CXB 3590 3500K build questions

[CallmeTex]

Howdy Y'all, just got my parts in the mail from the down under. Really pumped to be putting together my first DIY with more to come. Starting off with 8 cxbs being driven off a single 400w driver. I have 2 questions, is 18 awg wire thick enough to do the series connections?

My main question is what configuration would you do with these 8 being driven at 50w each, covering a 3.5'-4' deep canopy area? The room for a 4' deep canopy is there, and the width, lets just say I'm going to have to build several more of these to fill the space Hopefully replacing my 600/750 DE's

x---x---x
x---x
x---x---x
or
x--x--x--x
x--x--x--x
or
x---x---x
x-------x
x---x---x
or

Something crazy I ain't even heard about?

 

[GroDank101]

@CallmeTex Im going to be building a light for a 4x4 too, and I think I'm going to do
x---x---x---x
x---x---x---x
with cxb 3590 and 2 hlg185c1400 active cooled 36" heatsinks.

 

[CallmeTex]

Yea I like that one, cause I can just keep adding bars and it's real easy. Would you be trying to cover the whole 4x4 with 8 cobs? Is that going to be a 50w a piece?

 

[GroDank101]

Yeah I plan to use the 36v version and try to cover the whole area with 8 cobs at 50w each. I agree that its the simplest setup compared to the others.

 

[CobKits]

is 18 awg wire thick enough to do the series connections?

plenty. required wire gauge is based on current, sounds like about 1400 mA. you could go as small as 22 ga and still be fine. 18 ga is great, try to find 600V rated wire (jacket thickness is a function of voltage)

 

[resinhead]

Howdy Y'all, just got my parts in the mail from the down under. Really pumped to be putting together my first DIY with more to come. Starting off with 8 cxbs being driven off a single 400w driver. I have 2 questions, is 18 awg wire thick enough to do the series connections?

My main question is what configuration would you do with these 8 being driven at 50w each, covering a 3.5'-4' deep canopy area? The room for a 4' deep canopy is there, and the width, lets just say I'm going to have to build several more of these to fill the space Hopefully replacing my 600/750 DE's

x---x---x
x---x
x---x---x
or
x--x--x--x
x--x--x--x
or
x---x---x
x-------x
x---x---x
or

Something crazy I ain't even heard about?

I would choose the last configuration you drew.

 

[cdgmoney250]

--X--------X--
X------------X
I---------------I
I---------------I
X------------X
--X---------X--

I've been working on a design similar to this. Really trying to get as even coverage as possible.

 

[Airwalker16]

Howdy Y'all, just got my parts in the mail from the down under. Really pumped to be putting together my first DIY with more to come. Starting off with 8 cxbs being driven off a single 400w driver. I have 2 questions, is 18 awg wire thick enough to do the series connections?

My main question is what configuration would you do with these 8 being driven at 50w each, covering a 3.5'-4' deep canopy area? The room for a 4' deep canopy is there, and the width, lets just say I'm going to have to build several more of these to fill the space Hopefully replacing my 600/750 DE's

x---x---x
x---x
x---x---x
or
x--x--x--x
x--x--x--x
or
x---x---x
x-------x
x---x---x
or

Something crazy I ain't even heard about?

I'm in a 4x4.

 

[Victor6634]

Howdy Y'all, just got my parts in the mail from the down under. Really pumped to be putting together my first DIY with more to come. Starting off with 8 cxbs being driven off a single 400w driver. I have 2 questions, is 18 awg wire thick enough to do the series connections?

My main question is what configuration would you do with these 8 being driven at 50w each, covering a 3.5'-4' deep canopy area? The room for a 4' deep canopy is there, and the width, lets just say I'm going to have to build several more of these to fill the space Hopefully replacing my 600/750 DE's

x---x---x
x---x
x---x---x
or
x--x--x--x
x--x--x--x
or
x---x---x
x-------x
x---x---x
or

Something crazy I ain't even heard about?

