Is there anything currently better then amare?

Hybridway

Well-Known Member
Your post count in this thread says otherwise.
Yet, I'm like the only person here who actually owns what he's recomending (aside from my Amare family members) & am slammed by guys that don't even have one grow under their DIY light yet, that came pre-fab.
What, am I not supposed to respond?
It's a shame that any other recommendation here doesn't have someone that owns the light to back it up or even post results.
 
Last edited:

OLD MOTHER SATIVA

Well-Known Member
That picture is mine which he helped himself to and yes I have a personal preference for Sativas. I have a high tolerance and just enjoy the feeling of medicating with them vs the Indica dominant plants. The plants in that pic are testers I am running for a breeder. I have the same strains under a 1K HPS on the other side of the flower area and will compare the grows at the end, the HPS side is a couple weeks behind the LED side. ............

and beautiful it is..!

my body need sativas lokemyounare growing too

i hope you pic wasn't reposted to "prove" that the DIY light isn't doing good..because it sure is..

well unless somebody doesn't

know a long flower sativa from the "other "kind[jk]
 

ttystikk

Well-Known Member
You should see what Amare has in store for us very soon.
As I said, he's always ontop of upgrades & improvements. Staying ahead of the pack constantly.
GTFO, shill boy. 15 pages of everyone telling you is behind the current tech and you're STILL gonna trout out that salesy bullshit?

BACK OF THE LINE. NO CREDIBILITY FOR YOU!
 

Danielson999

Well-Known Member
Crap posts like this kill this forum. I can't believe the mods allow it. Come on over to AFN and try spewing your crap. Good and bad people naturally congregate to each other, its a fact. Which forum is which?
You forgot to tell us why your grow journal shows multiple lights (hidden in wall reflections in a couple pics) growing your 'over 1lb' of weed with only a single Amare SE450. 19 pages of a grow journal without one showing your Amare other than the first post when you set it up.
So, before you head back to the forum with all the happy and positive people could you explain this? You told everyone you got 471g from ONE Amare SE450, but your pictures say otherwise. I guess that makes your 1gpw closer to what, .5gpw in reality with that Amare?
 

Evil-Mobo

Well-Known Member
and beautiful it is..!

my body need sativas lokemyounare growing too

i hope you pic wasn't reposted to "prove" that the DIY light isn't doing good..because it sure is..

well unless somebody doesn't

know a long flower sativa from the "other "kind[jk]
Thanks for the kind words. :) I have no idea as to the intent of another person posting a pic from my grow lol. The bigger of the plants listed went in @ 24" from the top of the soil and yesterday she was 70" Hell of a stretch huh. I am running Sasquatch X Malawie and Timenfaya Devil X Original Haze.

The HPS side has a Blue Dream Fem and a Green Love Potion cut too. It is both my first run under DIY COB and first run in no till soil. I am enjoying both and the no till and HPS is a hell of a combo as well. We will see what the smoke and harvest is like but at the current time I would still favor the less popular opinion between the two lights.
 

ttystikk

Well-Known Member
Yet, I'm like the only person here who actually owns what he's recomending (aside from my Amare family members) & am slammed by guys that don't even have one grow under their DIY light yet, that came pre-fab.
What, am I not supposed to respond?
It's a shame that any other recommendation here doesn't have someone that owns the light to back it up or even post results.
I certainly do own what I recommend and I'm sure many of the others on this thread do, too.

These facts make you a liar, as well as a shill.

You want kneepads? They gotta be sore by now, what with you sucking Amare cock for so long...
 

ttystikk

Well-Known Member
You forgot to tell us why your grow journal shows multiple lights (hidden in wall reflections in a couple pics) growing your 'over 1lb' of weed with only a single Amare SE450. 19 pages of a grow journal without one showing your Amare other than the first post when you set it up.
So, before you head back to the forum with all the happy and positive people could you explain this? You told everyone you got 471g from ONE Amare SE450, but your pictures say otherwise. I guess that makes your 1gpw closer to what, .5gpw in reality with that Amare?
I will; HE'S LYING.

