LED Companies w/ LINKS

Greengenes707

Well-Known Member
Well what the hell is this then?



Don't see any yellow phosphor^^^^^^^ .............just monos

https://cdn.shopify.com/s/files/1/0774/5259/files/LSG_VIVIDGRO_V2_Grow_Fixture_Spec_Sheet_REV_C_08-2015.pdf?3077632721542304916

"wavelengths OF 450 and 660nm".........
That is a picture of a unit powered on, and they look like cool white too me. The SPD shows it too.
Where is the peak in the middle coming from?...the peak equal to the blue peak? Are they using greens too?...I think not.
Vivid-1.jpg

You don't see phosphor when lights are on, specially cool white.
IMG_3516.jpg
IMG_3515.jpg
 

PSUAGRO.

Well-Known Member
That is a picture of a unit powered on, and they look like cool white too me. The SPD shows it too.
Where is the peak in the middle coming from?...the peak equal to the blue peak? Are they using greens too?...I think not.
View attachment 3602564

You don't see phosphor when lights are on, specially cool white.
View attachment 3602562
View attachment 3602561
If those diodes in the vividgro v2 are cool white, then I need to get my eyes checked, seriously......they look really blue to me? Lol

Talking about the lack of phosphor in the lights off pic? Hard to tell though.......

I see the spd, and think they should word their description better IMO...that
small 500-600 bump confirms your right, didn't catch it the first time.


I'm always first to point out my mistakes, but that picture and description leave allot to be desired..........thanks for the info gg

Let's go Broncos!
 
Last edited:

The Dawg

Well-Known Member
If those diodes in the vividgro v2 are cool white, then I need to get my eyes checked, seriously......they look really blue to me? Lol

Talking about the lack of phosphor in the lights off pic? Hard to tell though.......

I see the spd, and think they should word their description better IMO...that
small 500-600 bump confirms your right, didn't catch it the first time.


I'm always first to point out my mistakes, but that picture and description leave allot to be desired..........thanks for the info gg

Let's go Broncos!
:finger:Fuck The Donkeys:finger:. And The Dress Was Gold :hump:
 

FranJan

Well-Known Member
@PSUAGRO. , @Greengenes707

"CCT - 3R1W (2500k)"
3 red to 1 white???? It is a 3:1 panel. Could it be a 7000K+ white which is basically a blue pump with additional blue phosphor which might explain the blueness of it???? IDK at 65 degree beam angles and 64 lbs she's nothing but trouble :). "Proprietary VividGro" indeed :oops:!

Plus that's not a typical spectrum chart they're using is it :confused:?

Anyway they announced these back in July. Maaaan LOL, LED companies, none of them with the exception of maybe CREE, can release shit when they say they're gonna. Hello Luminus Horti diodes that were supposed to be released last month :roll:. Anyhoo I think it's a high K blue like the 12,000K "white" I used to use.
http://www.businesswire.com/news/home/20150723006279/en/

The VividGro™ V2’s performance-engineered, broad color spectrum can significantly stimulate plant growth while drastically reducing energy consumption by utilizing specific lighting wavelengths - at 450 and 660 nanometers. The V2 Fixture has a rated life of 60,000 hours (L70), far longer than conventional high-pressure sodium (HPS) or other HID lamps, and significantly more than the life of many competing LED fixtures. Since VividGro™ V2 uses only 588 watts, far less energy than standard HPS fixtures, which typically use 1000 watts, the energy savings are dramatic. LSG’s unique design delivers optimal photosynthetic active radiation of 1081 umol/sec at center beam and fixture efficiency at 1.838 umol/J. The VividGro™ V2 fixture has an “instant on” feature, can be cycled to maximize healthy plant growth and employs passive cooling, making it completely silent. The V2 fixture is IP65 rated for safe operation in wet and damp environments, and is also backed by a 5-year limited warranty to ensure trouble-free performance.
 

doctorflux

Well-Known Member
Am I sure Now? No...... lol, if you follow Dr flux link above its a mono panel, maybe shit has changed since
I could have sworn I saw a different SPD indicating lots of blue and lots of red when I originally posted this, but I was probably just imagining things.

I visited an LSG factory back in 2007 or so and have never seen an LED company as obsessed with quality control. This was back in the early days of high power LEDs when they were making their high power engines which were something of a precursor to COBs.
 

