BM9AGS
Well-Known Member
Yeah....if I sold them I'd test them to make sure they work and not provide a warranty.
REALSTYLES 6th DIY CXA 3590 5000k DB bin
- Thread starter REALSTYLES
- Start date
REALSTYLES
Well-Known Member
Of course testing and will give major tech support on the build. Skype me I'm starting a group chat session and it's free if you have a mic for your computer and we can talk and you'll get to know who I am REAL TALK
Michael Huntherz
Well-Known Member
lol @ real talk
For realsies though. You should call him, have a chat, he's a nice and helpful fellow.
Michael Huntherz
Well-Known Member
@REALSTYLES I was out to lunch with my lady when you called, man.
FullCarve
Well-Known Member
HI,
the data sheet from Meanwell says the current range of HLG C1400 series is 700ma ~ 1400ma. If choose Type B and dim below 50% power??? is it possible so that it runs below 700ma?
Airwalker16
Well-Known Member
Exactly. O-100% or 0mA-1400mA.
FullCarve
Well-Known Member
oh WOW, thank you for the reply.
what if... what if....
the below composition is possible???
4 cob @1400mA = 8 cob @700mA = 16 cob @ 350mA
then the 350mA with 16 cobs.... the photons more than 700mA???
i assume 700mA would be 60% efficiency around.... then 350mA .. higher than 60%??
thank you for reply in advance
redzi
Well-Known Member
I bought the Mean Well HLG 320H-36B for just over $100...turns out it is constant on the voltage side which requires me to use all 4 connects of the cob holder for cxb3590...except for the last one. So a few extra feet of wire and some pissed off moments when I wired it as voltage through the cob. No big deal in long run because the wires will be inside a 6 inch duct for my carbon scrubber, while using heat sinks from some old servers. The copper is good at getting heat from point A to point B and the aluminum is good at heat dissipation ...the best example of this besides your car's radiator is a heat sink that goes to a laptop..some on ebay have 5 inches of 1/4" copper tube and aluminum fins on the end of it.
So now I have a 6 x CXB3590 at 3000K and 3500k along with a few Galaxyhydro 300w. I was checking out Ebay today and found a Mean Well 320 watt for $79. I kept telling myself that I already have enough light... went ahead and bought one of the thirty (free shipping). It is almost the same as the obove driver except it ends with A instead of B. (designates that the dimmer is built into the side of the unit) THIS SHIT IS ADDICTIVE.
So now I have a 6 x CXB3590 at 3000K and 3500k along with a few Galaxyhydro 300w. I was checking out Ebay today and found a Mean Well 320 watt for $79. I kept telling myself that I already have enough light... went ahead and bought one of the thirty (free shipping). It is almost the same as the obove driver except it ends with A instead of B. (designates that the dimmer is built into the side of the unit) THIS SHIT IS ADDICTIVE.
ttystikk
Well-Known Member
You're telling me.
MeGaKiLlErMaN
Well-Known Member
Check the signature... Its possible and not hard to get to... you just need more efficient BINS like the DB at 1400mA