Horrorshow

Joe Blows Trees

Joe Blows Trees

Well-Known Member
My first lady I hit isn't the prettiest, but they're some unattractive people with some beautiful children so I'm hoping for the best. Unfortunately, I don't know who the father is because I pimped her out to four different males, Jamaican Pearl, raspberry cough, bubblegum, and sour smurf and by the time I noticed she was pregnant, all the males had open sacs. I'll share some pictures of her seeds and her before chopping.

Thankfully, I have a beautiful purple haze clone this go around so I'll share pictures of her progress from pollination to harvest. Thanks for the invitation.
 
.Pinworm.

.Pinworm.

Well-Known Member
DSCF3210.JPG
Capture.PNG

Got the big tent rigged up to a 30g Maxsea 16-16-16 @ 600ppm reservoir with a sub-pump on a timer. Still trying to dial that in. I am thinking 7 separate 5min squirts during the 24h cycle is working best (so far anyways). Keeps em wet, but not drenched. Now that the veg cab, and all the tents are automated, I don't have to shred my back and neck every morning bending over to water/feed 60+ pots. Stoked.

About to do some training, then flip these White Fire OG - have a few cameras lapsing. It looks pretty cool so far.
 
Mellowman2112

Mellowman2112

Well-Known Member
.Pinworm. said:
View attachment 3761921
View attachment 3761914

Got the big tent rigged up to a 30g Maxsea 16-16-16 @ 600ppm reservoir with a sub-pump on a timer. Still trying to dial that in. I am thinking 7 separate 5min squirts during the 24h cycle is working best (so far anyways). Keeps em wet, but not drenched. Now that the veg cab, and all the tents are automated, I don't have to shred my back and neck every morning bending over to water/feed 60+ pots. Stoked.

About to do some training, then flip these White Fire OG - have a few cameras lapsing. It looks pretty cool so far.
Click to expand...

Sweet setup pinworm.
 
Flaming Pie

Flaming Pie

Well-Known Member
I forgot i subbed to this lol.

Whats new buggaboo? What's going on with that mason jar? I definitely need to up my clone game. It is frustrating the fuck outta me. Lol.

I feel like I was better at cloning 2 years ago.
 
.Pinworm.

.Pinworm.

Well-Known Member
Flaming Pie said:
I forgot i subbed to this lol.

Whats new buggaboo? What's going on with that mason jar? I definitely need to up my clone game. It is frustrating the fuck outta me. Lol.

I feel like I was better at cloning 2 years ago.
Click to expand...
Not a hell of a lot. The jar works perfect for cuts that I plan on spraying with CS. It's "portable", so it keeps me from accidentally hitting any of the others in the tray. If I get bored enough, I might see how much I can pull flowering something in it. bongsmilie

DSCF3092.jpg

Some Strawberry Sour D that turned out pretty killer. Not much else going on as of right now. I should have some frosty pollinated fem shots to post here soon.
 
Flaming Pie

Flaming Pie

Well-Known Member
.Pinworm. said:
Not a hell of a lot. The jar works perfect for cuts that I plan on spraying with CS. It's "portable", so it keeps me from accidentally hitting any of the others in the tray. If I get bored enough, I might see how much I can pull flowering something in it. bongsmilie

View attachment 3769837

Some Strawberry Sour D that turned out pretty killer. Not much else going on as of right now. I should have some frosty pollinated fem shots to post here soon.
Click to expand...
Can you post your method with the jars?

Stone? Gpm pump? Cutting submerged or only enough water to create bubble mist?
 
.Pinworm.

.Pinworm.

Well-Known Member
Flaming Pie said:
Can you post your method with the jars?

Stone? Gpm pump? Cutting submerged or only enough water to create bubble mist?
Click to expand...
First one was a prototype. I've built a couple more since then:

DSCF3263.JPG

I cut out a 3 1/4" piece of scrap plastic.

DSCF3265.JPG

Shoved it in the cap, and screwed it on tight.

DSCF3266.JPG

Used a 1 3/4' hole saw to cut a spot for the 2" foam collar.

DSCF3268.JPG

Also put a 1/4" hole off to the side for air-tube access.


Here's what it looks like without the glass covered. I used plain tin foil, but you can use black duct tape, foil tape, etc. - whatever you have laying around. I don't use a stone, and it doesn't seem to matter. Don't see any reason why you couldn't if you wanted though. I let the cutting hover about an inch to 1/2" over the bubbles (cheap 5w aquarium pump). Depending on strain, I usually see roots forming within like 8-10 days.
 
Flaming Pie

Flaming Pie

Well-Known Member
.Pinworm. said:
First one was a prototype. I've built a couple more since then:

View attachment 3769959

I cut out a 3 1/4" piece of scrap plastic.

View attachment 3769957

Shoved it in the cap, and screwed it on tight.

View attachment 3769956

Used a 1 3/4' hole saw to cut a spot for the 2" foam collar.

View attachment 3769958

Also put a 1/4" hole off to the side for air-tube access.


Here's what it looks like without the glass covered. I used plain tin foil, but you can use black duct tape, foil tape, etc. - whatever you have laying around. I don't use a stone, and it doesn't seem to matter. Don't see any reason why you couldn't if you wanted though. I let the cutting hover about an inch to 1/2" over the bubbles (cheap 5w aquarium pump). Depending on strain, I usually see roots forming within like 8-10 days.
Click to expand...
Very cool. I like it. I will be saving this page for future experimentation. The heat wave I had comprised my batch of clones. Looking better now with bleached system and fresh cuttings. I am about to take more as well.

I am not sure I like the pump I have. I feel like it has too muchh pressure. It was a generic cloner I turned into a mister. Now with it cleaned and remembering to scrape the stems I am hoping to see roots starting in a couple days.
 
You must log in or register to reply here.
Top