1st grow help!

N

Norty86

Member
Just found this today? I just flipped my plants into flower and changed to LED. Is this deficiency or did I burn it? Should I snip them? Also I just gave them full muted for the first time... when they were babies I did 1/3 strength then 2/3 now I went to flower and went to full strength and this happend. Also humidity jumped into the 70s for a couple days. Thanx guys. 1st grow newbie here!
 

Attachments

Morth

Morth

Well-Known Member
Do you remember a water droplet there when the lights were on. I'm a total noob but thought I had a prob and it turned out to be water on the leave causing it to burn.
 
Cx2H

Cx2H

Well-Known Member
Bro, looking at your pix it has round rust circles mixed in what looks like pH swinging. Purple streaks as well. I run purple stains non stop and the streaks are most likely ca:mg. Keep an eye on it.
 
Last edited:
N

Norty86

Member
Cx2H said:
Bro, looking at your pix it has round rust circles mixed in what looks like pH swinging. Purple streaks as well. I run purple stains non stop and the streaks are most likely ca:mg. Keep an eye on it.
Click to expand...
Should I pull it? Snip it ?
 
Wicked_One

Wicked_One

Well-Known Member
No it will be fine it's a cal-mag problem for sure.
Either your PH is off a bit and locking it out... or you need to add some.
 
pockitsPM

pockitsPM

Well-Known Member
Are you in soil? Most smart people would suggest trying fixing one thing at a time to make sure that was really the issue...if you change your ph, add mg cal, and raise your lights at the same time and the problem is fixed your not going to know which of the three it was ...but that's exactly what I keep doing lol
 
N

Norty86

Member
pockitsPM said:
Are you in soil? Most smart people would suggest trying fixing one thing at a time to make sure that was really the issue...if you change your ph, add mg cal, and raise your lights at the same time and the problem is fixed your not going to know which of the three it was ...but that's exactly what I keep doing lol
Click to expand...
I raised the light 6" and now adding 5tsp at a time of cal/mag slowly throughout the day . Dose on the back says 5tsp per gallon for nute deficiencies but that would mean 5X30 150 tsp wtf.. seems like if I do that I'll lock it out. Any advice on a good folder spray that won't do damage? Thank you all! My medicine is saving my life... i am in hydro DWC and bubble ponics. Didn't get a problem until I switched to flower nutes.
 
Cx2H

Cx2H

Well-Known Member
Norty86 said:
I raised the light 6" and now adding 5tsp at a time of cal/mag slowly throughout the day . Dose on the back says 5tsp per gallon for nute deficiencies but that would mean 5X30 150 tsp wtf.. seems like if I do that I'll lock it out. Any advice on a good folder spray that won't do damage? Thank you all! My medicine is saving my life... i am in hydro DWC and bubble ponics. Didn't get a problem until I switched to flower nutes.
Click to expand...
Greetings, sounds like an off brand calmag, botanicare is 5mL per gallon. I use my same calmag for roots as spray at recommend. Can't say for your brand. I mix up a half gallon for spray at 5mL per and one capful of liquid seaweed. Streaks and spots vanish with in 7 days
 
N

Norty86

Member
Cx2H said:
Greetings, sounds like an off brand calmag, botanicare is 5mL per gallon. I use my same calmag for roots as spray at recommend. Can't say for your brand. I mix up a half gallon for spray at 5mL per and one capful of liquid seaweed. Streaks and spots vanish with in 7 days
Click to expand...

I will give this a shot! I'm thankful for all the advice! Also my cabinet is getting into the 75% humidity range unless I keep the doors open then it stays around 45-50%. Any tips on how to mitigate this issue as well? I really don't want PM?
 
N

Norty86

Member
Norty86 said:
I will give this a shot! I'm thankful for all the advice! Also my cabinet is getting into the 75% humidity range unless I keep the doors open then it stays around 45-50%. Any tips on how to mitigate this issue as well? I really don't want PM?
Click to expand...
Also I am using the B.C brand of everything someone said try this and me not knowing any different tried it... now this.
 
You must log in or register to reply here.
Top