It begs the question, what else is he lying about?
 

ttystikk

Well-Known Member
You should see what Amare has in store for us very soon.
As I said, he's always ontop of upgrades & improvements. Staying ahead of the pack constantly.
Shit. At this rate, you'll be touting the wonders of flaming oil soaked rags on a stick.

Stop quoting me, shill.
 

Hybridway

Well-Known Member
Every time you use the lighting passport it shows PPFD.....

The picture below is a single point reading. Furthermore what Area did he test the Florida Sun in?

Besides wear if that PPFD measurement was multiple points. Even the way you calculated PPFD was incorrect as you counted all points on the grid equally. This is not the proper way to calculate PPFD as each point on the grid doesn't represent the same surface area. The only proper way to calculate PPFD is a Goniophotometer in all honestly. That's why I asked for that test. Once again not trying to bust your balls. Don't get me wrong a PAR Chart is handy in knowing how the particular light distributes it's output. It doesn't however tell the whole story by averaging the numbers up. I mean honestly the Maximizer looks awesome this way. I don't publish that as factual data because it's misleading. View attachment 3850208
I forgot where on Florida the test was done. It's such a hassle to dig through my e-mails.
Every time you use the lighting passport it shows PPFD.....

The picture below is a single point reading. Furthermore what Area did he test the Florida Sun in?

Besides wear if that PPFD measurement was multiple points. Even the way you calculated PPFD was incorrect as you counted all points on the grid equally. This is not the proper way to calculate PPFD as each point on the grid doesn't represent the same surface area. The only proper way to calculate PPFD is a Goniophotometer in all honestly. That's why I asked for that test. Once again not trying to bust your balls. Don't get me wrong a PAR Chart is handy in knowing how the particular light distributes it's output. It doesn't however tell the whole story by averaging the numbers up. I mean honestly the Maximizer looks awesome this way. I don't publish that as factual data because it's misleading. View attachment 3850208
Thanks about the ppfd lesson. Could you post the equation for the proper way to do it using a par-meter.
Oh, BTW, no pun intended, but you may wanna check into Fluence Bio fixtures. They have a light called the Razor too.
What's that one, your Quantum Board?
 

KarmaPaymentPlan

Well-Known Member
I forgot where on Florida the test was done. It's such a hassle to dig through my e-mails.


Thanks about the ppfd lesson. Could you post the equation for the proper way to do it using a par-meter.
Oh, BTW, no pun intended, but you may wanna check into Fluence Bio fixtures. They have a light called the Razor too.
What's that one, your Quantum Board?
you do realize that most people have the issue with you and not Amare itself. the more incompetent dribbling you do the worse you make your company look
 

Hybridway

Well-Known Member
GTFO, shill boy. 15 pages of everyone telling you is behind the current tech and you're STILL gonna trout out that salesy bullshit?

BACK OF THE LINE. NO CREDIBILITY FOR YOU!
That means every company is behind too then seeing how it's brand spanking new. Except for maybe a DIY pre-fab comp. that allows to to pick which cob you want.
Is there any company that's using the brand new cobs or are they all still using Cree?
Geeze, you don't even give them a chance to upgrade before going around calling the same cobs you were masterbating to 2 months ago old tech. Your reaching for straws guy. It's pathetic.
Like I said, Victor is one of the quickest to upgrade in the industry & already has 2 lights ready to hit the mkt w/ improvements & upgrades.
So, what are you gonna say then when his lights come out before any other company has upgraded?
And why do you hate so bad? You call me a shill yet i have only posted facts & actually own the lights I recommend, w/o knocking other companies at that.
But you cannot muster up that much class yourself? Ha! The only word that comes to mind is pathetic.
Why try so hard to put others down?
I've given several other companies props & even recommended looking into Fluence if he prefers the enhanced spectrum.
You guys are stuck on recomending only DIY pre-fabs using the newest untested in a grow tech out that no other company has even switched to yet.
When the OP specifically said he wants a manufactured fixture, prefers a good warranty, $'s not an object, & he'd like it to work well w/ the fixture he already owns & likes, an Amare.
So for Gods Sake, recommend him something based on his requirements instead of focusing on changing the topic.
 

