Ohms Law ??? Can 62vdc become 145vdc ???

[BST]

I have a lpc 150-2450(31~62vdc) if ran parallel string of 4 lines @ 612.5 ma. Do you get 245vdc?

 

[nevergoodenuf]

In parallel voltage stays the same, but will also lower due to less overall power to each COB.

 

[Isawthelight]

I have a lpc 150-2450(31~62vdc) if ran parallel string of 4 lines @ 612.5 ma. Do you get 245vdc?

Your four parallel strings will measure no more than 62 vdc. BTW if only one diode or wire in a string breaks, the other three strings will carry 816 ma. Can your diodes carry this extra current?

 

[BST]

Your four parallel strings will measure no more than 62 vdc. BTW if only one diode or wire in a string breaks, the other three strings will carry 816 ma. Can your diodes carry this extra current?

So how many fv can each string handle? I ducked up and ordered a 2450 instead of 1400ma? To little time to much kush. I'm going to have order a cob to match. Any ideas?

 

[BST]

Luminous or lumaled I think makes a cob that might work well.

 

[Isawthelight]

So how many fv can each string handle? I ducked up and ordered a 2450 instead of 1400ma? To little time to much kush. I'm going to have order a cob to match. Any ideas?

Can you return that 2450? Most everybody are using cobs that are about 36 Vf.
http://www.cob-led.com/ceramic-COB-LED-source-sources-H-LCOB50.html has some cobs that run at 60-68 Vf Fifty Watters.

 

[BST]

Can you return that 2450? Most everybody are using cobs that are about 36 Vf.
http://www.cob-led.com/ceramic-COB-LED-source-sources-H-LCOB50.html has some cobs that run at 60-68 Vf Fifty Watters.

It cost $40 and to return cost $25 're-stocking fee, so…
Thanks for the help. So it would run 3 Vero 29 @ 800ma?(parallel)

 

[BST]

Parallel. I think I'm going to try to get as close to 150w and see what happens to a single

 

[Isawthelight]

Parallel. I think I'm going to try to get as close to 150w and see what happens to a single

3 vero 29 in parallel = 38.9 Vf (max) x 2.45 Amps = 94.57 watts. Putting more Vero 29 in parallel will not increase the watts to the plants but this will make each cob operate at a lower and more efficient temperature.

 

[BST]

3 vero 29 in parallel = 38.9 Vf (max) x 2.45 Amps = 94.57 watts. Putting more Vero 29 in parallel will not increase the watts to the plants but this will make each cob operate at a lower and more efficient temperature.

Yes but a lpc150-2450 is a cc driver. If a Vero 29 has 39Vf can ya run 3 on it. Lpc150-2450 vdc is 31~62. Does vdc stay the same???