buck50crew
Active Member
this is my first time growing, i have done all my research and have benn planning and building for months now.
my grow area is ruffly 6.5' T 5' D and 9.5' W. i have 4.5' of verticle grow room before the plants hit the light.
im using a 1000w air cooled hps/mh lamp with convertable ballast, a 2' carbon filter, a 465 cfm squirl fan, and a duct mufller, then i run the duct into a duct booster fan right into my 1000w lamp and out the room.
i am supplying the room with fresh air through a portable air conditioner which im able to maintain an average of about 75 degrees in the room, i also use a 400 cfm inline fan to bring in resh air if the temp rises above 85.
i am also using co2 injection controlled by my sentinel climate controlller, this also controlls my inline fan if the temp gets to hot.
i plan on using epanded clay pellets as my grow medium but i also have rockwool slabs to fit my trays along with 6 by 6 cubes and starter cubes if this is preferable.
my pots are 9"T and 7.5"W 24 pots in all, is this big enough, i plan on using the scrog technique, all my driplines are set and i have a 115 gallon res with a pump to feed my drippers and some iarstones with pump to give them oxygen.
i also plan on going with sensi 2+ program with all the additives,
What Am i Missing!!??!!!???
will this work?
any feedback much appreciated
my grow area is ruffly 6.5' T 5' D and 9.5' W. i have 4.5' of verticle grow room before the plants hit the light.
im using a 1000w air cooled hps/mh lamp with convertable ballast, a 2' carbon filter, a 465 cfm squirl fan, and a duct mufller, then i run the duct into a duct booster fan right into my 1000w lamp and out the room.
i am supplying the room with fresh air through a portable air conditioner which im able to maintain an average of about 75 degrees in the room, i also use a 400 cfm inline fan to bring in resh air if the temp rises above 85.
i am also using co2 injection controlled by my sentinel climate controlller, this also controlls my inline fan if the temp gets to hot.
i plan on using epanded clay pellets as my grow medium but i also have rockwool slabs to fit my trays along with 6 by 6 cubes and starter cubes if this is preferable.
my pots are 9"T and 7.5"W 24 pots in all, is this big enough, i plan on using the scrog technique, all my driplines are set and i have a 115 gallon res with a pump to feed my drippers and some iarstones with pump to give them oxygen.
i also plan on going with sensi 2+ program with all the additives,
What Am i Missing!!??!!!???
will this work?
any feedback much appreciated
Attachments
-
80.6 KB Views: 30
-
66.2 KB Views: 21
-
65.9 KB Views: 18
-
74.2 KB Views: 20