes, In The Grow Chamber's I Have Osculating Fan's That Run 24/7, To Move The Air Though The Plant's At All-times.
Hope That Covered That, If Not We'll Try Again.
HATCH
Well-Known Member
You are Right On All The Above, My Bubbler's Have The Airstone's just Like That, I Just Added Aeroponic's Technology, To help Water The Root's Better, & With The Mister's It Create's More Oxygen.
LoganSmith
Well-Known Member
Its not that I feel better with the mothers in soil, its were they are at now. Or maybe I do feel a little as ease scene this will be my first time growing this way.
LoganSmith
Well-Known Member
So if this is the case are your cloning machine and Aeroponics machine the same, just in different sizes?
Are you using 2" net pots in both the cloner and flower area????
I just got back for HD and they didn't have shittttttt. Off to Lows
HATCH
Well-Known Member
Ok, The Reason They Are Not The Same Is, The Bubbler/With Aeroponic Technology, Are All In One Airstones, Pump/ Mister's, & It's Own Res.So if this is the case are your cloning machine and Aeroponics machine the same, just in different sizes?
Are you using 2" net pots in both the cloner and flower area????
I just got back for HD and they didn't have shittttttt. Off to Lows
The Aeroponic's Pod's Just Have The Mister's Inside & Drain To A Res, That Has The Airstone's & Pump's In Them.
Is That Maybe Alittle Clearer????
Yes, I Use The 2" Net Pot's All The Way.
Been There Done That!!!,,,,,,,Sometime Neither Have Anything!!!!,,,,,,That Will Pissss You Off, & Get Frustrating!!!......But Eventually You Will Get It All!!!!!!
HATCH
Well-Known Member
The Only Thing Abought That, That I Can Think Of, Is After A While I Like To Flower The Mom's & Rotate New One's In From Clone's.....They Get To Big, & Have To Big Of Root Structure.....??????,,,,,,,,,That Just My 2cent's On That....
LoganSmith
Well-Known Member
Ok, yes now I understand the difference between the two. I just wasn't thinking clearly.
HATCH
Well-Known Member
LoganSmith
Well-Known Member
Hatch can you take a moment and explain what you would do different using my total area, the pic of the diagram.
I'm just not processing the way this will turn out in my mind, due to the lack of experience in this area. I just rather not have to rebuild the whole area again.
Thanks Bro-
Peace-
LoganSmith
Well-Known Member
Not very far, I was able to get most of the items on the list that you provided.
I'm unclear on what is for what at this time but I'm sure We will get going.
I didn't get the 32 180* misters because they were $1 each.
3/4" hose swivel connect female threads-3/4 male thread's inline filter
3/4" hose swivel connnect female thread-3/4" male thread Y
2' 1/2" water hose male-female opposite
did not find yet.
LoganSmith
Well-Known Member
I don't think I said anything about a tent.???
My area is 6'wide x 30"deep x 8 1/2' high.
The area is a pre built in unit in a wall from the 50's or something. Right now the area has a shelf that is 5 1/2' from the ground.
The diagram shows three areas, area A. would be 2' wide x 6 1/2' high x 30" deep(mother area). Area B. would be 4' wide x 6 1/2' high x 30" deep (flower area). Area C. would be 6' wide x 2' high x 30" deep (clone area)
This is just a thought and nothing is set in stone.
LoganSmith
Well-Known Member
You must have been busy with all of your clones. Let me know how things turned out.
Peace=)
Peace=)
HATCH
Well-Known Member
HATCH
Well-Known Member
Ok LoganSmith, Hey What's UP?????,,,,,,,,,,,In The First Drawing, Is The Front View Of The Grow Area, The Bottom Can Be 5' Tall x 6' Wide, Have A Door To Access The Plant's Of 3' Wide x 2'-6" Tall, & A Access Door To Get To The Res. That Could Be 2' Wide x 1' Tall........I Didn't Put It On The Drawing, But In The Front Panel, Down Low You Could Put Your Intake Air, Then In The Oppisite Side In The Upper Corner Put A Exhaust Air.........This Bottom Area Would Be Your Flower Chamber, You Could Put Your Light Mover & 600w. HPS, & Have 4-Aeroponic Pod's, With Up To 15 Or So Plant's In Each, Or Less What Ever You Are Needing.Hatch can you take a moment and explain what you would do different using my total area, the pic of the diagram.
I'm just not processing the way this will turn out in my mind, due to the lack of experience in this area. I just rather not have to rebuild the whole area again.
Thanks Bro-
Peace-
It Would Be Real Easy To Do This, Just Put 2"x4" Around The Back & Side's Of The Space At 1' & At 5',,,,,Cut A Piece Of Plywood 30" x 6' For The Top Piece, The Front Piece Will Be 5' Tall x 6' Wide & Where You Are Going To Add The 1' x 6' Piece To The Front Top To Get 5', Put A 2"x4"x6' Across It Spitting The Joint.,,,,,,Then Cut A Piece Of Plywood 29 1/4" Wide x 6' For The SubFloor For The Aeroponic Pod's Will Sit Above The Res., Get A Hole Saw & Cut Some Hole's For The Drain's.
You Might Have To Get In The Flower Chamber Ounce You Have It Biult, & Check For Light Leak's???
The Top Would Be 3 1/2' x 6', You Could Have 3-Aero-Bubbler's For Clone's, & Your Pot's For Mom's, Or Just 4-Aero-Bubbler's For All Of Them, That Would Be Up To You, Have 4' & 2' Flourescent's In The Top. You Could Have A Front On It Our Leave It Open???
Ok, The Second Picture Is Just A Cut-Away, Of What The Inside Would Look Like.
This Is Something We Can Start With. So Check It Out & Holler Back!!
Like You Said, None Of This Is In Stone!!!,,,,,,Just My 2cent's!!!
Attachments
LoganSmith
Well-Known Member
What up??????????????
Your drawing is what my area looks like now, just with out the doors and aero pod.
As of now I'm just getting the aero cloner done. I got the same sub pump that you have 258gph for 15 bucks. U got to love HF. I will take some pics and show you.
Your drawing is what my area looks like now, just with out the doors and aero pod.
As of now I'm just getting the aero cloner done. I got the same sub pump that you have 258gph for 15 bucks. U got to love HF. I will take some pics and show you.