What did you accomplish today?

tangerinegreen555

tangerinegreen555

Well-Known Member
Finished modified lay out of front porch...finally! Steps/wall permanently in place, still have to pack down patio surface...original, first draft, first draft with dry laid enclosure...and the final solution...

Original...needed work, obviously...
0610161138a-1-1.jpg

first draft...with narrow steps...ultimately rejected after looking at it a couple days...

0617161910a-1.jpg

put up dry laid enclosure to be certain I don't want it (rejected)
0627160820a-1-1-1.jpg


actually kinda OK...but wider steps are a must so...Rejected again and torn down...


The final solution...wide steps, open patio...no enclosure (it's just a front entrance, the back patio is where it's really happening)...and I wanted steps wide enough to have 2 people help the elderly (or intoxicated) visitors up and down...
0629161608a.jpg


Had to get a few more stone blocks...just $125 more...no contest at that minimal bump up...still have to pack down patio surface tomorrow...(pretty sure I won't change my mind again...Lol.)
 
Last edited:
WeedFreak78

WeedFreak78

Well-Known Member
tangerinegreen555 said:
Finished modified lay out of front porch...finally! Steps/wall permanently in place, still have to pack down patio surface...original, first draft, first draft with dry laid enclosure...and the final solution...

Original...needed work, obviously...
View attachment 3720459

first draft...with narrow steps...ultimately rejected after looking at it a couple days...

View attachment 3720461

put up dry laid enclosure to be certain I don't want it (rejected)

View attachment 3720462
actually kinda OK...but wider steps are a must so...Rejected again and torn down...

The final solution...wide steps, open patio...no enclosure (it's just a front entrance, the back patio is where it's really happening)...and I wanted steps wide enough to have 2 people help the elderly (or intoxicated) visitors up and down...

View attachment 3720463
Had to get a few more stone blocks...just $125 more...no contest at that minimal bump up...still have to pack down patio surface tomorrow...(pretty sure I won't change my mind again...Lol.)
Click to expand...
Wide steps are the way to go. Looks good.
 
Big_Lou

Big_Lou

Well-Known Member
tangerinegreen555 said:
Wife had hospital procedure today...situation seemed kinda shaky going in, but she came out couple hrs. later with all good news...
Dropped her off at her sister's last night...just 5 minute ride to hospital instead of 50 minute from our place...she insisted I stay home and take care of dogs...and take food to her horse...knew she was OK before 10AM...then did her routine...dogs and horses...horse stays at a barn 15 minutes away with several others...then brought wife home. Her Dr. says light duty rest of the week.

View attachment 3719759
horses like attention...back to the grind tomorrow.
Click to expand...
So glad to hear your wife is well.
 
tangerinegreen555

tangerinegreen555

Well-Known Member
Vibrating tamper machine fucked up (and I thought Subaru's never broke down), can't pack down front patio till we get a part...so started dry laying/leveling rear patio...
0630161602.jpg
blue Pennsylvania bluestone...(also have green Pa. bluestone and brownstone for tri-color courtyard for later)...0630161602b.jpg
Seems to go well with musket brown block...the fun stuff coming after this, bar and 2 planter walls and running electric lines through garage wall. Then the long awaited courtyard.
Got the ditch witch back for half a day, decided to french drain length of house and run under courtyard to meet up with storm drain near alley. Will plant something there to protect drain outlets. I know whatever goes there will grow big with heavy watering everytime it rains. Rhododendron grew massive at my place at end of the storm drain...0630161625a.jpg
window guys coming to hang new front door later...we tried hanging an interior door couple months ago...couldn't get it until we called in a favor from a contractor who we let use our dumpsters...he got it shimmed and level in 20 minutes...not trying that again, but I think we could do it now...maybe. Lol.
 
.Pinworm.

.Pinworm.