Growmau5 has a video on YouTube that shows different configurations for different size rooms

 

[tomate]

x--x--x
--x--x--
x--x--x

 

[churchhaze]

X - - - - - - - - - - - - - XX - - - - - - - - - - - - -
-X-X- -- XX XX -- -- X`/, - `/, - `/, - `/, -`/, - `/,
-X -- -- XX XX -- -X-X-OXOXOXOXOXOXO
XXXXXXXXXXXXXXX---------------------------
---------------------------XXXXXXXXXXXXXXX
OXOXOXOXOXOXO-X -- -- XX XX -- -X-X-
`/, - `/, - `/, - `/, -`/, - `/,-X-X- -- XX XX -- -- X
X - - - - - - - - - - - - - XX-XX-XXX-XXX-XX-X

 

[Airwalker16]

X - - - - - - - - - - - - - XX - - - - - - - - - - - - -
-X-X- -- XX XX -- -- X`/, - `/, - `/, - `/, -`/, - `/,
-X -- -- XX XX -- -X-X-OXOXOXOXOXOXO
XXXXXXXXXXXXXXX---------------------------
---------------------------XXXXXXXXXXXXXXX
OXOXOXOXOXOXO-X -- -- XX XX -- -X-X-
`/, - `/, - `/, - `/, -`/, - `/,-X-X- -- XX XX -- -- X
X - - - - - - - - - - - - - XX-XX-XXX-XXX-XX-X

Dafuq?

 

[VegasWinner]

I like the first option with the two cob's centered instead of end set. IO would place the cob's at least 18" apart, 12" minimum. peace

 

[CallmeTex]

plenty. required wire gauge is based on current, sounds like about 1400 mA. you could go as small as 22 ga and still be fine. 18 ga is great, try to find 600V rated wire (jacket thickness is a function of voltage)

Thanks @CobKits this is the info I needed.

x--x--x
--x--x--
x--x--x

I like this build and will probably follow through with this @tomate. Seems like it will give a good spread with the dimensions being
3'L
x---x---x
--x---x-- 2'W to cover about a 3x4' area. Hopefully I can get started on the build this weekend. Thanks Y'all
x---x---x

 

[GroDank101]

@CallmeTex What length and type of heatsinks are you getting?

 

[CallmeTex]

@GroDank101 I have the anodized pin fin heat sinks from Cutter. Already drilled and tapped and ready to rock. I just need to pick up the angled aluminum and get to work now

I'm in a 4x4.
View attachment 3749868

Nice build man, Looks like you've got plenty photons there for a 4x4. I think I may sandwich this first build in between 2 Gavitas giving me around 11' x4' of canopy space. Eventually I want to rid myself of of HID and roll full cob like a lot of you fellas are doin.

 

[CallmeTex]

--X--------X--
X------------X
I---------------I
I---------------I
X------------X
--X---------X--

I've been working on a design similar to this. Really trying to get as even coverage as possible.

Yo money are the x's the cobs, could you explain yourself a little more here?

 

[cdgmoney250]

Yo money are the x's the cobs, could you explain yourself a little more here?

Yes. Basically, all the other configurations are going to have a center 'hot spot' of light intensity that degrades towards the perimeter of the foot print. Spacing the chips correctly would provide extremely even coverage from this layout, keeping PPFD uniformity in mind. The idea is that crossover from all of the light beams will match irradiance from the center to the edge of the foot print, at given distances to the canopy. Here is another drawing showing what I'm talking about.

 

[BM9AGS]

Yes. Basically, all the other configurations are going to have a center 'hot spot' of light intensity that degrades towards the perimeter of the foot print. Spacing the chips correctly would provide extremely even coverage from this layout, keeping PPFD uniformity in mind. The idea is that crossover from all of the light beams will match irradiance from the center to the edge of the foot print, at given distances to the canopy. Here is another drawing showing what I'm talking about.View attachment 3750799

No lenses of course looks cool!

 

[CallmeTex]

@cdgmoney250 How big would the square frame be? This is a very interesting design, novel but needs to be tried for sure!