Cutter Electronics: Complete DIY COB kits

[Growmau5]

Beautiful,but it looks like you have a arm and leg worth of 80/20. How much do you have in the frame work?

$24 for 6 x 48" 30mm sticks on clearance from firgelli automations.
$22 shipping
$70 in nuts & bolts from lowes.
$1060ish for the cutter kits
$90 in water jet fees.
$200+ for the monos LRS150 & Ldd
$45 for the typhoon controller

 

[Airwalker16]

i did

i see the monos above and below the wagos but cant make out the HSs youre talking about

See it now? It's laying on its side .

 

[captainmorgan]

$24 for 6 x 48" 30mm sticks on clearance from firgelli automations.
$22 shipping
$70 in nuts & bolts from lowes.
$1060ish for the cutter kits
$90 in water jet fees.
$200+ for the monos LRS150 & Ldd
$45 for the typhoon controller

$24 nice find,I really like the 80/20 stuff but it's pricey,do they have any stock still available on clearance? You should look for a fastener place near you to save on bolts and such. I have a fastener wholesaler near me that takes local walk-ins and it has saved me a ton of money.

 

[Airwalker16]

$24 nice find,I really like the 80/20 stuff but it's pricey,do they have any stock still available on clearance? You should look for a fastener place near you to save on bolts and such. I have a fastener wholesaler near me that takes local walk-ins and it has saved me a ton of money.

They have nothing left. I checked over a month ago. It was like a one time thing

 

[optzulu]

They have them from 1050ma to 4.2 amp
Cheers
Mark

Hello mark I have a question about the 1050ma version. How much 37.5watt cobs will it run ? 10 ore 11
I am shure it will run 10 becouse thats 375watt in total. But 11 makes 412.5watt in total so what you think?

 

[Airwalker16]

Hello mark I have a question about the 1050ma version. How much 37.5watt cobs will it run ? 10 ore 11
I am shure it will run 10 becouse thats 375watt in total. But 11 makes 412.5watt in total so what you think?

@Rahz would know for sure, but I think at that low of a current, fV goes down so I'm pretty sure you could run 11.

 

[BOBBY_G]

$24 nice find,I really like the 80/20 stuff but it's pricey,do they have any stock still available on clearance? You should look for a fastener place near you to save on bolts and such. I have a fastener wholesaler near me that takes local walk-ins and it has saved me a ton of money.

mcmaster.com has everything you need. the prices arent rock bottom but way better than custy big box stores and they have EVERYTHING and ship the same day

 

[Big smo]

when will these lights hit the market? What's the msrp?

 

[Rahz]

@Rahz would know for sure, but I think at that low of a current, fV goes down so I'm pretty sure you could run 11.

It's not listed in the PCT but Supra's charts indicate it should be about 33.8 The PCT gives slightly lower values so perhaps as low as 33.5

 

[Airwalker16]

It's not listed in the PCT but Supra's charts indicate it should be about 33.8 The PCT gives slightly lower values so perhaps as low as 33.5

So in other words, you can run 11 no problem

 

[Rahz]

So in other words, you can run 11 no problem

Yes, and if the pin sinks are being used a hex configuration isn't out of the question. 11 is a good number for a hex config.

O-O-O-O
-O-O-O-
O-O-O-O

 

[dro-man80]

@BOBBY_G doing this build revealed a shitload of tweaks that need to be made to the design file, so that you guys don't end up with the same headaches as I had. making little adjustments, filing grooves, etc. need a bit more time.
@Airwalker16 the monos are all cree xPe from Rapid LED. after buying them and then realizing they are not all top bin, I wish I would have gotten everything from Cutter. Rapid LED stocks some shit bins. for example, their Cree photo reds are grp13. the group 14 ones from cutter are 17% more output. I think, Mark?

