Stephenj37826
Well-Known Member
Are those cases bi enough, looks like 12x12" only
Not sure what way they swing honestly
Are those cases bi enough, looks like 12x12" only
LOLNot sure what way they swing honestly
That's what she saidLOL
How big are those QB boards?
OH Ok I thought they were bigger, those cases could work thenThat's what she said
- Dimensions 6.833" x 11.25"
Just wondering if the 4k will be the exact same size as the existing boards so I can start prebuilding a frame using my boards I have now as a template or if I should wait.
Sort of like a shoe box dimension. A little less longer and a little wider than a shoe box.OH Ok I thought they were bigger, those cases could work then
YepThat is awesome and crazy. Do your COBs run that cool?
depends on your shoe size, Shaq's shoe box would be a lot bigger than QB boards.Sort of like a shoe box dimension. A little less longer and a little wider than a shoe box.
With a heatsink attached ... It is like a standard piece of paper.LOL
How big are those QB boards?
How are you driving these, single? Are these runn in series or parallelI have 4 QB's pulling about 245 watts in a 3x3 tent and canopy temps are 3 to 4 degrees above room temp,usually about 75 room temp.
No all in parallel. You'll want the 1400 if you want to do it the way you listed above.Just confirming some stuff here before purchasing (stay tuned for a grow journal).
Four of these should work with a HLG-320h-c2800b right? Two in series then parallel?
Hey i never got confirmation i will be safe and what my per board wattages will be using the hlg 240-c1750b and 2 xqb in parallel. Is this acceptable and safe to do with these? And someone mentioned it being 125w per board, can you confirm please?No all in parallel. You'll want the 1400 if you want to do it the way you listed above.
Napalm interested to see how you do with them, I'm loving mine so far. Are you going to document this grow ?The eagle has landed. These things are awesome! Thanks @robincnn and @Stephenj37826!
Just took these cuts of Underdog og out of the clone dome and transplanted them into 1 gallon pots. Will veg them 5 to 7 days so they can plant their feet, then flip. My goal is 30gr+ a plant.
Have the 320 driver on lowest setting pulling about 110w. Will go up to 200w when I flip.
View attachment 3869759
Yes you'll be fine. It will be around 100 watts per board. You'll need (240)c1050(series)/c2100(Parallel) to fully utilize the driver.Hey i never got confirmation i will be safe and what my per board wattages will be using the hlg 240-c1750b and 2 xqb in parallel. Is this acceptable and safe to do with these? And someone mentioned it being 125w per board, can you confirm please?