Hybridway

Well-Known Member
you do realize that most people have the issue with you and not Amare itself. the more incompetent dribbling you do the worse you make your company look
Example please? I'd really like to correct any character flaws I have so that you guys like me. No, really. It means so much more to me then getting the truth out there.
 

KarmaPaymentPlan

Well-Known Member
But you cannot muster up that much class yourself? Ha! The only word that comes to mind is pathetic.
Why try so hard to put others down?
Example please? I'd really like to correct any character flaws I have so that you guys like me. No, really. It means so much more to me then getting the truth out there.
classy ever looked in the mirror cuz your really a shitty online persona
btw
@Hybridway

can you share some of this extensive testing Victor has done?
you know back up your claims since you wont acknowledge this question in the other thread
 

ttystikk

Well-Known Member
That means every company is behind too then seeing how it's brand spanking new. Except for maybe a DIY pre-fab comp. that allows to to pick which cob you want.
Is there any company that's using the brand new cobs or are they all still using Cree?
Geeze, you don't even give them a chance to upgrade before going around calling the same cobs you were masterbating to 2 months ago old tech. Your reaching for straws guy. It's pathetic.
Like I said, Victor is one of the quickest to upgrade in the industry & already has 2 lights ready to hit the mkt w/ improvements & upgrades.
So, what are you gonna say then when his lights come out before any other company has upgraded?
And why do you hate so bad? You call me a shill yet i have only posted facts & actually own the lights I recommend, w/o knocking other companies at that.
But you cannot muster up that much class yourself? Ha! The only word that comes to mind is pathetic.
Why try so hard to put others down?
I've given several other companies props & even recommended looking into Fluence if he prefers the enhanced spectrum.
You guys are stuck on recomending only DIY pre-fabs using the newest untested in a grow tech out that no other company has even switched to yet.
When the OP specifically said he wants a manufactured fixture, prefers a good warranty, $'s not an object, & he'd like it to work well w/ the fixture he already owns & likes, an Amare.
So for Gods Sake, recommend him something based on his requirements instead of focusing on changing the topic.
TL;DR

Shill, shill, shill that trash!

You should go work for Mars Hydro. At least they have a marketing budget.
 

PetFlora

Well-Known Member
That means every company is behind too then seeing how it's brand spanking new. Except for maybe a DIY pre-fab comp. that allows to to pick which cob you want.
Is there any company that's using the brand new cobs or are they all still using Cree?
Geeze, you don't even give them a chance to upgrade before going around calling the same cobs you were masterbating to 2 months ago old tech. Your reaching for straws guy. It's pathetic.
Like I said, Victor is one of the quickest to upgrade in the industry & already has 2 lights ready to hit the mkt w/ improvements & upgrades.
So, what are you gonna say then when his lights come out before any other company has upgraded?
And why do you hate so bad? You call me a shill yet i have only posted facts & actually own the lights I recommend, w/o knocking other companies at that.
But you cannot muster up that much class yourself? Ha! The only word that comes to mind is pathetic.
Why try so hard to put others down?
I've given several other companies props & even recommended looking into Fluence if he prefers the enhanced spectrum.
You guys are stuck on recomending only DIY pre-fabs using the newest untested in a grow tech out that no other company has even switched to yet.
When the OP specifically said he wants a manufactured fixture, prefers a good warranty, $'s not an object, & he'd like it to work well w/ the fixture he already owns & likes, an Amare.
So for Gods Sake, recommend him something based on his requirements instead of focusing on changing the topic.
I can tell you from experience (and getting severely ridiculed) being the first to have a BML SPYDR 600 where I chose the spectrums. It was 90% CW/NW/WW diodes, the rest 450s and 630s. Don't have to be a rocket scientist to understand that the mix would grow some fine medicine. I started a RIU thread showing weekly picture updates

And, yet the jackals screamed UNTESTED. One went as far as to blast me to Nick's (BML) face at a show. So, taking a shot because something is untested but of good spec doesn't hold much water here. Many of them did the same when I started using Amare lights
 
Top