Bubbagineer
Well-Known Member
Thanks all. I bought the light. At the store I put my hand on the bottom of the ballast enclosure - it was only warm to the touch. I'll post pics tonight.
Thanks for all the info. I figure a 4x4 ought to handle two of them well enough. I agree one is not enough alone.once again, I have two of these. I would not recommend going a 3x3 tent, and would pick up a 2.7x2.7 tent. only thing I would use it for in a 3x3 is a SCROG. the PAR starts getting too low the higher you need to pull it, and then your dipping under 500 PAR, which I would think is below standard. some guy over at IC was using them in a 3x3, but he didn't show much pics and I know he went on to use his LED for side lighting, which tells me he wasn't happy with the performance in a 3x3. look at rives grow over at IC, he used a 2.7x2.7 area in a 3x3 tent I believe. also what's better then a tent built perfect for this light. there's another dude using one in that exact tent size, and you'll be shocked at the size of his colas. your setups, I'm just warning you, in everything I know, I would only use a 3x3 for veg wit the 942.
Well you did just add 325w to the tent .......should be worth it thoughUpdate on the temps. Spoke to soon. Had to kick the fan up to 80% or so and temps are 84.
No........only two ballast on the market can run this bulb.......Phillips/cerametekI'm curious if a solis tec matrix ballast would run 315w cmh bulb ?
They do very well i have buddies using it side by side 600w best you can buy. and he said the lec is smoking it.. i been thinking on it too.. i want a second lightHi all,
I researched but could find next to nothing about these lights. Is anyone running them? I saw one set up in a 4x4 at my local WTG yesterday. Looked like a 600w HPS only a whiter light. Intensity felt nice on the back of my hand a couple of feet below the fixture. Dude at the store said he had a buddy using them and doing well........
Heres the draw for me... very little heat load. The ballast is internal to the unit even and there seems to be less heat than from an 8 bulb T5. I just upgraded my grow area to a 4x4 tent and my (3) 240w LEDs seem lost in there. I'm thinking of getting one of these and using the LEDs around the perimeter.... would be nice to know if they actually grow weed before I drop the $500.
Thanks again for any assistance.
Here's the sales blurb and a link to the site.
Sun System® LEC 315 utilizes cutting edge Light Emitting Ceramic™ technology. Highly efficient agriculturally engineered CDM-T Elite 315/930/U/E Agro Lamp (lamp included). Greatly improved full color light spectrum out of next generation ceramic lamps. Higher amounts of beneficial UV and far red spectrums increase the lamps growth power to the plants. Very high 1.95 PPF per second light source. 3100K color temperature, high 92 CRI, 33,000 initial lumens (105Lm/W). Long life 20,000 hour lamp. High 90% lumen maintenance @ 8000 hr./High 85% PPF maintenance @ 20,000 hr. Unique open rated lamp construction reduces radiant heat from the arc tube and is suitable for open fixture use. 50/60 Hz low frequency, square wave, highly efficient electronic ballast rated for 50,000 hour ballast life. LEC 315 driver incorporates built in thermal protection. One year warranty lamp.
https://www.sunlightsupply.com/p-14953-sun-system-lec-315-light-emitting-ceramic-fixture.aspx
how is the heat with this light? im going to run it in a darkroom twin90.Here's some pics for you all. I really like the lights. I'm at 4.5 weeks of flower. I've had some issues with nutes and the Blumats, but the plants that I haven't sabotaged with my noob skills are looking to produce heavy. I've got two of the 315w fixtures over a 4x3 area.....
If heat is your biggest issue go with the lowest power draw/highest efficiency ====== at 200(top-bin nichia cw 250lm+/w)whats better the 315 lec, the rocket plasma or the avanced ds200xte or the apachetech at200? im growing on a small space and stealth is a must, and heat must be easily controlled... also i want to expand to a 3x6 area in the future but i dont want to have to buy two bigger lights
If heat is your biggest issue go with the lowest power draw/highest efficiency ====== at 200(top-bin nichia cw 250lm+/w)
IDK how loud the fans are in the at200 though.........maybe gg/puff can vouch for the "stealtyness" of it????????
or DIY cree cxa cobs if your handy
rocket plasma is a no IMO due to the 3000-3500 hr bulb used.........lol............also we don't know the bins on the DS 200xte, so that's out too until proven otherwise.
lec is great , but 315w+ ballast is allot of wattage to deal with in a small space?..........what are your actual dimensions btw???
3x5x8s the size of the closet. i can use the closet but i was going to put the tent in the closet
I wouldn't bother with them in 2014........better options for the $$$what about an older Diamond series 2 or 300?
that size is fine for the LEC315.......................just make sure to have an active exhaust
I wouldn't bother with them in 2014........better options for the $$$
Yeah their awesome.......unbeatable atm..holy crap, i just discovered the diy cree cob 100 watt
im thinking on grabbing 2 or 3 for my space, over one or 2 plants i read a thread on another forum, that was like wow!! you dudes are freaking geniuses!Yeah their awesome.......unbeatable atm..
Be safe and have fun building grower