Well-Known Member
Spent all week in the fucking 6,000° heat, gutting this '56 Nomad. Every last wire, bolt, piece of trim, and I am completely spent. I can't wait to start slapping new pieces on it. I started my week off today. I'm gonna live it like I mean it. Tossed a bunch of 2 footers into 20gal bags on the porch, and got the grill going. Iced down my Frankenstein ice-chest, got some Anti-Heroes playing on the Hi-Fi. Let thirsty Thursday commence...
 
Cannacat

Cannacat

Well-Known Member
tangerinegreen555 said:
Vibrating tamper machine fucked up (and I thought Subaru's never broke down), can't pack down front patio till we get a part...so started dry laying/leveling rear patio...
View attachment 3721271
blue Pennsylvania bluestone...(also have green Pa. bluestone and brownstone for tri-color courtyard for later)...View attachment 3721282
Seems to go well with musket brown block...the fun stuff coming after this, bar and 2 planter walls and running electric lines through garage wall. Then the long awaited courtyard.
Got the ditch witch back for half a day, decided to french drain length of house and run under courtyard to meet up with storm drain near alley. Will plant something there to protect drain outlets. I know whatever goes there will grow big with heavy watering everytime it rains. Rhododendron grew massive at my place at end of the storm drain...View attachment 3721305
window guys coming to hang new front door later...we tried hanging an interior door couple months ago...couldn't get it until we called in a favor from a contractor who we let use our dumpsters...he got it shimmed and level in 20 minutes...not trying that again, but I think we could do it now...maybe. Lol.
Click to expand...
I can not wait to see the back when you get it finished, you've got the front done lovely and the wider steps were definitely the right choice. You've got me all nostalgic for watching my dad's projects when I was a kid; he built all our fireplaces and garages and everything himself, all sorts of things in beautiful stone and deep varnished wood. Then he got into woodwork in a big way, makes busts of cartoon characters, owls and jewelry boxes and stuff, really intricately carved, he's dead clever.... Anyway, thanks for the trip down memory lane :bigjoint:
 
tangerinegreen555

tangerinegreen555

Well-Known Member
Cannacat said:
I can not wait to see the back when you get it finished, you've got the front done lovely and the wider steps were definitely the right choice. You've got me all nostalgic for watching my dad's projects when I was a kid; he built all our fireplaces and garages and everything himself, all sorts of things in beautiful stone and deep varnished wood. Then he got into woodwork in a big way, makes busts of cartoon characters, owls and jewelry boxes and stuff, really intricately carved, he's dead clever.... Anyway, thanks for the trip down memory lane :bigjoint:
Click to expand...
I've been looking online for a couple gargoyles to put on planter walls...Lol.
See if I can find a couple cool ones that aren't too Stephen Kingish...
 
srh88

srh88

Well-Known Member
tangerinegreen555 said:
I've been looking online for a couple gargoyles to put on planter walls...Lol.
See if I can find a couple cool ones that aren't too Stephen Kingish...
Click to expand...
5e338655-e27a-4f00-bac5-be4694e93000.jpg
i got these guys sitting on my light post out front


someone dinged my work truck today, that dick head.. carpenter was carrying too many 2x4's and it slipped and went down the side of my door.. its small, but it makes me sad lol
217e935e-85c1-49c3-b337-1335fec1c27e.jpg
 
UncleBuck

UncleBuck

Well-Known Member
Screenshot 2016-06-30 at 8.50.45 PM.png

made this massive mirror for my wife's dressing room (which i am remodeling) today.

it's really super easy to do. i had three mirrors, one was 12x48x1/8, one was 42x63x1/4, and one was 14x37x1/8.

i took a piece of 4x8 plywood and sketched out exactly where the mirrors would go then glued them down. i had to fir up the two smaller mirrors with 1/8'' plywood so that they would be flush with the bigger one.

then i took the table saw and made some custom 1/4'' firring strips so that the trim would all sit flush as well. then i trimmed it out. the smallest mirror was 37'' across, which meant two 1x6s would work perfect for trimming the sides. i used 1x4s to trim the top and bottom.

