Canna coco

Phytium hater

Well-Known Member
Fuck man thats some serious yields...Dam I have Newer pulled numbers like that so like 900 grams of dried product per plant...
What size of HPS you are using and how many, do you use Co2,....how do you do it...other people get like 3-4 oz/ per plant..
I think with a 7 weeks of veg in hydroponics with Moby Dick I pulled per plant 4 oz,12 plants that came up to 1300 grams and the lights was 2 x 600 w HPS so it was more than 1 gram/watt ...no Co2 or any mini split AC ......
That plant look like the pure form of the alien dna in the movie Species, when they try it in the lab.sSW_tiegas.gif
How the Hell does your plant mutate to pure lumps of bud like that....
 
Last edited:

Phytium hater

Well-Known Member
sorry couldn't resist lol, some old footage of xxl indoor plants. i got near 2lb from one plant in this set up.

Those are serious trees , they must have been vegged like 4 months before flowering....? Impressive, but the overall time from seed to ready product must be close to 6 months when the size is that huge...
 

bryangtho

Well-Known Member
Fuck man thats some serious yields...Dam I have Newer pulled numbers like that so like 900 grams of dried product per plant...
What size of HPS you are using and how many, do you use Co2,....how do you do it...other people get like 3-4 oz/ per plant..
I think with a 7 weeks of veg in hydroponics with Moby Dick I pulled per plant 4 oz,12 plants that came up to 1300 grams and the lights was 2 x 600 w HPS so it was more than 1 gram/watt ...no Co2 or any mini split AC ......
That plant look like the pure form of the alien dna in the movie Species, when they try it in the lab.View attachment 3683905
How the Hell does your plant mutate to pure lumps of bud like that....
I start of on the flowering with 6x600 hps and when they are 3 weeks in to flowering I add 3 more 600 hps.
I veg for 4 may be 5 weeks at the most no AC no co2 just lots of air. I run 4x10 inch fans
 

Phytium hater

Well-Known Member
Well it comforts me a bit that I have only 4 x 600 hps in usage so can't really hit those margins, but anyway I think I did veg long enough but the ones in Wilmas are like maybe only 70-80 cm high and they where planted from seed 15.3 and from the same batch there is 3 which I hand water in same space and also they are in same 5 gallon pots ,but they are pathetic small no bushy ,no thick stem just look skinny,,,and the primary ones in Wilmas are nothing to brag about ether..I have a lot to learn...
next I go back to hydro...
 

Phytium hater

Well-Known Member
But still I am wondering that anyway the light per/square meter can not really be any more than 600 w Hps in your case ether...the light ain't really fitting much closer...and your veg time isn't that long..growing media same, nutes same ,lights same....how the heck do they expand like that in that time frame...?
 

420producer

Well-Known Member
thttp://www.canna-uk. Contact them see if they can point you in the right direction, as i said i made a mistake using this as im not Hydro but the only problem ive run into is roots want to get to the bottom of the pot as fast as they can but yeah they're looking good so far.
ill just make my own .i have a bunch of hydroton left . and found a spot outside for.. get this ... urban guerilla grow... 2016 hid these fuckers in damn near plain sight...in trees. on a hidden fence line .in a back ally. and dug a hole in some tall grass along a hiking trail i take the dog.on. they only in 3 and 5 gal.so dont expect much. if they found.?? lucky them .if not about a pound for me...
 

bryangtho

Well-Known Member
I think its air supply that make a big different. I just checked the weight of the 91 krypt witch was my best plant. It whet 1149 grams and one of the nicest smoke
 

Phytium hater

Well-Known Member
I have premium air supply, TD-Silent 350cfm intake without restrictions and 2 x TD-Silent 800 cfm out take ...so the air is moving...and the inside air temps are like 25,6 celcius/77,9 fahrenheit ...so why are my plants yielding with the same growing time same light ,same nutes 10 x smaller yields...THIS is what I try to understand....can you Bryangtho enlighten me ...I am small child lost in the woods..
 

