Pictures of your DIY lights - Post your pics!!!

Qjay420

Qjay420

Well-Known Member
Dude how's you light sabers gonna cover your Canapy. Go back to star wars thread your in the wrong place. I saw that on you tube Bro. Common
 
Malocan

Malocan

Well-Known Member
hello guys,
i would like to share some picture of my new led fixture,
big thanks @robincnn from Northern Grow Lights for nice customer service and of course for products.

I used for my light.
-6pcs vero 29c/3000k/90cri
-6pcs sst 140
-6pcs khatod lens with metal holder
-alu profile
-1-10 volt dimmer
-hlg-240c-1050b

i did build 2 bars, nothing really special at this build, was easy to build and has clean look.
I did hide all wires in the aluminum profile and used again remote driver on this light.
the combo of sst 140 with vero29 and khatod lens is really mega easy to install, just nice.
And thanks robin for the vero29 tim template, worked really well for me...
 

Attachments

alesh

alesh

Well-Known Member
Malocan said:
hello guys,
i would like to share some picture of my new led fixture,
big thanks @robincnn from Northern Grow Lights for nice customer service and of course for products.

I used for my light.
-6pcs vero 29c/3000k/90cri
-6pcs sst 140
-6pcs khatod lens with metal holder
-alu profile
-1-10 volt dimmer
-hlg-240c-1050b

i did build 2 bars, nothing really special at this build, was easy to build and has clean look.
I did hide all wires in the aluminum profile and used again remote driver on this light.
the combo of sst 140 with vero29 and khatod lens is really mega easy to install, just nice.
And thanks robin for the vero29 tim template, worked really well for me...
Click to expand...
Nice. I'm going to build a very similar light (Vero 29C 3000K/90CRI + Khatod lens). I understand you're from Germany, right? Did you get everything from @robincnn or locally?
 
Malocan

Malocan

Well-Known Member
alesh said:
Nice. I'm going to build a very similar light (Vero 29C 3000K/90CRI + Khatod lens). I understand you're from Germany, right? Did you get everything from @robincnn or locally?
Click to expand...
yeah im from germany, i bought just the heatsink from robincnn. The other stuff i bought from digikey, when i bought khatod lens robin didnt had them at his onlinestore. i bought them long time ago
 
Malocan

Malocan

Well-Known Member

Attachments

randydj

randydj

Well-Known Member
I am building my first DIY COB ( you may have seen my thread "Is it possible to build a good COB LED light for a grow tent 3x3x5 for under $200.00?) Well the answer was no but I am doing it for less than $325.00. MEAN WELL HLG-185H-C1400B 1400mA $54.00 x 2 = $108.00 Mouser, ARCTIC Alpine 64 GT Rev. 2 8x$8.00= $64.00 Amazon, CLU048-1212C4-353H6K2 $10.30 x 8= $82.10 EBay.

My question is this: where can I mount a thermal switch on the alpine 64 heat sink to protect the cob from fan failure? Milling out the fins to mount it behind the lamp seems counter productive. will it be accurate enough to mount it on the face near the cob? Members with practical experience have probably done this before and can save me a lot of time with your knowledge.

Thanks,
 
randydj

randydj

Well-Known Member
Dawg

Ok I have lots of room on the sides. I just did not know if the heat transfer would be fast enough to trip the thermal switch before the cob got too hot in a fan failure.
 
You must log in or register to reply here.
Top