companys here on the forumAlso if someone could just steer me in the right direction I'm looking to spend roughly $500-$700 for an LED for my 4x4 tent any advice is greatly appreciated
long time no see , taking care of that ass..................start here:Sup dudes? Peep datayass! What are the best turnkey Cobb systems available now? Don't have time to build one
unlikely you will have voltage drop over 10ft, what gauge wire do you use?Hey guys,
I just have a quick question. I just received my drivers with chinese cobs. My cxb3590's are en route. I just wanted to wire up my drivers with the cheap cobs to be sure everything worked. One of the cobs was kind of flashing...on for a second, off for two seconds, on for one second, off for two. The other cob worked as it was supposed to. I tried the other cob on both drivers and it worked fine. Which leads me to believe the single cob is fried or just shotty workmanship? I just want to make sure I'm not going to bugger up a CXB when they arrive. My driver specs are 25-40v, @ 1500ma. I'm only going to use 2 cxb3590, each ran with it's own driver.
The length of wire from my driver to cob is about 10 feet. Would this cause voltage drop to the point that the driver would struggle to keep it lit?
The problem is that driver can only run 1 CXB3590 36v COBHey guys,
I just have a quick question. I just received my drivers with chinese cobs. My cxb3590's are en route. I just wanted to wire up my drivers with the cheap cobs to be sure everything worked. One of the cobs was kind of flashing...on for a second, off for two seconds, on for one second, off for two. The other cob worked as it was supposed to. I tried the other cob on both drivers and it worked fine. Which leads me to believe the single cob is fried or just shotty workmanship? I just want to make sure I'm not going to bugger up a CXB when they arrive. My driver specs are 25-40v, @ 1500ma. I'm only going to use 2 cxb3590, each ran with it's own driver.
The length of wire from my driver to cob is about 10 feet. Would this cause voltage drop to the point that the driver would struggle to keep it lit?
The 72v COB won't work at allThe problem is that driver can only run 1 CXB3590 36v COB
I'm just saying, those Mars Hydros aren't completely bunk, either. I have seen grows around here that yielded good stuff. Compare reviews on Amazon.he's just being honest bro... That's an HID budget. The cheap LEDs are like tattoos. Good tattoos aren't cheap, cheap tattoos aren't good. $650 minimum, don't waste your 3
Lower it a bit.I like my galaxyhydro!! I plan on getting two more.
Is this a proper height? I read you wanna keep it around 18in. Mine is currently around 15in from the tops of my plants.
http://s1187.photobucket.com/user/2005SE-R_ALTIMA/media/IMG_17241.jpg.html
Ok so keep it 9-10in from the plant tops? I just feel like they should be taller. My plants are short and thick lolLike, 4-6 inches.
That's what she said...9-12 inches should do.