CXB3590 1500W

[bassman999]

What about CD?

This is for the CXb3070, AFAIK BB still the top bin for them

 

[DarthBlazeAnthony]

I got thesehttp://www.amazon.com/10pcs-Linear-Taper-Rotary-Potentiometer/dp/B00X731QYG

They look good so I got these http://www.ebay.com/itm/231507476233
http://www.ebay.com/itm/231507476233

 

[bassman999]

They look good so I got these
http://www.ebay.com/itm/231507476233

Mine work so far and I wanted a knob

 

[Fastslappy]

bassman did u use the same exact item / pot ?
I can't tell a good one from a bad one

 

[BOBBY_G]

cant tell good pot?

havent heard that one around here

 

[DarthBlazeAnthony]

All systems go! I just paid this paypal Jerry emailed me.

 

[bassman999]

bassman did u use the same exact item / pot ?
I can't tell a good one from a bad one

Same one, and they are small in person, at least compared to the ones I use for tweeters and I wasnt expecting that.

 

[Fastslappy]

i'll the dimmers/switches after the fact ThanX Bassman

 

[bassman999]

i'll the dimmers/switches after the fact ThanX Bassman

 

[Fastslappy]

where did u mount that ?
have u soldered one yet ?

 

[bassman999]

where did u mount that ?
have u soldered one yet ?

Those drivers arent used yet, but I have a pair of 240's with these soldered to them.
I did them separately for more control

 

[DarthBlazeAnthony]

Incoming! Am I missing anything?

 

[DarthBlazeAnthony]

The heatsinks to accommodate (10) cxb3590's

 

[Airwalker16]

You may just wanna get 2.5&2.8 mm bits and M3 self tapping screws instead of actually tapping

 

[DarthBlazeAnthony]

The drivers. Fuck yes.

 

[DarthBlazeAnthony]

You may just wanna get 2.5&2.8 mm bits and M3 self tapping screws instead of actually tapping

why?

 

[Airwalker16]

why?

Aluminum is soft enough. It's a lot of extra work tapping the holes. You can if you want, but don't use an all in one like that. Use a 4-40 drill and tap set the drill is smaller than the actual tap and is made so it can work with threads. Those flat bottom screws are great if you have it tapped. But that's the only way they'll go in.
With m3 screws, using a 2.5 for pilot, then a 2.8 after gives your screws just enough width to "press" it's own threads.

 

[DarthBlazeAnthony]

Aluminum is soft enough. It's a lot of extra work tapping the holes. You can if you want, but don't use an all in one like that. Use a 4-40 drill and tap set the drill is smaller than the actual tap and is made so it can work with threads. Those flat bottom screws are great if you have it tapped. But that's the only way they'll go in.
With m3 screws, using a 2.5 for pilot, then a 2.8 after gives your screws just enough width to "press" it's own threads.

2.5-2.8mm? I already purchased the tap and center punch. I do not have metric size bits but I can purchase if you really think it is easier.

 

[bassman999]

The drivers. Fuck yes.
View attachment 3596242

I dont see any cobs

 

[REALSTYLES]

I dont see any cobs

He has the cobs coming Jerry always come through