Which Rosin Press to buy for home use

[HydroGrowLover]

http://www.newvape.com/errl-rosin-press/rosin-press-kits/

https://xtractordepot.com/products/mr-rosin-press

https://www.google.com/?gws_rd=ssl#q=rosin+press&newwindow=1&tbm=shop

 

[DemonTrich]

Harbor junk 20 ton, 3x5 plates from low temp plates. Baggies from sho bags. Don't forget to upgrade the grade 4 hardware to grade 10 for safety reasons.

Done

 

[Airwalker16]

http://www.newvape.com/errl-rosin-press/rosin-press-kits/

https://xtractordepot.com/products/mr-rosin-press

https://www.google.com/?gws_rd=ssl#q=rosin+press&newwindow=1&tbm=shop

You like that nextlight?

 

[Airwalker16]

$450 for 5x3 plates... um no.

 

[DemonTrich]

You get what you pay for in this line of work. Shit my.power bills are 900/mo. 450 is pocket chnage6

 

[Airwalker16]

You get what you pay for in this line of work. Shit my.power bills are 900/mo. 450 is pocket chnage6

You can easily McGyver some for much less

 

[DemonTrich]

Ok
have fun

 

[HydroGrowLover]

You like that nextlight?

I'm about to buy another nextlight, so yea I like it.

 

[HydroGrowLover]

Harbor junk 20 ton, 3x5 plates from low temp plates. Baggies from sho bags. Don't forget to upgrade the grade 4 hardware to grade 10 for safety reasons.

Done

With those baggies can I do trim?

What do you mean upgrade from grade 4 to grade 10?

 

[HydroGrowLover]

Why do I need sho bags, wont parchment paper work?

 

[Airwalker16]

That's cool. What's the footprint like for flower on that nextlight?

 

[HydroGrowLover]

This is 3 plants and covers about 6x6 area but the light really penetrates the 3x3 area deeply.

 

[HydroGrowLover]

to bad its out of stock =(

 

[WarMachine]

I don't hear too much good things about the d-nail so def read up more on it just in case.

 

[Carolina Dream'n]

BestValueVacs has a good 5x5 for a decent price.

 

[Yodaweed]

BestValueVacs has a good 5x5 for a decent price.

to bad its out of stock =(

Those t-shirt presses don't exert enough pressure to make good rosin.

 

[swiftkillpapa]

http://m.harborfreight.com/12-ton-a-frame-industrial-heavy-duty-floor-shop-press-1667.html?utm_referrer=direct/not provided

https://m.newegg.com/Product/index?itemnumber=9SIA0U00AF5602&nm_mc=KNC-GoogleMKP-Mobile&cm_mmc=KNC-GoogleMKP-Mobile-_-pla-_-Industrial+Vehicle+-+Maintenance-_-9SIA0U00AF5602&gclid=CjwKEAjwudW9BRDcrd30kovf8GkSJAB3hTxFrtywGlSxN_5e5C9gE1lTfX1PadETdtz3xJlxzipBARoCJCzw_wcB&gclsrc=aw.ds

http://www.ebay.com/itm/252419040603
uxcell® AC 110V 500W 8 x 120mm Heating Element Mould Cartridge Heater

https://www.amazon.com/dp/B0087ZUO0G/ref=cm_sw_r_sms_awd_x_buGTxbN6VGZWF

https://www.metalsdepot.com/products/alum2.phtml?page=flat&LimAcc= &aident=

Make it yourself

 

[Airwalker16]

http://m.harborfreight.com/12-ton-a-frame-industrial-heavy-duty-floor-shop-press-1667.html?utm_referrer=direct/not provided

https://m.newegg.com/Product/index?itemnumber=9SIA0U00AF5602&nm_mc=KNC-GoogleMKP-Mobile&cm_mmc=KNC-GoogleMKP-Mobile-_-pla-_-Industrial+Vehicle+-+Maintenance-_-9SIA0U00AF5602&gclid=CjwKEAjwudW9BRDcrd30kovf8GkSJAB3hTxFrtywGlSxN_5e5C9gE1lTfX1PadETdtz3xJlxzipBARoCJCzw_wcB&gclsrc=aw.ds

http://www.ebay.com/itm/252419040603
uxcell® AC 110V 500W 8 x 120mm Heating Element Mould Cartridge Heater

https://www.amazon.com/dp/B0087ZUO0G/ref=cm_sw_r_sms_awd_x_buGTxbN6VGZWF

https://www.metalsdepot.com/products/alum2.phtml?page=flat&LimAcc= &aident=

Make it yourself

Can you elaborate a little bit more on what you do with those parts exactly?

 

[doublejj]

20 Ton Harbor Freight shop press, converted to air/hydrolic & 5x7 Low Temp plates.....

 

[HydroGrowLover]

20 Ton Harbor Freight shop press, converted to air/hydrolic & 4x7 Low Temp plates.....

Does that require an air compressor to run or is it plug and play?