ewbwa25
Member
So i've been wasting time on grasscity and just came back here. I have a new room its dimensions as stated above. I have 3 (actually 4) 1000k lights. I only plan to use about 12 ft for my flowering area for . But my problem is my 5 foot width. I was thinking of installing a scrog at roughly a 45degree angle with stadium-style angle to it so that I can pass to the rear of my room where my 4x5 veg/clone room is already located? I of course want to maximize my yield and quality while using 100% percent of my availible lighting Any suggestions?
Also materials already on hand: 3x1000 watt magnetic hps with XXL 6in. reflectors(hortiluxs). 1 EuroGrower( a 30"x4' drip/dwc system with 44gal resevoir) 4 30-gal DWC/totes with 4 6 inch net pots each(easily rigged for scrog). 1 55gal barrel for distilling my water and quickly filling resevoirs. Loads of hydro nutes, the entire General/Advanced Hydroponics and Humboldt lines . 1 Hannah Champ Ph Tester. 1 Bluelabs PPM/EC stick. Buttloads of hydroton and 20 lb block of coco coir. Multiple timers, surge protectors, and extension cords. 1 1500rpm squirrel cage fan not sure of CFM and 25 foot of the good stiff ducting no odor control as of yet. 1 unopened 50'x10ft roll of panda plastic and another used roll or mylar seeming to be about the same size as the panda plastic. And one window ac unit. All current materials purchased in a single transaction with a grand total of about $230 including gas. Craigslist. I think thus far I've done pretty well for a grow budget lol.
PLEASE HELP ME!
Also materials already on hand: 3x1000 watt magnetic hps with XXL 6in. reflectors(hortiluxs). 1 EuroGrower( a 30"x4' drip/dwc system with 44gal resevoir) 4 30-gal DWC/totes with 4 6 inch net pots each(easily rigged for scrog). 1 55gal barrel for distilling my water and quickly filling resevoirs. Loads of hydro nutes, the entire General/Advanced Hydroponics and Humboldt lines . 1 Hannah Champ Ph Tester. 1 Bluelabs PPM/EC stick. Buttloads of hydroton and 20 lb block of coco coir. Multiple timers, surge protectors, and extension cords. 1 1500rpm squirrel cage fan not sure of CFM and 25 foot of the good stiff ducting no odor control as of yet. 1 unopened 50'x10ft roll of panda plastic and another used roll or mylar seeming to be about the same size as the panda plastic. And one window ac unit. All current materials purchased in a single transaction with a grand total of about $230 including gas. Craigslist. I think thus far I've done pretty well for a grow budget lol.
PLEASE HELP ME!