bryangtho

Well-Known Member
I have premium air supply, TD-Silent 350cfm intake without restrictions and 2 x TD-Silent 800 cfm out take ...so the air is moving...and the inside air temps are like 25,6 celcius/77,9 fahrenheit ...so why are my plants yielding with the same growing time same light ,same nutes 10 x smaller yields...THIS is what I try to understand....can you Bryangtho enlighten me ...I am small child lost in the woods..
Lol very good I not sure. I do use a very old nutrient it made for my local hydro shop when I say that they have about 50 stores.
Its called Superior blend I have been using it for years. Its good gear I have tried a lot of different cem but I all ways go back to it and its cheap
 

Phytium hater

Well-Known Member
Well I learned all ready that its not the nute brand, its the growing environment...but..but my strain is good (same as yours), lights ,size of the grow room height 2,2 meters size 2,4 x2,4 meters ...so explain my missing link to 10 x bigger yields....so now I have like 4 plants per light =16 plants + I have 3 extras same pots same plants, so what do you do to get them to yield like that,,,serious pruning ,topping ,fimming ,lst, super cropping....?
 

bryangtho

Well-Known Member
No pruning no topping I do use a lot bigger pot then you my are 50 litres
My room runs at a very stable temp I don't let it get under 19
Here is set up or what's left of it. Its a bit of a mess DSC00921.JPG DSC00922.JPG
 
Last edited:

Phytium hater

Well-Known Member
you reckon that the circular drippers make a difference in 5 gallon pots. Now I am only using the blue pointy ones pushed in to the media..
If no pruning..why don't they grow like Christmas tree top shape, other people need to seriously manipulate their plants to get them do that..and lst them at least,,what about defoliating technique..do you do that....you must live in some weird cannabis energy field..
like Bermudas triangle, in this case not for sinking ships but for growing massive yields of cannabis.,..maybe if you move you realize that you get same shitty yields as we do,,(probably not )...
Do you understand that NO BODY without Co2 ,mini split AC and computer directed atmosphere ,
6 months of veg time...pull yields like that in that time frame..!!!
Remo and hes buddy's do grow some serious trees,,but you yield probably same amount in much lesser time and smaller plants,,,,I would really be interested in step by step detailed grow secrets to get anywhere towards that kind of a yields..
 
Last edited:

bryangtho

Well-Known Member
I have been growing for 25 years that room I have set it up just for flowering. It can be used for veg but its not that good
The ring feeder I make them my self I have them set on a timer. For each feed is for one minute the 6 pots will get 20 litres 3 feeds a day so that's 60 litres a day
Yes it is a great place to grow it can get very hot over summer. That's why I have such big fans there is 4 of them at 1019 cfm each
 
Last edited:

Phytium hater

Well-Known Member
Start a Cannabis Paradise site for grow enthusiast . With that knowledge the site will get a lot of followers and with that traffic your advertising space/ or even online grow products and guides will gain some serious value fast...you know how many growers around the world are seeking for know how like that...like I said people get 3-4 oz per plant even with 5-6 week veg..



And the ring feeders, do you use a mini drill to make holes...
 

Phytium hater

Well-Known Member
How do you guys use PK 13/14 by the way...I'we heard to use it in flowering the first 3 weeks like for a week, then in the middle of the flower and second boost for a week or so and then after a flush still only PK with water just 2 weeks before harvest...
I been using it by the Canna recommendations for 10 days 3 weeks before harvest and by Hesi using pretty much from the first 2 weeks to the nearly the end.....
any difference with AN Hammerhead results ?
 

Abucks

Well-Known Member
I started with pk at 1/2 strength on day one of week 4. Slowly raised it to full strength over a week, then full strength through week 5, and slowly dropping back down to 1/2 strength through week six. Seemed to work well for this crop.
 
Top