then i cased out the sides so you can't see the plywood or firring strips and left a 1/4'' reveal proud of the trim.

i don't trust the glue at all and didn't like the seams where the mirrors were butting, so i cut a few strips to cover the butts, and then ripped down some scraps to 1/2''x1/2'' to use as butts. that left another nice 1/4'' reveal as well.

all the casing and butts were pre-drilled before nailing them on.

now i just gotta caulk the seams and paint.

and then do the rest of the punch list for finishing this little remodel.

you can see what i did two days ago,- the window. again, super easy stuff. it's a vinyl replacement, so all you have to do is remove the screws, cut the caulk line inside, go outside and cut the caulk lines out there, and pry it out. then you cut back the drywall to the corner bead and remove it all, especially that ugly stone sill that no one likes. @stone sill FUCK YOU!

fir up from the framing until your new sill will be flush with the brick exterior and go fabricate your new sill. set the window back on top of the sill, shim it until it is level plumb and square and screw it down again. then foam it in right away. the foam sets the window even better than the screws do.

go fabricate new jambs, shim them off the framing to give a perfect reveal on the window, and nail those down. fabricate the casing and nail that shit down too, 1/4 reveal all around is standard. caulk it all in, let the caulk dry, and paint it.

so easy a caveman can do it.
 
Big_Lou

Big_Lou

Well-Known Member
UncleBuck said:
View attachment 3721679

made this massive mirror for my wife's dressing room (which i am remodeling) today.

it's really super easy to do. i had three mirrors, one was 12x48x1/8, one was 42x63x1/4, and one was 14x37x1/8.

i took a piece of 4x8 plywood and sketched out exactly where the mirrors would go then glued them down. i had to fir up the two smaller mirrors with 1/8'' plywood so that they would be flush with the bigger one.

then i took the table saw and made some custom 1/4'' firring strips so that the trim would all sit flush as well. then i trimmed it out. the smallest mirror was 37'' across, which meant two 1x6s would work perfect for trimming the sides. i used 1x4s to trim the top and bottom.

then i cased out the sides so you can't see the plywood or firring strips and left a 1/4'' reveal proud of the trim.

i don't trust the glue at all and didn't like the seams where the mirrors were butting, so i cut a few strips to cover the butts, and then ripped down some scraps to 1/2''x1/2'' to use as butts. that left another nice 1/4'' reveal as well.

all the casing and butts were pre-drilled before nailing them on.

now i just gotta caulk the seams and paint.

and then do the rest of the punch list for finishing this little remodel.

you can see what i did two days ago,- the window. again, super easy stuff. it's a vinyl replacement, so all you have to do is remove the screws, cut the caulk line inside, go outside and cut the caulk lines out there, and pry it out. then you cut back the drywall to the corner bead and remove it all, especially that ugly stone sill that no one likes. @stone sill FUCK YOU!

fir up from the framing until your new sill will be flush with the brick exterior and go fabricate your new sill. set the window back on top of the sill, shim it until it is level plumb and square and screw it down again. then foam it in right away. the foam sets the window even better than the screws do.

go fabricate new jambs, shim them off the framing to give a perfect reveal on the window, and nail those down. fabricate the casing and nail that shit down too, 1/4 reveal all around is standard. caulk it all in, let the caulk dry, and paint it.

so easy a caveman can do it.
Click to expand...
I dig it, man....utilitarian and sturdy. Gooooood job. I honed in on the floor, hardwood not the fake vinyl stuff, eh? (My eyesight isn't the best.)
Nothing beats the quality stuff....this is nearly 70 years old, you just know it's seen some action, look at those scars and pockmarks.
:blsmoke:

IMG_1550.JPG

I want to strip the crappy paint from the door and the brass, but you get the idea....quality, man, quality....the sort of house that once served as a setting for endless haunted house flicks....

IMG_1552.JPG
 
You must log in or register to reply here.
Top