Buddabuilder
Member
How far are you along in your growth my friend? I'm at 12 days from seedling but I feel they are kind of behind.
Welcome New Members!
- Thread starter matth82003
- Start date
Two weeks in with Willie Nelson(Vietnamese Black X Highland Nepalese) 2 seedlings . Added super silver haze 9/07 1 seedling which is two inches now.
Buddabuilder
Member
Amazing!! Do you have a grow journal that I could follow?
Not as of now, I have pics with post within Aug.
Buddabuilder
Member
Ok cool ... Link to old journal is perfectly fine
AdrienneMarie
New Member
AdrienneMarie
New Member
My birthday is on my profile.
12golf
Well-Known Member
You all make me jealous! I can't start to set my room up till middle of November. I'm going to have to quit reading all this or I'll have a accident in my shorts! You know when you get my age you can't trust a fart! Never to old to learn and this wants me to grow some powerful smoke. I have a couple of buddies that can't wait either and one of them takes care of my portfolio and does a hellava job! I'll just have to dream for now.
Jack_Rabbit
Active Member
hey guys
just a quick hello and a question how is everyone dealing with grow fever?
my girlfriend went crazy at me, as have changed the spare bedroom into a tropical oasis....
however after much knee bending, grovelling all that relationship good stuff i am back in the bed and she's still mad in the head! so all is well however all was not well with my first grow-
https://www.rollitup.org/t/quick-change-hydro-malfunction-grow-journal.842945/#post-10882105
just a quick hello and a question how is everyone dealing with grow fever?
my girlfriend went crazy at me, as have changed the spare bedroom into a tropical oasis....
however after much knee bending, grovelling all that relationship good stuff i am back in the bed and she's still mad in the head! so all is well however all was not well with my first grow-https://www.rollitup.org/t/quick-change-hydro-malfunction-grow-journal.842945/#post-10882105
..BULLIT..
Active Member
new here .
been growing for many years and hope to just check out the grows and the people..
hope to see some soon
been growing for many years and hope to just check out the grows and the people..
hope to see some soon
Okallright
Well-Known Member
hi ..BULLIT..
i think you'll enjoy the knowledge of people here there quite incredible..... Well some .lol.
see you around
..BULLIT..
Active Member
gee thanks buddy
Okallright
Well-Known Member
that's quite ok
..BULLIT..
Active Member
see you aroundthat's quite ok
Hello and welcome.
..BULLIT..
Active Member
welcome and hello
Jimbo01
Well-Known Member
Hello everyone. I've been lurking around the site for awhile on & off (couple years) and decided to take the next step and sign up. I bought a 3x3 tent and DWC set up with a 8 bulb t-5. I started a tomato clone on 8/17 and am currently in veg 18-6 mode to learn the tent and DWC system. I'm also building (almost done) a space bucket that I'll be using for some vintage seeds. Anyways, I just wanted to introduce myself and hope to gain more knowledge. I've Been considering buying a growers bible but unsure of which to buy. Any help would be appreciated.
KrustY SoX
Member
First time posting, I started reading a few months ago on here and all over the place. First time grow, currently In flower in a 3.5x3.5 with (1) 400w mh and (1) 600w hps in cool tubes above canopy, carbon filtration ventech 6", dehumidifier, a/c for hotter days. 50g (40 used ) res using nova bloom @ Lucas , koolbloom, floralocious+.
16-1700ppm but 2k+ ppm. Contaminants causing false readings but staying healthy looking at current ppm. PH 5.9
Techniques used: LST, super cropping, fiming, defoliation. tried scrog but that chicken wire managed to upset me while baked so I ditched it I'll try bigger mesh another day. So far with lst, super and defol I'm okay with out a net.
Clones in a 20g dwc, x2 full spec led @ 109w used 180w advertised and (1) single chip 35w 450nm blue led w/120 lens.
I use DI water, for those that don't know the cost is around the same buying distilled but I use a " zero water " brand water filter the kind that comes with TDS meter from target. Filters over 250+ ppm down to 0 then slowly over filtering 30+ gal 25ppm before it needs a new filter.
If there's any advice as a noob to give others it's start LST ( tie down ) from seedling instead of waiting till the stem is already too stiff. Get a big res if dwc it's more forgiving. Add shredded cube above water in dwc bucket mixed with extreme garden mykos and place seedling in rock cube ontop. Makes a difference in roots or really does.
When getting led lights check for >3w diodes. Check lense angle need <90 deg for actual power transfer and penetration. Check power used vs advertised power to see what your actually buying.
If your making an led light calculate what type of light your trying to replace say 400w hps calculate what watts go to what spectrum so you can have the basis leds covered before you add optional colors.
16-1700ppm but 2k+ ppm. Contaminants causing false readings but staying healthy looking at current ppm. PH 5.9
Techniques used: LST, super cropping, fiming, defoliation. tried scrog but that chicken wire managed to upset me while baked so I ditched it I'll try bigger mesh another day. So far with lst, super and defol I'm okay with out a net.
Clones in a 20g dwc, x2 full spec led @ 109w used 180w advertised and (1) single chip 35w 450nm blue led w/120 lens.
I use DI water, for those that don't know the cost is around the same buying distilled but I use a " zero water " brand water filter the kind that comes with TDS meter from target. Filters over 250+ ppm down to 0 then slowly over filtering 30+ gal 25ppm before it needs a new filter.
If there's any advice as a noob to give others it's start LST ( tie down ) from seedling instead of waiting till the stem is already too stiff. Get a big res if dwc it's more forgiving. Add shredded cube above water in dwc bucket mixed with extreme garden mykos and place seedling in rock cube ontop. Makes a difference in roots or really does.
When getting led lights check for >3w diodes. Check lense angle need <90 deg for actual power transfer and penetration. Check power used vs advertised power to see what your actually buying.
If your making an led light calculate what type of light your trying to replace say 400w hps calculate what watts go to what spectrum so you can have the basis leds covered before you add optional colors.
Attachments
Last edited:
