Should I start flushing??

Bubblegum31

Well-Known Member
Hallo guys.

In 2 days time those 4 ladys will be exactly 8 weeks in flower.

Should I start flushing and chop by week 9?

Feeding is still 1.8 ec

Ph 5.9/6.2

1x fruit spirit RQS 8 weeks strain
2x Bubblegum RQS 8 weeks strain
1x somango RQS 8-9 weeks strain

DSC_0042.JPG DSC_0043.JPG DSC_0044.JPG DSC_0045.JPG

Thanks in advance guys.

Bubble :leaf:
 

Bubblegum31

Well-Known Member
Well!!!

Started with canna nuts flipped to H&G nuts then using plagron now :)

Silica protekt
A&b whats above
H&G roots exaculator stoped after stretch
Earth juice catalyst
Aptus calmag
Flavorful humboldt nuts
Canna zym

Thats it :weed:
 
Last edited:

astronautrob

Well-Known Member
I'd scope the trichs and if you got cloudy/amber 100% I'd chop, but I also don't flush or use hardly as many nutes. If they're ready they're ready though imo, if not I'd start tapering down the nutes at least in preparation of them being ready
 

THE KONASSURE

Well-Known Member
getting down to personally choice now

but I`d aspirin and sugar them then give them sugar for 1 to 2 weeks, or if I was not in a rush I`d spray them with triacontanol and feed them pk/sugar for 1 to 2 weeks then give just sugar for 10 to 20 days, let the plant burn up all them nice big leaves you`ve left on them
 

Bubblegum31

Well-Known Member
I'd scope the trichs and if you got cloudy/amber 100% I'd chop, but I also don't flush or use hardly as many nutes. If they're ready they're ready though imo, if not I'd start tapering down the nutes at least in preparation of them being ready
I have 10x microscope, i see the mashrooms yes however the colour is not really obvious to me.

Me and my gf tryed so hard to see with the microscope but we both have no idea :D!
 

Bubblegum31

Well-Known Member
getting down to personally choice now

but I`d aspirin and sugar them then give them sugar for 1 to 2 weeks, or if I was not in a rush I`d spray them with triacontanol and feed them pk/sugar for 1 to 2 weeks then give just sugar for 10 to 20 days, let the plant burn up all them nice big leaves you`ve left on them
I am sorry but, can I know what is the idea behind the aspirin now?

Also what do you mean by sugar?

I believe that earth juice contains molases which I use at the moment.

Also how can I buy triacontanol?

Which proudcts contain this active ingredients knowen that I live in europe.

Thanks alot
 

Bubblegum31

Well-Known Member
Also any idea about the waight.

I know its early however can any experienced eye give a guessing?!!

Thanks alot for all of you guys..
 

THE KONASSURE

Well-Known Member
I am sorry but, can I know what is the idea behind the aspirin now?

Also what do you mean by sugar?

I believe that earth juice contains molases which I use at the moment.

Also how can I buy triacontanol?

Which proudcts contain this active ingredients knowen that I live in europe.

Thanks alot

Triacontanol you can buy on ebay and dilute with alcohol then mix with water but its also in seaweed and alfalfa

Molasses can be expensive so when I flush I normally just buy dextrose or glucose powder and mix that up at 500 to 2000ppm depends on the plants

Hard to say the plants are a little bit shorter than I`d do but they look good for 500g to 1kg per Meter sq, hard to know depends if your drying to 70% rh or 60 or 50

Oh and Aspirin can be used to harden buds or as a root stimulator, I like to use it before flush or on the 1st day of flush as it helps the plant draw sugars from its leaves into the buds
 

Bubblegum31

Well-Known Member
Triacontanol you can buy on ebay and dilute with alcohol then mix with water but its also in seaweed and alfalfa

Ill do my research soon on triacontanol, thanks for sharing.

I have a wetting product called coco-wet to use when I foliar spray

I have GH bio weed which is basically seeweed proudct, sometimes I foliar spray with it, and sometimes I use it with the nuts when I feed but I dont use it in flower just in veg as I heard that seaweed in not good in flowering ( not sure about that).

Do you think this is good proudct to use as alternative?!



Molasses can be expensive so when I flush I normally just buy dextrose or glucose powder and mix that up at 500 to 2000ppm depends on the plants

( will check that as well)


Hard to say the plants are a little bit shorter than I`d do but they look good for 500g to 1kg per Meter sq, hard to know depends if your drying to 70% rh or 60 or 50 ( which percentage you suggest for drying??)))

My dehumidifier is set on 45% at the moment

The only thing I hate about a dehumidifier that it generate heat which equal to one more lamp or something :s

Sometimes I just use it when the lights are off as the lamps drops the humidity quite a bit.

And i dont know how u think they are small!!

They look like 4 trees to me :)

I have those on 2x 600w at the moment

Oh and Aspirin can be used to harden buds or as a root stimulator, I like to use it before flush or on the 1st day of flush as it helps the plant draw sugars from its leaves into the buds( will check that as well. I heard aspirin is good if you are fighting infection or with bugs but not when flushing ( will check in that))
 

Bubblegum31

Well-Known Member
I just toke alook and indeed they look alot short just bcz I made the pics from above

Will try to post some more tomorrow..

Cheers
 

THE KONASSURE

Well-Known Member
Oh I mean how dry your going to get your buds when you dry/cure them that obviously effects the weight

Hmm yeah I like 60% humidity later in flower over that I start to worry about the buds rotting

Coco-wet is a wetting agent it reduces the surface tension of the water and allows it to spread out more, it also can kill bugs, its always best to use a wetting agent when foliar feeding or watering helps the water get absorbed better

I like to use seaweed products during flower they work best up until about 4 weeks before you finish, the problem is that seaweed extracts encourage a lot of new growth and fresh white hairs, fine if you like a nice mix of fresh and old in your buds but if you like them to be uniform and the same level of ripeness then it can annoy some people who try to get it all looking the same and such, if you know what I mean ?

but Bio weed and Bio marine should work fine in flower

Maybe next time carry on feeding bio weed to one plant and see how it does compared to the others, just add the bio weed along with whatever else your feeding the rest, if that plant seems to grow better for you then do all of the or half of all of them next time and so on
 

Bubblegum31

Well-Known Member
Oh I mean how dry your going to get your buds when you dry/cure them that obviously effects the weight

Hmm yeah I like 60% humidity later in flower over that I start to worry about the buds rotting

Coco-wet is a wetting agent it reduces the surface tension of the water and allows it to spread out more, it also can kill bugs, its always best to use a wetting agent when foliar feeding or watering helps the water get absorbed better

I like to use seaweed products during flower they work best up until about 4 weeks before you finish, the problem is that seaweed extracts encourage a lot of new growth and fresh white hairs, fine if you like a nice mix of fresh and old in your buds but if you like them to be uniform and the same level of ripeness then it can annoy some people who try to get it all looking the same and such, if you know what I mean ?

but Bio weed and Bio marine should work fine in flower

Maybe next time carry on feeding bio weed to one plant and see how it does compared to the others, just add the bio weed along with whatever else your feeding the rest, if that plant seems to grow better for you then do all of the or half of all of them next time and so on

I like to keep humidity around 60/65% during veg and stretch.

But dont you think that 60% in late flower is alittle bit high??!

Also coco-wet with nuts or water for roots feed this is very new information to me!!!!!
 

THE KONASSURE

Well-Known Member
I like to keep humidity around 60/65% during veg and stretch.

But dont you think that 60% in late flower is alittle bit high??!

Also coco-wet with nuts or water for roots feed this is very new information to me!!!!!
nah up to 60% is fine when it starts getting towards 70% then I start to worry and will up the air flow and normally water a bit less

but I like 3/3 for my day cycles, 3 days of more wetter humid conditions and 3 days where its drier, spider mites love it dry and rot loves it damp so changing it up can keep them both at bay, obviously you have to do what makes the strains your running happy too.

Yeah any wetting agent is great to use when watering it really helps the water soak in, makes water take less time and such, I was shocked the difference wetting agent makes, and I know a lot of growers that don`t use it and have started and been like "wow all these years I was making myself work harder" lol

Only time you can`t use wetting agents is when your using airstones because it makes it bubble like a bubble bath, wetting agent is normally just some kind of soap, infact some people even use dish soap instead but you can get some nice agents with plant extracts and such in them

That foamy water and all them bubbles means your water has more air in it too root like air

Yep I find 1ml to 5ml of wetting agent per L works in any feed or watering and its a must for when your soaking coco blocks otherwise you have to wait longer for them to expand
 

astronautrob

Well-Known Member
I have 10x microscope, i see the mashrooms yes however the colour is not really obvious to me.

Me and my gf tryed so hard to see with the microscope but we both have no idea :D!
Yea it is really difficult at times. If you have the extra cash I'd grab one of these guys, http://www.amazon.com/Supereyes-B005-Microscope-Endoscope-Magnifier/dp/B0066HA1PU/ref=sr_1_1?ie=UTF8&qid=1455373320&sr=8-1&keywords=supereyes , makes it a whole lot easier. Either way those are some nice looking girls there, be a shame to chop them early because you can't see the trichs
 
Top