And thanks to all for all of the compliments. Headed to the Bay Area for a week, starting tomorrow. This is as far as I can get with the build today. Ill be around-ish, on my phone. But for all intensive purposes, im on vacation :0

View attachment 3707413

oh yeah, I call this bracket system CANOPY

STATS:
6 X CXB3590 3500K
2 X CXB3590 4000K
2 X CXB3590 5000K (POSSIBLY SWITCHING TO 4000K)
20 X CREE XPE PHOTO RED 660NM
10 X CREE XPE RED 630-640NM
10 X SEMILED UVA CAN REMEMBER IF 365 OR 390NM
6 X EPISTAR FAR RED (TO BE SWITCHED OUT FOR CREE)
1 X GREEN LED FOR COOLNESS FACTOR.

wicked bro

 

[BOBBY_G]

when will these lights hit the market? What's the msrp?

everything you need to put it together is in that list so thats your msrp

 

[welight]

Hello mark I have a question about the 1050ma version. How much 37.5watt cobs will it run ? 10 ore 11
I am shure it will run 10 becouse thats 375watt in total. But 11 makes 412.5watt in total so what you think?

just checking with the factory on the 1050ma version so will clarify Volt op today but pretty sure 11 will work
Cheers
Mark

 

[welight]

just checking with the factory on the 1050ma version so will clarify Volt op today but pretty sure 11 will work
Cheers
Mark

Hello mark I have a question about the 1050ma version. How much 37.5watt cobs will it run ? 10 ore 11
I am shure it will run 10 becouse thats 375watt in total. But 11 makes 412.5watt in total so what you think?

ok Factory confirm voltage on 400 watt 1050ma will be 228 to 380, so 11 cobs no problem
Cheers
Mark

 

[JorgeGonzales]

It's not listed in the PCT but Supra's charts indicate it should be about 33.8 The PCT gives slightly lower values so perhaps as low as 33.5

+/-7%

 

[Forrestfirebuds]

@BOBBY_G doing this build revealed a shitload of tweaks that need to be made to the design file, so that you guys don't end up with the same headaches as I had. making little adjustments, filing grooves, etc. need a bit more time.
@Airwalker16 the monos are all cree xPe from Rapid LED. after buying them and then realizing they are not all top bin, I wish I would have gotten everything from Cutter. Rapid LED stocks some shit bins. for example, their Cree photo reds are grp13. the group 14 ones from cutter are 17% more output. I think, Mark?

And thanks to all for all of the compliments. Headed to the Bay Area for a week, starting tomorrow. This is as far as I can get with the build today. Ill be around-ish, on my phone. But for all intensive purposes, im on vacation :0

View attachment 3707413

oh yeah, I call this bracket system CANOPY

STATS:
6 X CXB3590 3500K
2 X CXB3590 4000K
2 X CXB3590 5000K (POSSIBLY SWITCHING TO 4000K)
20 X CREE XPE PHOTO RED 660NM
10 X CREE XPE RED 630-640NM
10 X SEMILED UVA CAN REMEMBER IF 365 OR 390NM
6 X EPISTAR FAR RED (TO BE SWITCHED OUT FOR CREE)
1 X GREEN LED FOR COOLNESS FACTOR.

This is awesome. Do you think it could cover a 4x6 area or 4x7 area if put on a lightrail? Also i know this is off subject but i just used 4parts water and 1 part hydrogen peroxide to kill off any fungus gnat larvae and using the sticky paper for the adults and i was wondering how long should i let that sit before a repopulate my coco with beneficial bacteria again? Thanks

 

[BOBBY_G]

h202 breaks down almost instantly its a strong oxidizer

 

[Forrestfirebuds]

h202 breaks down almost instantly its a strong oxidizer

Thank you very much. Thats great to know so i will repopulate my coco in the morning. Do you think hitting it once with the hydrogen peroxide and water mix will kill all the larvae? I have sticky paper for the adults too. Thanks

 

[Humble grower]

Nets all filled out and about a week into flower. Ladies are loving it already starting to show