Hyperbaric Extraction Tell Me More Please.

P

pureextractions

New Member
So if you are reading this post than I assume you are just as curious as I am about this new and clean process or you have hopefully got some knowledge that you'd like to spread. Some of the things I am most interested in finding out is first off where might i find a mediocre to professional grade hyperbaric chamber, and what makes it a mediocre to professional grade. What raw material would be best used in this Method(Kief, fresh/frozen trim, dried trim, mature buds). then what pressures would you recommend along with temperatures. and that's all I can think of this moment but please if you have any more info than what I'm asking for reply and let us know. even if it's just your opinion on the product. I'd like to try and absorb as much information on the process as possible before attempting it.
 
lio lacidem

lio lacidem

Well-Known Member
Fadedawg said:
By hyperbaric chamber, I infer you are talking about a closed loop extraction system operating above atmospheric pressure.

You might start by reading:

http://skunkpharmresearch.com/butane-safety/
http://skunkpharmresearch.com/booming-bhotards-the-explosion-of-explosions/
http://skunkpharmresearch.com/passive-butane-extractor-and-reclaimer/
http://skunkpharmresearch.com/mk-iii-terpenator/
Click to expand...
Fade the info I found about this(very limited info) its a solventless extraction process. Ill try and post up what little info I found
 
P

pureextractions

New Member
lio lacidem said:
http://www.theweedblog.com/beware-consumption-of-low-quality-poorly-purged-butane-hash-oil/
this is a anti bho page but has some info on hyperbaric. Apparantly harborside us only one doing yet
Click to expand...
Thank you for the information lio I just went to the cannabis cup in san bernadino yesterday with my pen and notebook ready. but alas all I got was some annoyed vendors wanting to keep whatever information they do have to themselves. and some really friendly vendors that just didn't know what I was talking about.
 
skirulz

skirulz

Member
Rumor has it harbor side uses a kugelrohr short path distillation device to turn crap extract into the clear.

Essentially, it is reclaim.
 
Fadedawg

Fadedawg

Well-Known Member
lio lacidem

lio lacidem

Well-Known Member
Fadedawgt: 11306482 said:
It opened later. It must have been off line or jammed with volume.

They seem to be using the term hyperbaric to describe thin film vacuum fractionating, which would be the exact opposite of "hyper" barametric, or pressures above 14.7 psia.

Here are a couple resources for thin film molecular distillation that we are looking at.

http://www.popeinc.com/still-products/wiped-film-stills-evaporators
http://www.myers-vacuum.com/
Click to expand...
So I spoke to someone at harborside. They claim no solvent used, ground up material is put into a hyperbaric chamber extreme pressure added. The cannabinoid turn to fog fog is pulled into a vessel with neg pressure. When vapor cools and condenses you have hbc wax?
Hows that sound to you fade?
 
Fadedawg

Fadedawg

Well-Known Member
lio lacidem said:
So I spoke to someone at harborside. They claim no solvent used, ground up material is put into a hyperbaric chamber extreme pressure added. The cannabinoid turn to fog fog is pulled into a vessel with neg pressure. When vapor cools and condenses you have hbc wax?
Hows that sound to you fade?
Click to expand...
Don't know, lets play with it???

hy·per·bar·ic
(hī′pər-băr′ĭk)
adj.
Of, relating to, producing, operating, or occurring at pressures higher than normal atmospheric pressure: a hyperbaric chamber.

Could easily just be a play on words, and the extreme pressure part is what I don't get.

You could easily vaporize with heat and condense the vapor, and it wouldn't require extreme pressures. Anything above atmospheric pressure could be called hyperbaric, so a Volcano blowing up a turkey bag is hyperbaric.

You could blow a hot air stream through the material, which would slightly pressurize the chamber and vaporize the resin, and then discharge that into a chamber kept under negative pressure, which would serve to help rapidly cool the vapor through decompression, so that it condensed on chilled surfaces.
 
S

Space Pop

New Member
HBC Extracts are the new wave. any one down to ride?
First things first, find a way to pressurize a container then drop it in poor man nitrous and then attach a second vessel now raise atmospheric pressure at least 4 atmospheres or 60 or more psi. then wait for the secondary chamber to fill up with liquid gold depressurize so the liquid gas returns to its normal atmosheric gas state and wahlah we have HBC extract. sound about right anyone? has anyone built a chamber yet and would like to share?? I am loving this brilliant new concept. now can someone point me in the right direction to buy or make this equipment. ready to go. BHO is old news CO2 doesn't quite get there HBC does what the clear is without the solvents. if you are in the LA area and want to collab on this project lets do it!
 
Mr.CrumWell

Mr.CrumWell

Member
Space Pop said:
HBC Extracts are the new wave. any one down to ride?
First things first, find a way to pressurize a container then drop it in poor man nitrous and then attach a second vessel now raise atmospheric pressure at least 4 atmospheres or 60 or more psi. then wait for the secondary chamber to fill up with liquid gold depressurize so the liquid gas returns to its normal atmosheric gas state and wahlah we have HBC extract. sound about right anyone? has anyone built a chamber yet and would like to share?? I am loving this brilliant new concept. now can someone point me in the right direction to buy or make this equipment. ready to go. BHO is old news CO2 doesn't quite get there HBC does what the clear is without the solvents. if you are in the LA area and want to collab on this project lets do it!
Click to expand...
sounds fun
 
cannakis

cannakis

Well-Known Member
Now I have a friend who a year ago had a buddy move down here... His buddy was making Sheet Trays Full of beautiful solventLess shatter Supposedly Just from some secret water method he developed... It's definitely Not bubble hash it is a full sheet tray filled with resin.! And when he was out in Colorado he had like five speed racks filled with the sheet trays!
 
Mr.CrumWell

Mr.CrumWell

Member
petroleum extracts will be laughed at by our children. they way we look at uncured and un trimmed brick weed will be how they see BHO and PHO and other non organic extracts.
 
You must log in or register to reply here.
Top