Like I told your ass before stop posting your bullshit grow of the same fucken plant 15 times on the same fucken page. Do you knot have any flowering pics or you never made it that far? your showing pictures of excess pistil growth. your room is too hot nigga STEP UP YOUR GAME BEFORE YOU STEP TO ME!
You still never provided any fucken proof about salts not needing to be ph'd you dumb fuck. This is the last time I answer your stupid ass or i'll just find you in person and we can handle it bitch. I got the money to go anywhere bitch ass nigga!!!
Good luck with that. Your such an idiot. 75 degrees max is too hot? Not where I come from. It's called healthy calyx development retard. I'm sure your not real familiar what healthy plants look like so make sure to take a close look at mine. You do understand that each "hair" or pistil comes from a calyx, right? Pistil + calyx = bud or is that a bit to advanced for you? It's actually 16 plants and 2 strains but whose counting? As for "proof", here ya go, I hope you can comprehend it:
Water Quality: pH and Alkalinity
Recently, some growers have expressed concern about the "high pH" of their irrigation water and its potential adverse effects on plants. The purpose of this article is to allay some of these concerns by pointing out the difference between "high pH" and "high alkalinity".
Alkalinity and pH are two important factors in determining the suitability of water for irrigating plants.
pH is a measure of the concentration of hydrogen ions (H+) in water or other liquids. In general, water for irrigation should have a pH b etween 5.0 and 7.0. Water with pH below 7.0 is termed "acidic" and water with pH above 7.0 is termed "basic"; pH 7.0 is "neutral". Sometimes the term "alkaline" is used instead of "basic" and often "alkaline" is confused with "alkalinity".
Alkalinity is a measure of the water's ability to neutralize acidity. An alkalinity test measures the level of bicarbonates, carbonates, and hydroxides in water and test results are generally expressed as "ppm of calcium carbonate (CaCO3)". The desirable range f or irrigation water is 0 to 100 ppm calcium carbonate. Levels between 30 and 60 ppm are considered optimum for most plants.
Irrigation water tests should always include
both pH and alkalinity tests.
A pH test by itself is not an indication of alkalinity. Water with high alkalinity (i.e., high levels of bicarbonates or carbonates) always has a pH value ÷7 or above, but water with high pH doesn't always have high alkalinity. This is important because
high alkalinity exerts the most significant effects on growing medium fertility and plant nutrition.
Acidification of High Alkalinity Water
Many greenhouse operators inject acid (e.g., phosphoric, nitric, or sulfuric acid) into water with problematic high levels of alkalinity.
Acidification of water having high pH but low alkalinity is rarely necessary. The use of acid injection sh ould be considered very carefully for several reasons. First, it is an extra step in production which will require additional materials and equipment. Second, acids are dangerous to handle and may damage some injectors and piping systems.
Third, phosphoric or nitric acid are sources of P and NO3, so the regular fertilizer program may need to be modified to take into account the addition of these nutrients. This would depend on how much acid must be used to neutralize the alkalinity and reduce pH. Fourth, sometimes
acid injection causes the solubilization of normally precipitated (unavailable) forms of trace elements resulting in levels toxic to plants.
The amount of acid required to reach the desired pH (i.e., neutralize alkalinity) is determined by laboratory titration of a water sample with the appropriate acid or by a calculation procedure. Some "fine-tuning" may be needed later when actual inject ion is started. Acid is always injected prior to the addition of fertilizer or other chemicals.
Prepared by Douglas Cox
Plant and Soil Sciences
University of Massachusetts
Amherst
August 1995.
Truth be told the only "proof" I need are my eyes.
i can tell you know what your doing but i still don't think that a .3 ph variant is the problem with his plant. sorry man, I'm sure its something really simple that can be chalked up to grower error and being new. ya, that other guy said it too, he's not in soil so raising it would just push out his ph more outta whack. whatever, not ph.