Swiller

Well-Known Member
One half of my A51 lamp just took a shit on me, it lasted 6 months, o well. The other two hanging in there.
 

PSUAGRO.

Well-Known Member
I could have sworn I saw a different SPD indicating lots of blue and lots of red when I originally posted this, but I was probably just imagining things.

I visited an LSG factory back in 2007 or so and have never seen an LED company as obsessed with quality control. This was back in the early days of high power LEDs when they were making their high power engines which were something of a precursor to COBs.
foolishly thought the same, I just figured this was V2(higher wattage, updated osram ssl 80?) of the LSG R/B that Bugbee tested back in the day, which gave a higher umol/j than their R/W fixture?<<don't quote me on this;)..............spd's generally don't lie though, except if your philips.....lol..............GG's right on this being a R/W fixture until I get an email back from them( i had to, it's just my nature)

One half of my A51 lamp just took a shit on me, it lasted 6 months, o well. The other two hanging in there.

Sounds like a driver issue(RW?), a51 will take care of it.........you should check if any connections are loose inside first , could also switch the quick connects from the working side to confirm it's the driver....
 
Last edited:

PSUAGRO.

Well-Known Member
Nextlight aka " the birdhouse :wink:" new commercial fixture is about to drop:



passive cooled, dual channel dimming, using samsung lm561b(?) 3000k/5000k............. should toss the 5000k imo, waiting on ul approval.

A mini and veg (2x4) ver. should be out this month...........or not
 

kmog33

Well-Known Member
Nextlight aka " the birdhouse :wink:" new commercial fixture is about to drop:



passive cooled, dual channel dimming, using samsung lm561b(?) 3000k/5000k............. should toss the 5000k imo, waiting on ul approval.

A mini and veg (2x4) ver. should be out this month...........or not
I really like the low profile on it. Looks sweet, and bright.


Sent from my iPhone using Tapatalk
 

Hybridway

Well-Known Member
all the pro grows have LOUD FANS its there only flaw imo , u will need to build a muffler box simple one outta cardboard an insulating tape works great unless you like the sound of high pitch mini jets engines in your room/tent i own a PG400 (flower) an a PG260 (veg) as well as a 300w diamond series (flower) custom made by eshine with my improved spectrum the diamond series comes with 2 x140mm whisper quiet fans low rpm great cooling near zero noise the PG400 comes with 6 an the PG260 3 90mm crazy noisey fans that will drive you nuts now if i could get progrows with these fans 140mm fans they would be the clear top of the pack of the current avalible brands
You like your Pro-Grows? I just bought the new X5-500. Waiting on it now. Wish me luck cuz I hear mixed reviews. But the bad ones don't really seem to own them when the good reviews do. So, that should tell me something. Doing a journal with it. Stay tuned. Also a Amare SE-450. And the SunCloak vertical system. Should be fun! Come see.
 

AquariusPanta

Well-Known Member
Nextlight aka " the birdhouse :wink:" new commercial fixture is about to drop:



passive cooled, dual channel dimming, using samsung lm561b(?) 3000k/5000k............. should toss the 5000k imo, waiting on ul approval.

A mini and veg (2x4) ver. should be out this month...........or not
1400 PPF would be impressive for a consumption of only ~650W, although I see no data backing this claim. I wonder if they will be using optics or not, as that sort of makes an impact on how well tiny leds perform with respect to the garden.

Did anyone else picture Randy from Trailer Park Boys towards the last five seconds of the clip?

 

PSUAGRO.

Well-Known Member
1400 PPF would be impressive for a consumption of only ~650W, although I see no data backing this claim. I wonder if they will be using optics or not, as that sort of makes an impact on how well tiny leds perform with respect to the garden.

Did anyone else picture Randy from Trailer Park Boys towards the last five seconds of the clip?


Mega's 1400 ppf # is straight out of an integrating sphere..........NOT flat pane measurement and averaging that shit like you see allot around here==== as @guod said lots of "disney math" going on. PAR map should be available in the next couple of weeks, fixture is still pending approval.

Gavita did 1700ppf on the same ul listed power supply(1150w/1.5ppf/w)

no secondary lenses or reflectors, using just the primary samsung optic(which is a UL sealed device)......it's damp location rated, can be ip66 (conformal coating)on request.

Nick is one of the smartest guys I know in the industry, he is willing to test your mothership or most efficient fixture in the sphere and see how it compares=== if you send it to him:wink:
 

FranJan

Well-Known Member
Mega's 1400 ppf # is straight out of an integrating sphere..........NOT flat pane measurement and averaging that shit like you see allot around here==== as @guod said lots of "disney math" going on. PAR map should be available in the next couple of weeks, fixture is still pending approval.

Gavita did 1700ppf on the same ul listed power supply(1150w/1.5ppf/w)

no secondary lenses or reflectors, using just the primary samsung optic(which is a UL sealed device)......it's damp location rated, can be ip66 (conformal coating)on request.

Nick is one of the smartest guys I know in the industry, he is willing to test your mothership or most efficient fixture in the sphere and see how it compares=== if you send it to him:wink:
More mid power based lights rocking the sphere 8). Wish they weren't so tough for the average Joe to assemble, too much work IMO or you're stuck using prefabbed stuff for too much $$$ but seeing those numbers really makes me lean to using smaller CREE COBS in clusters of 4 or 5 to replace the Illumitex based DIY I use to beat the shit out of my plants with :). Still I'm soooooo sick of the words "120 degrees" on COB/CSP/Medium SMD. Is 80 that tough?????

These PSU?
http://www.ledsmagazine.com/ugc/2016/02/01/samsung-lm561b-packaged-led-offers-higher-quality-light-color-for-premium-luminaires.html



Also, anyone heard of these???? Soooo many products coming out. Can't keep up really.

Following the eagerly anticipated launch of a new LED product line by parent company Hortilux Schréder in Europe, PL Light Systems will soon be releasing the HortiLED products in North America as well.

 

TheStickiest

Active Member
I need a light for my 2x2 Veg tent, I have a budget of $200. This tent will be mainly for rooting a few clones and vegging one plant to a decent size before its moved into my larger tent, this will be sort of a temporary set up until I acquire more room in the near future.

The tent will have some air cooling but not enough to run a metal-halide in my opinion.

I plan to buy a quality light or build my own in the future but now is not a good time..

Can anyone recommend the "best" LED light for $200 or under? I'm aware its most likely going to be a piece of crap and not last very long.. But hey that's what cheap products do, Oh also I've seen the Area 51's on this site and although they are nice, I cant wait a month I need this light ASAP. Thank you.
 

puffenuff

Well-Known Member
I need a light for my 2x2 Veg tent, I have a budget of $200. This tent will be mainly for rooting a few clones and vegging one plant to a decent size before its moved into my larger tent, this will be sort of a temporary set up until I acquire more room in the near future.

The tent will have some air cooling but not enough to run a metal-halide in my opinion.

I plan to buy a quality light or build my own in the future but now is not a good time..

Can anyone recommend the "best" LED light for $200 or under? I'm aware its most likely going to be a piece of crap and not last very long.. But hey that's what cheap products do, Oh also I've seen the Area 51's on this site and although they are nice, I cant wait a month I need this light ASAP. Thank you.
If you can't wait for a quality LED, and have your heart set on only LEDs, then Mars Hydro is probably your best bet given your price limit. They have a bad rep around here for being unreliable but if they don't break they can veg great.

I was just looking at veg lights on Amazon and honestly, for a $100 or less you can go with a couple 2ft T-5s or a 250w CFL. They'll do a great job as well.

Good luck
 

TheStickiest

Active Member
If you can't wait for a quality LED, and have your heart set on only LEDs, then Mars Hydro is probably your best bet given your price limit. They have a bad rep around here for being unreliable but if they don't break they can veg great.

I was just looking at veg lights on Amazon and honestly, for a $100 or less you can go with a couple 2ft T-5s or a 250w CFL. They'll do a great job as well.

Good luck
Can't say I'm stuck on LED but I have really been wanting to try it.

Just curious out of the three options LED, T5, CFL for $200 or under in a 2x2 tent which option would potentially provide the best veg results? I would probably base my decision off of that..

Although I was thinking that if this LED light lives beyond a few months it could be re-purposed by going into my flower tent with my HPS light.
 
Top