yoda954
Well-Known Member
I thought I would share my recent projects with you guys. Thanks for all the good help and info here.
8x Cree CXB3590 CB 3000k
8x Chiploc COB Holders.
2x HLG-185-1400C Drivers
4x 7.28" x 20" Heatsinks
4x 200mm Hydro Dynamic PC fans
2x 100k Potentiometer (for dimming)
1 Wall wart to run fans.
Various, tape, thermal paste, zip ties and wire connecters...ect.
Space Coverage Im using it for: 4x2 tent.
COB Specs:
My light specs:
65,600 Lumen
About 400 Watts
390 (dissipation W) * .5167 (COB efficiency) = 202 PAR W
202 PAR W/8 ft² = 25 PAR W/ft²
25 * 10.7 (ft² in 1 m²) = 267.5 PAR W/m²
267.5 * 4.88 (umol/PAR W for CXA 3000K) = 1305 PPFD. (minus small % for lateral and upward scatter)
The light only gets slightly warm. Cooler than the top of a fridge.
Runs on 110 or 220 (I use 220)
The Pics:
The four center lights are on a different driver and dimmer. The 4 outer ones are also on their own. It keeps me from having to use the whole light to get one plant going. I can turn the outers up when it spreads out. Or just dim both sets down for vegging a whole area. There are quick disconnects going to the cobs so I can remove the fan and drivers from the top as a separate unit for maintenance. This is also why I dont have holes drilled into the frame for the dimmers.
Hello
What is your culture box ?
the fans are there a lot of noise?
Thank's you so much